It is possible that the MSC is not sending the channel type it
needs for the operations it wants to do. Add a configuration option
to assign a TCH in case of paging any requests. It can be a good
idea to leave SDCCHs free for location updating requests and use
the TCH for SMS-MT and CC-MT.
Store the mapping from request to channel type in the GSM Network
struct as there is some policy involved with handling the request.
E.g. in a half rate network we don't want emergy calls to be getting
a TCH/F, or we want to have a different policy for early/late assignment
of phone calls. Update the table when creating the network and when
the neci is changed.
Also, make sure the bit ordering in the pre-computed MA is correct,
as well as the cell channel description of the target cell being
present in the HO CMD.
We now compute the Cell Channel Description for SI 1 by bit-wise
OR of the ARFCN bitmask of each timeslot on all the TRX of the BTS.
Also, support generating a GSM 04.08 Channel Description IE for
the hopping case (with HSN/MAIO instead of ARFCN).
What's still missing now: Sending the 04.08 Mobile Allocation IE
Do not use the lchan for the paging but operate on the
subscriber_connection, change the signals too to not carry
the lchan but the subscriber connection... the silent call
and vty code still assume there is a lchan inside the
subscriber connection.
* gsm_04_08_utils.c will directly send the message...
* gsm_04_08.c will use the DTAP API, add a new method to pull
in the data from the transaction...
This is a generic MI extraction for the MI if it is followed
after a classmark. For the Phase1 Phones the classmark2 is not
four bytes but it might be different. This code can be used
by the CM Service Request handling as well.
We go from no size checks to some content checking. We should
refactor the whole classmark2 + mi parsing that is used throughout
the code into one place with proper size checking. This is the
start and requires a new libosmocore as well.
Change the MSC transaction code to operate on a GSM Subscriber Connection
instead of the lchan. This will help us to separate the two commands properly.
This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
This is useful information to know and actually fixes a segfault
in rllp.c where lchan is accessed even tough it could be NULL in
case of failure.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This is needed by a yet-to-be-implemented handover algorithm, after
it has allocated a new lchan for the MS. Also missing: handling
the actual HANDOVER COMPLETE / FAIL messages in response.
Both GSM 04.08 RR and GSM 08.58 RSL need the multirate config
in the channel modify. Place the config in the lchan, change
the gsm48 methods to not take the argument, change the RSL
implementation to make use of it with the right IE.
The other code should use the t(l)v_put routines as well but
were left untouched for now.
IPA is naming these functions CRCX, MDCX, DLCX to follow
the naming of the MediaGatewayControlProtocol. Change the
code to go from BIND to CRCX (create connection) and from
CONNECT to MDCX (modify connection).
Connect indicates that it is only possible to call it once
while it is possible to call it more than once to modify
the audio parmaters and such. So the IPA terminology is
making a bit more sense here (now that we know it).
On channel mode modify and assignment command when using
the a multirate code the multirate configuration must be
present in the packet.
Add a parameter and add a warning when using it in a
broken way.
Allow to handle the channel requested differently based
on the NECI value for the "paging any" case. This will allow
to open a TCH/H, TCH/F depending on the neci mode.
Use the correct length when going over the array instead
of using the neci0 values. Remove the fixme from the method
as well as the issue has been addressed by adding a parameter
to the method.
Be able to send RR CHANNEL MODIFY from the BSC/MSC code
as well. Move the method that knows about the IPAccess RTP
and issues the "bind" to the utils tool
Add code to generate an assignment command for a given lchan. It
is expected that the lchan is modified already and the mode will
be picked up from their. Currently only the mandantory items
are supported.
Add one method to extract the MI which will allow to load
the gsm_subscriber depending on the MSC/BSC setup and then
use gsm48_handle_paging_resp to finish the paging response
handling.