RR Messages like STATUS, GPRS SUSPEND, HANDOVER COMPLETE/FAIL, ...
should be processed on the BSC side of things, not on the MSC side.
This is among other things required in preparation of intra-BSC
hand-over support in osmo-bsc.
Introduce number rewriting of SMS-SUBMIT. Introduce a new list,
move code around to help with finding a new number, somehow the
number encoding for TP-DA is borked, 03.40 references 04.11 but
the length appears to be strlen(number) without taken the type
field into account.
In case of a reset (loss of the BTS) close down all remaining
RTP Proxy sockets. In case of a lchan_free shout if the rtp
proxy is still open. I would prefer if the proxy code sits inside
the gsm subscriber connection.
gsm_data_shared.h includes e1_input.h of libosmo-abis, add the
LIBOSMOABIS_CFLAGS to Makefile.am, remove AM_LDFLAGS at the same
time as we only build .a archives.
Increase the version number and send the sizeof of the gsm_mncc
and the gsm_data_frame structure. Include the offsets of some
members as well to maybe identify ABI problems.
The reason we go through this is that we want to benefit from
the native ABI and don't want to force packed structs.
In case of a memory allocation failure in rsl_rx_chan_rqd we would
have left the channel in the LCHAN_S_ACT_REQ state. Move the state
change below the allocation.
In case a BTS does not send the RF Channel Release ACK and we are
closing the channel because of an error two timers are running to
set the state back to none.
Make lchan_deact_tmr_cb and rsl_rx_rf_chan_rel_ack behave the same
in regard to changing the state of the lchan. For the other direction
we are save, the error path will set the state to NONE and the timeout
will call lchan_free to set the channel type back to NONE, only then
the lchan may be allocated again.
The channel release procedure requires some more tweaking, some part
was started in the zecke/28c3 branch and needs to be tested/integrated
with the goal of having one common release path.
In case of a failed channel we still want the channel to not be
re-allocated right away but keep it closed/unused for (T3109 + T311).
rsl_rx_rf_chan_rel_ack has a check to not set the channel to S_NONE in
case the channel is in the error state. Add the camp Harald added a timer
to set the channel back to the none state in case the RF Channel Release
is not acked.
This reverts commit fc462dd59e.
show lchan should be capable of showing all allocated lchans,
all of a given bts, a given trx, a given ts. This feature was
broken when I added the ability to show a more simple summary.
Restore the initial behavior by splitting out the for loops
for the bts/trx/ts and check if we have parsed all parameters
and then call and return the subroutine.
Match IMSI and destination address against a set of entries, if it
is matching the header will be modified and no sender report will be
requested. Change the test case to request the sender report and then
verify that this bit is reset to 0.
GSM 04.64 8.4.2 asks to ignore UI frames if the DLCI is not known,
or if the "(V(UR)- 32) <= N(U) < V(UR)". E.g. if we want to have
V(UR) == 511 and this frame is dropped, we would ignore N(U)'s
0 to 510. Calculate the delta.
The code is based on Jonathan Santos's "LLC UI window" fix but the
issue was discovered independly.
The osmo-nitb application sometimes crashes because the BSC API
is doing an assignment underneath which is not handled by the code,
add dumy handlers to not crash, the right thing to do is to change
MNCC to have an assignment that can succeed/fail.
The keyword to look for is MNCC_LCHAN_MODIFY and mncc_sock should
wait for an ack/nack but right now the call just continues.
The UTC offset from the operating system will be used by default to
calculate the NITZ in MM INFO. However, a "timezone" vty command is
added at the BTS level, allowing BTS-specific overrides, e.g. in case
BTSs are distributed accross multiple timezones.
The BSS-side of BSSGP requires quite a number of additional functions
for sending unidirectional messages that a SGSN never sends.
This is a first step into completing the BSSGP implementation and making
it ready to be used from osmo-bts and other BTS-side GPRS
implementations.
Send a hello packet down to the client with the version number
of the MNCC interface. The hello structure might be extended to
include the endianes, size of each structure, etc.
In this iteration I just want to make sure that each VTY command has
online help. Replace "a b" with "a-b" if there is no "a c" with b!=c.
This config should gain some more sanity and consistency, this will
happen in another iteration.
Also make sure to specify seconds in the 'seconds' field. Doing
otherwise is an abuse that non longer works with the new timer infra.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
do_reset was not initialized anywhere anymore, so the reset was never
triggered. It's now fixed and we add an option to skip it in the
config so that when in production, you can restart without config
changes quickly.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In case a MS (of which we have no MM context) sends us anything but a
GMM ATTACH REQUEST, we need to send it a LLC XID RESET (by means of
issuing LLGMM-RESET.req). Otherwise the phone will expect us to send a
specific unacknowledged sequence number that we don't know.
Thanks to Holger for pointing this bug out to me.
It seems to commonly occur when a MS is doing network re-selection and
(erroneously) sends a RA UPD REQ instead of an ATTACH REQ. The RA UPD
REJ that we sent was never seen by the GMM entity in the MS, as the LLC
entity discarded it due to sequence number mis-match.
Using LLGMM-RESET.req, the GMM can request the LLC of the MS to reset
all its parameters, particularly the sequence numbers. We don't yet do
XID RESET retransmissions, and we don't yet generate a LLGMM-RESET.conf
primitive back to GMM.
Ubuntu 11.10 has changed some linker/compiler flags. Some fixes for this
can be seen here[1]. In general the to be linked libs need to be moved into
the LDADD section of parameters. This is with the old BFD linker (not gold).
This is likely to end in some ping-pong with other versions of the linker.
[1] https://bugs.launchpad.net/ubuntu/+source/nis/+bug/771034
Errors:
/usr/bin/ld.bfd.real: bsc_hack.o: undefined reference to symbol 'osmo_init_ignore_signals'
/usr/bin/ld.bfd.real: note: 'osmo_init_ignore_signals' is defined in DSO /home/ich/install/openbsc/lib/libosmocore.so so try adding it to the linker command line
/home/ich/install/openbsc/lib/libosmocore.so: could not read symbols: Invalid operation
...
../../src/libbsc/libbsc.a(rest_octets.o):/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:381: more undefined references to `bitvec_set_bit' follow
../../src/libbsc/libbsc.a(rest_octets.o): In function `rest_octets_si13':
/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:382: undefined reference to `bitvec_set_uint'
/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:383: undefined reference to `bitvec_set_uint'
/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:385: undefined reference to `bitvec_set_bit'
/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:402: undefined reference to `bitvec_set_bit'
/home/ich/source/gsm/openbsc/openbsc/src/libbsc/rest_octets.c:403: undefined reference to `bitvec_set_uint'
gprs_gmm.c:240:2: warning: passing argument 4 of ‘gprs_llc_tx_ui’ discards qualifiers from pointer target type
../../include/openbsc/gprs_llc.h:151:5: note: expected ‘void *’ but argument is of type ‘const struct sgsn_mm_ctx *’
gprs_gmm.c:349:11: warning: unused variable ‘ptsig’
gprs_gmm.c:601:5: warning: too many arguments for format
gprs_gmm.c:987:25: warning: initialization discards qualifiers from pointer target type
gprs_gmm.c:1010:6: warning: ‘rc’ may be used uninitialized in this function
When the BTS reboots it might not want to accept our BTS Attr,
do not leave the bsc_msc_ip/bsc_nitb but simply drop the BTS
connection.
Manually cherry-picked from: 54e6c8b3400b376ed36fe84f28f7930d2d9ff24b
The libosmo-abis merge broke Ericsson RBS support, as it didn't get the
part right where the per-TRX OML sign_link is determined while
transmitting OM2000 messages.
As a result of this fix, we can remove the 'to_trx_oml' parameter to
_abis_nm_sendmsg(), which is a nice cleanup.
Harald Welte
Holger Hans Peter Freyther
Alexander Huemer
Sylvain Munaut