* Don't copy features for osmo-bts and nanobts initially, wait until
BTS reported its features
* Checks for BTS features in VTY cmds: pass if features are not known
(not yet reported by the BTS), fail if the feature is missing
* Once BTS reports its features, check relevant VTY config parts again
Related: SYS#5922, OS#5538
Change-Id: I7fca42a39a4bc98a6ea8b9cfab28c4bad3a6a0aa
Add chan_counts_for_trx() and chan_counts_for_bts(). Drop
bts_count_free_ts() and trx_count_free_ts().
Rationale:
The bts_count_free_ts() and trx_count_free_ts() always returned the
number of free lchans, not timeslots. Hence, passing the pchan type as
argument never really matched the semantics.
Especially, when looking for free SDCCH, there is no clear match on a
gsm_phys_chan_config enum value: SDCCH8_SACCH8C, CCCH_SDCCH4,
CCCH_SDCCH4_CBCH, SDCCH8_SACCH8C_CBCH? -- GSM_LCHAN_SDCCH is clear.
==> Rather count free lchans by enum gsm_chan_t.
Counting lchans of distinct types required separate iterations for each
lchan type.
==> Rather compose an array of counts for all types, in one go.
I need to count the amount of free SDCCH lchans in an upcoming patch to
implement the performance indicator allAvailableAllocatedSDCCH (cumulate
time for which no SDCCH are available).
To implement allAvailableAllocated{SDCCH,TCH}, I need a count of both
the used as well as the total lchans for a type: it does not make sense
to flag "all available allocated" if none are ever available.
To properly count dynamic ts, I need the maximum total that can be
possible at any time. And to count currently free lchans, I need the
current total. This may seem counter intuitive, but consider, e.g.:
- Obviously, if a cell has only static TCH/F timeslots, it does not make
sense to flag that all available TCH/H are occupied, because no TCH/H
are available ever. Just stating this as contrast to dyn TS.
- If a cell has OSMO_DYN timeslots, I *do* want to flag that all TCH/H
are occupied when all dyn timeslots are fully occupied.
- If those OSMO_DYN however are all used as TCH/F, the current total of
TCH/H becomes zero, and it seems like TCH/H should not be considered.
- To count the nr of currently free lchans, I need the currently
possible total of lchans and the nr of occupied lchans.
So return both a maximum total and a current total of lchans. In above
example, the maximum total shows that there would be TCH/H possible.
BTW, it would be nice to keep a chan_counts array on trx, bts and bsc
level and update as channels are allocated and released, instead of
counting them all over periodically. But it's less error prone this way.
Related: SYS#4878
Change-Id: I2fb48c549186db812b1e9d6b735a92e80f27b8d3
If an RF Resource Indication message includes interference band(s)
for 'pure' PDCH (i.e. not dynamic) timeslot(s), osmo-bsc logs:
DRSL DEBUG abis_rsl.c:1515 (bts=0,trx=0) Rx Resource Indication
DRSL ERROR bts_trx.c:236 (bts=0,trx=0) chan_nr 0xc7 cbits 0x18:
(bts=0,trx=0,ts=7,pchan=PDCH,state=UNUSED) is not GSM_PCHAN_OSMO_DYN
DRSL ERROR abis_rsl.c:141 (bts=0,trx=0,ts=7,pchan=PDCH,state=UNUSED)
Abis RSL Rx Resource Indication: mismatching chan_nr=0xc7
Let's better check if a timeslot is capable of GSM_PCHAN_PDCH,
rather than checking if it's GSM_PCHAN_OSMO_DYN.
Change-Id: I2cac4acd4c5145c5c525c9952fdc754477ce0942
Related: SYS#5313
osmo_fsm_inst_free() must be called explicitly, otherwise the instance
is kept in the llist of instances and produces heap-use-after-free.
Note: This fix is required by follow-up patches where some stubs are removed
and hence some tests start using FSMs internally. Due to this bug, tests
will crash due to reason explain in previous paragraph.
This patch itself may introduced failures to build due to some new
interdependencies being introduced in same follow-up patches mentioned
above, which are in turn fixed by this present patch.
So they are expected to be merged together.
Change-Id: Ib0e5560efe518833f76f846d7269e82d85c186a1
Looking for a bug, I spread this logging to understand what was
happening. Might as well keep it.
Related: SYS#5559
Change-Id: I46b660cd51a41e561712a0bd849ce0ee8d1a9588
They will gain support to be activated as SDCCH/8 soon too.
Related: OS#5309
Depends: libosmocore.git I56dcfe4d17899630b17f80145c3ced72f1e91e68
Change-Id: Id5b89fe589a52ff88486435ac43809edb4b80f98
'vamos' is only set to true for osmobts types, hence no need to check
that condition again.
fixup for commit d37dcb9f68
'RSL: rx and tx VAMOS Channel Number cbits for VAMOS lchans'
I957eff0d2c33ec795eda75a4bff21965b0179f73
Related: CID#236318
Related: SYS#5315 OS#4940
Change-Id: I4d9afc2996d95fdc15ee1a04e31d781b595023e3
The RSL_CHAN_OSMO_VAMOS_MASK mask applies to the chan_nr,
but the cbits variable in rsl_lchan_lookup() is chan_nr >> 3.
So the mask didn't do its job. Now it does.
A bit embarrassing how i took the suggestion to use this mask and put it
into code without testing it. It looked good enough...
Change-Id: I005c5f319bb6f14651aeb613cdff52e79f761913
Add the Osmocom-specific extension to indicate VAMOS shadow lchans in
RSL, in lchan lookup and RSL message transmission.
Note that RR messages containing cbits (Assignment Command, Handover
Command, ...) must *not* send Osmocom specific cbits to the MS. Only the
RSL messages directed to the BTS send Osmocom specific bits.
Related: SYS#5315 OS#4940
Depends: If33c1695922d110c0d2c60d5c0136caf2587194e (libosmocore)
Change-Id: I957eff0d2c33ec795eda75a4bff21965b0179f73
There is some odd repetition of macros with all possible subslot
indexes, but now we are using the defined macros instead of magic
numbers, making it easier to see that it is correct.
Also this allows trivially adding VAMOS cbits cases to the existing
switch() in a subsequent patch.
Change-Id: I4c6ce2f4ca999c19a58909b9adb849a3b8b6ffc8
Change gsm_lchan_name_compute() to a function that in-place updates the
lchan->name. That allows calling it numerous times with the talloc
handled internally. Rename it to lchan_update_name().
Add 'shadow' to lchan_update_name() and lchan_fsm_update_id() for VAMOS
shadow lchans, and also print the lchan index that it is a shadow for,
instead of the index in the lchan array.
When set_pchan_is() updates the VAMOSness of the lchans, call
lchan_fsm_update_id(). From lchan_fsm_update_id() also call
lchan_update_name().
This is a bit convoluted for legacy reasons. There are utility programs
and C tests using bts_trx.c but not lchan_fsm.c. lchan_update_name()
lives in gsm_data.c for that reason. This patch calls
lchan_update_name() from lchan_fsm_update_id() and not vice versa to
avoid having to add stubbed lchan_fsm_update_id() functions to all
utility programs and C tests.
We can't easily unify the lchan->name and lchan->fi->id without lots of
refactoring rippling through all those little utility programs and C
tests.
Change-Id: I7c2bae3b895a91f1b99b4147ecc0e3009cb7439a
So far we have a couple of macros iterating a specific number of lchans,
depending on dynamic timeslot state etc. With addition of VAMOS lchans,
this would become more complex and bloated.
Instead of separate iteration macros for each situation, only have one
that takes a number of lchans as argument. That allows to more clearly
pick the number of lchans, especially for non-trivial VAMOS scenarios.
Related: SYS#5315 OS#4940
Change-Id: Ib2c6baf73a81ba371143ba5adc912aef6f79238d
Use a talloc ctx directly without an intermediate static buffer.
A subsequent patch will add a name tweak for VAMOS secondary lchans, so
it felt appropriate to first clean this.
Change-Id: Idb922605c15242a2cdc7c34668c845a179a15660
This patch caused major breakage in my setup, with BSC printing at
startup: "(bts=0,trx=0) Failed to generate System Information".
And bts-trx printing all the time:
"sysinfo.c:162 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES
value as SI3 is not available yet, fallback to 1"
This reverts commit c1a5310a3e.
Change-Id: I5da365c93aedc6668a77b82ee9b68cbec64967e3
The effects of the neighbor configuration depend on the LAC, Cell
Identity, ARFCN, BSIC configuration of neighbor cells. Make sure that
the neighbor ARFCN list in the System Information is updated.
This may seem rather aggressive: updating the SI of all BTS if only one
config item changed. But indeed even modifying one config item of one
BTS may cause a change in the neighbor relations that many other BTS may
have to the changed BTS. For example, if many BTS configure a
'neighbor lac-ci 42 23', and this cell's config changes to LAC 43, all
of those other BTS need to update their neighbor ARFCNs.
Also update the system information even before the BTS are connected and
started up. The main benefit here is that the VTY 'show bts N' command
then already lists the correct neighbor ARFCNs.
In gsm_bts_trx_set_system_infos(), make sure that the updated SI is only
sent to TRXes that are actually usable, otherwise abis_rsl_sendmsg()
spams the log with complaints that a message's dst == NULL. Still return
an error rc in case a TRX is not connected, so that the CTRL command
bts.N.send-new-system-informations accurately returns whether SI were
actually sent to all TRXes.
The desire to have the ARFCNs listed in the VTY before starting up BTSes
came during analysis for Ifb54d9a91e9bca032c721f12c873c6216733e7b1,
which fixes a bug that is now much easier to verify being fixed.
Change-Id: I2222e029fc225152e124ed1e8887f1ffd4a107ef
This allows a given BTS model driver to initialize data structures
specific cor this BTS instance (or a TRX for this BTS instance).
Change-Id: Icbad9cdc12221c9ad997267d77e5414edcbac538
Before they were set with a value of 0, which had no related enum field,
but since in general all comparsions are done against NM_STATE_UNLOCKED
they also hold valid.
The major change in behavior with this patch is upon OML link down,
where gsm_bts_mo_reset() is called on all objects. This way, upon OML
re-establishment we have again all objects as Locked again, which is the
expected default value as per TS 12.21.
Change-Id: I68ae0bc51a565f903b47cf72f3e3dd6f1a2d2651
Oliver Smith
Vadim Yanitskiy
Neels Hofmeyr
Pau Espin
Neels Hofmeyr
Harald Welte