* Release all channels with SAPI > 0 with the "local end release"
(as of NOTE 1 of GSM 04.08).
* No need to wait for all SAPIs to be torn down and the normal
REL_IND/REL_CONF will call rsl_handle_release and the channel
should be released.
* Update the documentation
Put the idiom that sets the lchan state to none and respecting the
error state into a shared method. This way the special handling for
the abnormal case is just in one place.
Avoid printing error messages when paging while the BTS is down. In
case a BTS is going down it is best to just let the timers expire
normally. We can not expire them right away as multiple BTS could be
paged and we do not want to interfere with that. There is no need to
stop the queue right now.
The previous code didn't work as expected. The trx and dst pointer
are located in an union and in the case of the Abis code the dst
is used to point to the signalling link timeslot and not the TRX.
The is_ipaccess_bts always returned false because the dst was casted
to a trx while it was no trx.
This fix was tested with the nack_test/NACKTest.st of the test repo.
I saw the old copy of the "Appendix J" code too late and I have
discovered some quirks and I am more familar with my implementation.
Most noticable 'w' only needs to be as big as the input arfcn but
requires the 'w' to be initialized. The power_of_2 implementation
differs as well (mine matches the output of wirehsark).
The f0 could be chosen in a better way but right now picking
the lower bound is the easiest. It is not clear if to use
modulo if the range is chosen in the middle. This can be improved
in the future. Right now I have no bit fiddling for range128, 256
and 1024 as I was running out of time.
alpha=0 (the new value) doesn't reduce MS transmission power during GPRS
as much as we did with alpha=10. This is to optimize for coverage and
to keep GPRS working at all cost, and not care about MS battery life
time or uplink interference in surrounding cells.
FIXME: This should be made configurable via the VTY and the normal
default (unless configured otherwise by vty/config file) should be '6'.
In order to keep mobile at PACCH as long as possible the timer T3192 is
set to 1500ms. This reduces the probablity of long lasting assignment
process on CCCH for subsequent downlink TBFs.
The first fields are still the location up to the height.
The next field is "operational" if any of the trx are operational,
otherwise "inoperational"
The second to last field contains "locked" if all of the trx are in the
admin state, otherwise "unlocked".
The last field represents the rf policy currently in effect. It is one
of (on|off|grace|unknown).
<tstamp>,<valid>,<lat>,<lon>,<height>,<oper>,<admin>,<policy>
bts_hsl_femtocell.c: In function ‘hsl_sign_link_up’:
bts_hsl_femtocell.c:206:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘uint64_t’ [-Wformat]
bts_hsl_femtocell.c:210:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘uint64_t’ [-Wformat]
abis_nm.c: In function ‘abis_nm_get_attr’:
abis_nm.c:1380:11: warning: unused variable ‘cur’ [-Wunused-variable]
abis_nm.c: In function ‘ipac_parse_bcch_info’:
abis_nm.c:2588:11: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c:1310:6: warning: variable ‘constructed’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c: At top level:
bts_nokia_site.c:1364:12: warning: ‘dump_elements’ defined but not used [-Wunused-function]
gsm_04_08.c: In function ‘mm_rx_loc_upd_req’:
gsm_04_08.c:521:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
osmo_msc.c: In function ‘msc_ciph_m_compl’:
osmo_msc.c:122:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hslfemto_bootstrap_om’:
bts_hsl_femtocell.c:101:11: warning: variable ‘cur’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hsl_drop_oml’:
bts_hsl_femtocell.c:232:21: warning: variable ‘line’ set but not used [-Wunused-but-set-variable]
handover_logic.c: In function ‘ho_chan_activ_ack’:
handover_logic.c:197:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
We now have a lchan->csd_mode member that determines if RSL should
activate the channel in CSD transparent services or not. The previous
code always assumed CSD is non-transparent.
(This requires libosmocore >= eed26116c96f03c6128fac3dead9054714af6cab)
Some nodes below 'config' didn't have ournode_exit / ournode_end,
and thus were not able to properly perform this function. exit should
always only go back one level, while end drops us back to ENABLE_NODE.
The prompt now represents the nesting level, and there's one consistent
space after the final prompt character (typically #).
This effectively limits the number of BTSs to 256, but I think that's
acceptable for now. Unfortuantely there's no decent way to dynamically
update the valid number range depending on how many BTSs are actually
configured in the system :/
While generally we should log troly unknown RR messages, we can simply
pass along RRLP messages (which aren't unknown!)
In real networks, the RRLP would probably not end up at the MSC, but
well, sometimes we don't care what real/classic networks do.
We are currently not checking if the BTS actually suports that cipher,
and we particularly don't have any hack for ip.access which apparently
seems to re-use the RSL algorithm identifier for A5/2.
so far, osmo-bts/sysmobts used to be entered as "sysmobts" type in the
configuration file. However, there are some differences in the
protocol/behaviour and we should reflect that by a new BTS plugin (with
lots of code reuse from the nanobts driver).
Holger Hans Peter Freyther
Harald Welte