Add ho_dtap_cache to gsm_subscriber_connection, a stock msgb queue to be used
with msgb_enqueue() and msgb_dequeue().
Keep a counter of queue length, to enforce a sane maximum counter for cached
messages. So far a hardcoded maximum of 23 messages will be cached.
Have balanced ho_dtap_cache_add() and ho_dtap_cache_flush() functions.
The original patch was by jolly, but I have basically completely replaced it
with the simpler msgb queue pattern.
Change-Id: I6e4d93628befb3d97e5cee0343cd9f8ba0b8620c
If we want to average over up to 10 measurement reports (as configurable
at VTY), we need a history of at least 10 measurements.
Change-Id: Ia7cfac073bdc464092ca3e51dec319ac30401dd1
It is desirable to allow configuring handover for each individual network cell.
At the same time, it is desirable to set global defaults.
Treat the 'network' node handover parameters as global defaults, add another
set of parameters for each individual BTS.
This raises questions on how the 'network' node should affect the individual
BTS. The simplistic solution would have been: on creating a BTS in the config,
just copy the current defaults; with serious drawbacks:
- tweaking any parameter in the telnet VTY on network node will never affect
any running BTS.
- network node defaults *must* be issued before the bts sections in the config
file.
- when writing a config back to file, we would copy all net node defaults to
each BTS node, making the network node configs pointless.
Instead, add a handover_cfg API that tracks whether a given node has a value
set or not. A bts node ho_cfg gets a pointer to the network node config and
returns those values if locally unset. If no value is set on any node, use the
"factory" defaults, which are hardcoded in the API. Only write back exactly
those config items that were actually issued in a config file / on the telnet
VTY. (ho_cfg API wise, we could trivially add another ho_cfg level per TRX if
we so desire in the future.)
Implement ho parameters as an opaque config struct with getters and setters to
ensure the tracking is always heeded. Opaqueness dictates allocating instead of
direct embedding in gsm_network and gsm_bts structs, ctx is gsm_net / bts.
This is 100% backwards compatible to
old configs.
- No VTY command syntax changes (only the online help).
- If a 'bts' sets nothing, it will use the 'network' defaults.
- The 'show network' output only changes in presence of individual BTS configs.
On 'show network', say "Handover: On|Off" as before, iff all BTS reflect
identical behavior. Otherwise, output BTS counts of handover being enabled or
not.
Use the same set of VTY commands (same VTY cmd syntax as before) on network and
BTS nodes, i.e. don't duplicate VTY code. From the current vty->node, figure
out which ho_cfg to modify.
For linking, add handover_cfg.c (the value API) in libcommon, while the
handover_vty.c is in libbsc. This is mainly because some utility programs use
gsm_network and hence suck in the ho stuff, but don't need the VTY commands.
Review the VTY online help strings.
Add VTY transcript test for handover options, testing config propagation from
network to bts nodes, 'show network' output and VTY online help strings.
(Needs recent addition of '... !' wildcard to osmo_interact_common.py.)
I considered leaving parts of this more readable, but in the end decided for
heavy use of macros to define and declare the API, because more values will be
added in upcoming patches and I want to prevent myself from messing them up.
Inspired-by: jolly/new_handover branch, which moves the config to 'bts' level
Depends: I7c1ebb2e7f059047903a53de26a0ec1ce7fa9b98 (osmo-python-tests)
Change-Id: I79d35f6d3c0fbee67904378ad7f216df34fde79a
The stow-enabled jenkins builds are currently failing like below:
make[3]: Entering directory '/build/src/libcommon'
CC bsc_version.o
CC common_vty.o
CC debug.o
CC gsm_data.o
In file included from debug.c:34:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from common_vty.c:27:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from gsm_data.c:37:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
Let's make sure the common gsm_data.h have all required CFLAGS to compile.
Change-Id: I30b75db6ffba227b05b5413b84b15f69e0c213f2
T3109 is started when the BSS sends a RR CHAN REL to the MS and stops
downlink SACCH generation. Stopped when the MS successfully releases the
LAPDm link. After stop or timeout, the radio channel is released using
RSL RF CHAN REL.
Recommended values in literature are 1-2s + RadioLinkTimeout*0.48s or
5s, while we had the absurdly high 19s timeout. This means we occupy
the radio channel way longer than needed in situations where the MS is
no longer able to properly release Layer2 (LAPDm DISC) due to loss of
signal or the like.
See also: https://osmocom.org/projects/osmobsc/wiki/Timers
Change-Id: I7416b4118e5b73c6ffb98e3546bc62a36c7a967a
Closes: OS#2734
This is a new inline function that hides all accesses to conn->bts.
A follow-up patch will then point this to conn->lchan->ts->trx->bts
to get rid of the bts field.
Change-Id: Ib6cf7097ced34eebe80441c29ab1534f21956a33
RRLP is handled in OsmoMSC after the split from NITB, so let's remove
any bogus VTY commands left over in the BSC.
Change-Id: Ib626f43a3a3ca69dfc127afe5832eb58f7fb6a38
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
Those NACKs shouldn't happen in production, and if they do, you probably
want to have a more persistent figure than a line in the log file about
it. Having counters allows the user to monitor this efficiently.
Change-Id: Ic82c6baaf4cb88d07bc5cdc200f8279cf130f396
Those NACKs (CRCX/MDCX/PDCH_ACT) shouldn't happen in production, and
if they do, you probably want to have a more persistent figure than
a line in the log file about it. Having counters allows the user
to monitor this efficiently.
Change-Id: I5edf979c9a2b4c9a5a60eef9f66c26da54f2bddf
Our T3113 timer default of 60s was set early in the development of
OpenBSC, where we didn't really know what values to use and used
excessively large/safe values. Paging the same MS for 60 seconds (even
if there's no paging response) will however create a lot of PCH load for
no good reason.
It seems there's no clear guidance as to what the value should be. Other
implementations use something in the order of 10 seconds (OpenBTS,
yateBTS), which seems more realistic. THe Siemens BS-11 has a default of
5 seconds.
Let's be conservative and go to 10s as a default, which is already 6
times less potential PCH usage than our default so far...
Closes: OS#2756
Change-Id: If9c8441939c6fdcf6e2b9ede8cc576eb86296209
Counting the number of T3113 expirations (one per subscriber per BTS)
vs the number of paging attempts (Bsc global) is a ueseless figure,
as you cannot relate each other.
We count on the BSC level:
* how many PAGING we received from the MSC (total)
* how many of those were for cells/LACs we don't serve
* how many of those resulted in PAGING RESPONSE
We count on the BTS leve:
* how many PAGING CMD we sent to the BTS (total)
* how many of those we ignored as we were already paging
* how many of those resulted in PAGING RESPONSE
* how many were expired due to T3113 expiring
Change-Id: I410bbcbb2621f95f11238f7a5da01ab438f5fee1
This timer is started when a channel is allocated with an IMMEDIATE
ASSIGNMENT message. It is stopped when the MS has correctly seized the
channel. Ever since the early days of development we were using a very
long timeout to be on the safe side. However, in production networks
this is a terrible waste of resources, as we will occupy 10s worth
of air-time on one of our channels for each RACH request we receive.
The only scenarios where you might need something absurdly high as 10s
would be if you have 8s of RTT between your BTS and the BSC.
See also https://osmocom.org/projects/osmobsc/wiki/Timers
Change-Id: If3c52a7cf0c06d074c44a2fc414679279189aab9
Closes: OS#2733
This is left over from the OsmoNITB days. We're defining and allocating
these MSC counters, but never actually using them. This also means that
the automatic counter export will list them, raising the expectation at
users that such counters could be used in OsmoBSC.
Let's remove them. They are in OsmoMSC, but not OsmoBSC.
Change-Id: I5bd9e6e333b1c396beae46630986b17e7f8b82ef
In more recent versions of libosmocore, we are converting any '.'
in [rate] counter names to ':' to avoid clashes with the special
meaning of '.' in the CTRL interface. Let's avoid any conversion
and use the proper name already here.
This also changes the codec_foo counters to codec:foo to follow the
notation of other counters.
Change-Id: I18916abbfc706b86bd211e7cca1a0ca3099826e9
We used to have a lot of counters only globlly per BSC, but they're
much more useful on a per-BTS level.
Change-Id: I954b9dda72b83b91d46a934c221a8b3375743599
Make it future compatible for changes. Otherwise it will break
when additional enums are adding to chreq in libosmocore.
Depends on libosmocore Id67ba8de89dd6288e449197438e9e1c5d7f5a134
Change-Id: I2acab2af8d67bccb2bc495512c1f259ae649a832
authentication (optional|required) is no longer needed, the
related decisions are now made in the HLR.
Change-Id: Ib6c6331cc86004c4862067031e4fcb12a6975b63
The following structs are no longer used/needed:
- gsm_auth_algo
- gsm_auth_info
- gsm_auth_tuple
- gsm_security_operation
Change-Id: I93873a6cb980a54e03e719170e27a7e397236b77
Authentication is no longer done in the BSC, the variables that
set the authentication policy and the IMSI regex have no longer
any effect.
Remove auth policy and authorized-regexp
Change-Id: Ie31b921b5fd0af5501ec0c77c0f08089c10075e2
It's leftover from the time when gsm_data_shared.* was actually shared
with OsmoBTS. Nowadays ROLE_BSC is always defined so we can just drop it
entirely and make working with gsm_data_shared.h slightly easier.
Change-Id: I34fc9ee5955c14bbbde68d5499cf2acfd329afbc
osmo-bsc currently negotiates the RTP stream directly with the
BTS and reports back the RTP IP/Port on the BTS. This works fine
for a single BTS, but for Handover the port/ip pointing to the
MSC side must not change, so an entity in between the BTSs and
the MSC is required.
Integrate the mgcp-client and use osmo-mgw to switch the RTP
streams.
Depends: osmo-mgw Ib5fcc72775bf72b489ff79ade36fb345d8d20736
Depends: osmo-mgw I44b338b09de45e1675cedf9737fa72dde72e979a
Depends: osmo-mgw I29c5e2fb972896faeb771ba040f015592487fcbe
Change-Id: Ia2882b7ca31a3219c676986e85045fa08a425d7a
To properly decide if a given OML link is degraded we have to use
BTS-specific information about MO state.
* move check function into BTS-specific part
* add generic wrapper
Related: OS#2486
Change-Id: Iddc7a4d20fbb95a6566eed1487a12733e5adb9e2
Expose OML link uptime available via vts's "sh bts 0" command with the
new "bts.0.oml-uptime" ctrl command. To avoid code duplication, move
uptime computation into separate function and use it for both.
Change-Id: Iec405aa949d6a38a9c8e64cd7ee4b49fd416835d
Related: OS#2486
OML link state is available via vty ("sh bts 0" command) and
ctrl ("oml-connection-state" RO variable).
When showing OML link state, take into consideration RSL link state as
well: if OML is up but RSL is missing show it as degraded.
That's implemented via BTS model-specific functions (currently Sysmo- and
Nano- BTS only)
Change-Id: I5952fc59e4d82e0aa627ad91d20f964d9559a4c4
Related: OS#2486
This is a BSC, it has norelation to RANAP or Iu(h). Let's remove
an references to it, and also the build dependency to libosmo-ranap-dev
Change-Id: I517b9f69309b2ed0540dd6c186b3d4a2a03aed44
* log administrative state transitions
* log what's caused it
* while at it, mark boolean variable as such
Change-Id: I3e25a19fac4d0b4886d825c9876771b1f66efe58
Related: SYS#3864
After osmo-mgw change I8e0b2d2a399b77086a36606f5e427271c6242df1, there now is a
separated libosmo-mgcp-client, and osmo-bsc needs adjusting.
But besides having an unused struct in gsm_network, osmo-bsc does not yet use
its MGCP client; these are merely plans for the future. Until we do, let's just
drop the dependency entirely.
Change-Id: I6402c7cbe58dacae7630f7f03819f8102e54c699
Andreas Eversberg
Harald Welte
Philipp Maier