During the peer review session with Holger, these things were deemed fixable.
No need to have a static gtp_packet_desc in gtphub_handle_buf.
No need to memcpy, direct assignment does the job.
Remove obsolete comments.
Fix a stray space.
Sponsored-by: On-Waves ehi
If a GSN indicates that it has reset, tear down each known tunnel for that GSN
individually (don't send the GSNs on the other side a different restart
counter, because they represent more than just this GSN).
Sponsored-by: On-Waves ehi
During resolution of the header TEI, also return the tunnel struct that
resolved the TEI, so the Delete PDP Ctx code does not need to look it up
again.
Upon Delete PDP Ctx Request, remember the IEs and that a request was made.
Upon Delete PDP Ctx Response, find the pending delete and remove the
corresponding tunnel, iff the response indicates success.
Add a context deletion to regression tests, rename the test appropriately.
Sponsored-by: On-Waves ehi
gsn_addr_from_str(): return error upon NULL string.
Add some debug logging.
With an empty config, no bind addresses were set, and the address parser
did not check for a NULL pointer, resulting in a segfault.
Sponsored-by: On-Waves ehi
This is a mostly cosmetic change. Instead of separate buffer handling
functions, reduce some code duplication by using a side_idx just like the
plane_idx, with arrays.
Sponsored-by: On-Waves ehi
This could be done way better, discussion is pending/ongoing. It is indeed
quite unlikely that any user will ever hit this situation, so there is no
strong drive to invest effort in a more comprehensive implementation.
Sponsored-by: On-Waves ehi
There's no need to keep two separate number pools when both can be fed
from the same pool. User and Ctrl plane TEIs can technically overlap without
colliding, but it doesn't hurt if they don't overlap, either.
Sponsored-by: On-Waves ehi
Force passing a restart counter, by adding such arg to gtphub_start() (test
suite is not affected by this).
In gtphub_main.c, add -r,--restart-file <path> and next_restart_count() to
maintain the counter file. While at it, tweak the cmdline help to unify the
formatting (mostly commas and a missing line break).
Send gtphub's own restart counter. So far, the sender's restart counter was
copied through, which would break as soon as more than one GSN would talk to
the same peer with differing restart counters.
Also fix the in-mem restart counter data type (one octet, not two).
Sponsored-by: On-Waves ehi
So far, gtphub worked perfectly by only tracking single TEIs ... for probably
most uses. But a Ctrl plane tunnel may have expired despite a still active
corresponding User plane tunnel. The User plane would continue to work
indefinitely, but if any Ctrl messages followed after more than six hours of
Ctrl silence, they would have been dropped due to an expired TEI mapping.
We want to
- combine expiry of a user TEI with its ctrl TEI. (done in this patch)
- upon delete PDP context, remove both user and ctrl TEI mappings. (future)
- when a peer indicates a restart counter bump, invalidate its tunnels.
(future)
To facilitate these, track tunnels, complete with both SGSN's and GGSN's
address, original and replaced TEIs, all for both user and ctrl plane, in a
single struct. A single expiry entry handles the entire tunnel, instead of
previously four separate expiries for each endpoint identifier.
Add the concept of a "side", being either GGSN or SGSN, to index tunnel
endpoint structs, and so on.
Track the originating side in the gtp_packet_desc.
Add header_tei_rx: set_tei() overwrites header_tei, but the originally received
header TEI is still needed to match a Create PDP Context Response up with its
Request (and for logging).
Adjust the test suite to expect tunnel listing strings instead of TEI mappings,
with a bonus of making it a lot easier to grok, and including the IP addresses.
Add regression test for refreshing tunnel expiry upon use.
Note: the current implementation is as slow as can possibly be, iterating all
the tunnels all the time. Optimizations are kept for a future commit, on
purpose.
BTW, the sequence number mapping/unmapping structures remain unchanged.
Sponsored-by: On-Waves ehi
The expiry queues are already used for resolved GGSN addresses, and will
soon enlist tunnel structs. Hence the naming should be more general.
Sponsored-by: On-Waves ehi
Make 100% sure the user adds expiring_items in chronological order by asserting
that a newly added expiry is >= the last expiry in the queue. Add llist_last()
to facilitate.
Sponsored-by: On-Waves ehi
Instead of passing the current time around in function arguments ('now'),
rather store the current time once upon decoding a GTP packet in the
gtp_packet_desc passed around anyway ('p->timestamp').
Sponsored-by: On-Waves ehi
Some gtphub_bind pointers point to an array of binds, some point directly at
instances. Make the distinction between the two more obvious by adding an
'_arr' suffix to the array ones.
Partly in preparation for upcoming rate counters.
Sponsored-by: On-Waves ehi
Clean up functionality is added for the test suite only, to be able to clean
out all allocations and test against memory leaks.
So far, it was sufficient to expire everything to free a gtphub. In preparation
for the upcoming rate counters, which will need to be freed explicitly, add
gtphub functions to clean up everything.
As added bonus, also close the sockets explicitly -- not really needed upon
program exit, neither by the test suite, but *if* we have a cleanup function,
it should clean up everything properly.
Closing the sockets is however kept separate, for the test suite.
gtphub_start() and gtphub_stop() are for normal use (published in gtphub.h),
and gtphub_init() and gtphub_free() are for the test suite, without sockets.
(gtphub_stop() will probably never be called by anyone, but its existence
completes the picture.)
In gtphub_test.c, have a function to clean up the testing gtphub struct. First,
expire everything by timeout, assert emptiness, then call the cleanup function.
Call from each test in the end.
Sponsored-by: On-Waves ehi
Upon calling gtphub_peer_del(), all addresses and ports should already have
expired (by force). Make sure the code heeds that with a so far missing
assertion.
Sponsored-by: On-Waves ehi
From sgsn_vty.c, copy the cfg_grx_ggsn_cmd to add an ares server to the static
sgsn_instance.
This is sort of preliminary. As described in comments, the sgsn_ares functions
should actually be separated from the static sgsn structure. gtphub keeps such
an sgsn structure just for the sgsn_ares functions.
Sponsored-by: On-Waves ehi
gtphub_ext.c's initial purpose was to wrap a specific function. The file
then turned into everything related to DNS, which fits pretty well. Rename
to gtphub_ares.c.
Tweak the header comment to reflect the new file name.
Sponsored-by: On-Waves ehi
Implement min/max bounds for nr_pool, adjust nr_pool_init() and current tests,
and create unit tests for nr_map wrapping.
Sequence numbers range from 0 to 65535, while TEIs range from 1 to 0xffffffff.
Both cause problems when the nr_pool surpasses the range: seq exit their valid
range, causing unmappings to fail, and a TEI would be mapped as zero (invalid).
Add a comment about TEI wrapping, and lose the comment about random TEIs (not
really important).
Sponsored-by: On-Waves ehi
Use unsigned int for nr_map, just large enough to fit the TEI space.
Adjust log output formats and casts accordingly.
Fixes: TEIs are uint32_t, but the nr_map so far used int. This would cause TEIs
from 0x80000000 on to be handled and printed as a negative value.
Sponsored-by: On-Waves ehi
The del_cb is now also used for ares (GGSN resolution) timeouts, and expiry is
anyway separated from nr_map, so this comment is void.
Sponsored-by: On-Waves ehi
This fixes a bug in the following circumstances:
* BSIC is set to 0 in the config file
* No TSC is explicitly specified at the BST level in the config file
In this case, we ended up using BSIC=0 and TSC=7, as TSC=7 is our
default initialization value.
The TSC of the CCCH/BCCH must always be the BCC, which is the lower 3
bits of the BSIC. Having configuration options for both the BSIC _and_
the TSC at the BTS level therefore makes no sense, as it only adds ways
in which users can configure non-oprational configurations. So we
remove the bts->tsc member, and keep only the ts->tsc members that allow
us to configure a timeslot-specific TSC that's different from the BTS
TSC (= BCC).
s_db.c: In function ‘_insert_ud’:
meas_db.c:65:6: warning: implicit declaration of function ‘rxlev2dbm’ [-Wimplicit-function-declaration]
rxlev2dbm(ud->full.rx_lev)));
^
- an unnecessary if-not-NULL check (1339764);
- a missing nul termination safety net (1339768);
- a typo resulting in the wrong proxy being logged (1339767).
Sponsored-by: On-Waves ehi
gtphub always wants to know the sender, hence make the from_addr pointer
mandatory.
Fixes two coverity complaints (1339766, 1339764).
Sponsored-by: On-Waves ehi
Fit most of the code in 80 chars width. Some instances still leak past 80
characters because of long function names, inline comments or the like, "the
exception proves the rule."
Sponsored-by: On-Waves ehi
For maintenance, it is convenient to have the log level explicit at each
log statement.
Tweak some log levels / message formatting while at it.
Sponsored-by: On-Waves ehi
Allow logging the plane (Ctrl/User) and side (SGSN/GGSN) in functions that only
have a gtphub_bind* to work with, by adding a constant label to each bind.
Sponsored-by: On-Waves ehi
If a GGSN is already known from unmapping, don't invoke a host resolution.
In a live working environment, it wouldn't hurt, because the lookups would
mostly return from the cache. But in a testing environment without a name
server, it barfs on every packet.
Sponsored-by: On-Waves ehi
Initialize llist_heads to empty (2 were missing). Move those for struct gtphub
instances to gtphub_zero() (one moved, one added).
In from_[gs]gsns_read_cb(), use a return type that can actually reflect
negative return values.
resolved_addr.buf: no need to take the address of a byte array var
(cosmetic).
Pass the proper user data address to sgsn_ares_query(), not the address of
the pointer holding the user data address.
Initialize ggsn_lookup->expiry_entry (was missing). Publish the function for that
in gtphub.h so gtphub_ext.c can use it.
Sponsored-by: On-Waves ehi
Looking for a segfault, I added a lot of logging. This may be useful for
live testing ares, leaving it in there for now.
Note: I still want to clean up the logging concerning log levels etc. once
we're out of alpha.
Sponsored-by: On-Waves ehi
Allow a peer sending from an unknown port but a known address, and just
create the port (and unmap the seq nr back to this port later to return
the response to the sender).
Only an SGSN on the Ctrl plane is allowed to make the very first contact
from an unknown address.
Sponsored-by: On-Waves ehi
Split decoding return code GTP_RC_PDU in GTP_RC_PDU_C and GTP_RC_PDU_U.
Don't do IEs in GTP_RC_PDU_U.
Add a unit test for User plane data, expected to fail (nonstandard port case).
In gtphub_test.c, tweak logging so that it is easily visible which test
produced which output. Also add the global resolved_sgsn_addr and ggsn_sender,
symmetrically to resolved_ggsn_add and sgsn_sender.
Sponsored-by: On-Waves ehi
Generalize to make the PDP ctx message definitions and "sending" of messages
from SGSN->gtphub->GGSN and back reusable in future tests.
Publish gsn_addr_from_sockaddr() in gtphub.h for use in gtphub_test.c.
Use an osmo_sockaddr for resolved_ggsn_addr, because one is needed for
comparison in probably every future test.
Add LVL2_ASSERT() to print assertion message and return instead of abort,
so that functions can be called from several tests without losing the
info of which test caused it from which line.
Use globals for struct gtphub and time_t now, to reduce nr of args that need to
be passed around when writing tests. Add a default test setup function.
Sponsored-by: On-Waves ehi
Up to now I used the Echo as a test for sequence nr mappings. But Echos
should be handled differently: they are scoped on the link and an Echo
response should be sent right back to the requester.
Sponsored-by: On-Waves ehi
For the resolving function, change the function signature to return a
gtphub_peer_port. In consequence, publish two functions concerned with
gtphub_peer_port instances for use in test and gtphub_ext.c.
Add GGSN resolution queue, callback and cache. Simple implementation: if an
SGSN asks for a GGSN, it will first get no answer, and I hope it will ask again
once the GGSN is in the cache.
Within gtphub_ext.c, have a dummy sgsn struct, as the sgsn_ares code currently
depends on it (half the functions pass an sgsn instance pointer around, but the
other half use the global one).
In the unit tests, wrap away the ares initialization so that they can work
without a DNS server around. The netcat test breaks because of this, will
remove it.
Using sgsn_ares, implement the gtphub_resolve_ggsn_addr() function, I hope:
untested.
Minor cosmetics just to see if you're paying attention... ;)
Sponsored-by: On-Waves ehi
First steps towards a new GTP hub. The aim is to mux GTP connections, so that
multiple SGSN <--> GGSN links can pass through a single point. Background:
allow having more than one SGSN, possibly in various remote locations.
The recent addition of OAP to GSUP is related to the same background idea.
(This is a collapsed patch of various changes that do not make sense to review
in chronological order anymore, since a lot of it has thorougly transmorphed
after it was first committed.)
Sponsored-by: On-Waves ehf
Extend the ul/dl counting to count the usual messages on the
Gb interface. Add counters for the attach, routing area update,
pdp context activation and deactivation procedures. Update the
test result with the new counters.
RPM post-build-checks found some issue and marks these as error:
[ 38s] I: Program returns random data in a function
[ 38s] E: openbsc no-return-in-nonvoid-function meas_vis.c:118
Holger reports that the bitmap that accounts for available Osmux circuit
IDs is limited to 128, when the maximum number of circuit IDs are
determined by the uint8_t field in the header (ie. 256 circuits).
[hfreyther: Update the testcase now that we have more ids to allocate]
Trigger an OAP registration upon IPA connect. Feed incoming OAP messages to
oap_handle() and send replies returned by it.
Add oap_config to sgsn_config (todo: vty).
Sponsored-by: On-Waves ehf
[hfreyther: Fix coding style]
Add new kitchen sink openbsc/utils.h and libcommon/utils.c to make three so far
static functions public (so I can use them in the upcoming OAP code).
A place to put them could have been the gprs_utils.h, but all general functions
in there have a gprs_ prefix, and todo markings to move them away. All other
libcommon headers are too specific, so I opened up this kitchen sink header.
Replace the implementation of encode_big_endian() with a call to
osmo_store64be_ext(). See comments.
Apply the change in Makefiles and C files.
This change has some implications for the test case. It manipulated
bss_ptmsi_state and sgsn_tlli_state variables to make the output of
rand_r() and thus the TLLI/TMSI used predictable.
This possibility is gone when using RAND_bytes() so instead it is
overridden by a function that returns a deterministic sequence of values
(0x00dead00, 0x00dead01, ...). The test cases are adapted to expect
these values instead of the pseudo random values before.
The gbproxy_test stdout file changes as well, but only where the
TLLI/TMSI is displayed (in the hex dumps as well as the TLLI cache
entries). All other output is the same.
This (currently empty) function is meant to contain code that cleans
up the left-overs of the test functions. This is needed by the next
commit to reset the RAND_bytes sequence.
Currently just the number of intercepted downlink messages is counted
and eventually checked. The contents of the messages is lost. The
PTMSI contained in ATTACH/RAU Accept messages is just 'guessed' by
resetting the random number generator after reference PTMSIs have
been generated. While this works with rand_r, RAND_bytes cannot be
forced to recreate a certain number sequence this way (unless the
backend is replaced).
This commit changes that behaviour so that the last received msgb is
kept and decoded. The PTMSI that has been assigned by the SGSN is
then taken in the affected test cases and used instead of a 'guessed'
one. This is similar to how a real MS would react to the Accept
message.
Sponsored-by: On-Waves ehf
This (currently empty) function is meant to contain code that cleans
up the left-overs of the test functions. This will be needed by the
next commit that will store the last received msgb for later inspection.
Sponsored-by: On-Waves ehf
Neels Hofmeyr
Harald Welte
Holger Hans Peter Freyther
Martin Hauke
Daniel Willmann