Unfortunately "-std=c99" is not sufficient to make gcc ignore cold that
uses constructs of earlier C standards, which were abandoned in C99.
See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for
some related discussion.
Change-Id: Ic92aa70d569778a776f4c5d24c455f71fd50b61b
In an upcoming patch, handover_decision_2.c will use this indicator to
decide whether to start a penalty timer:
"hodec2: add low-rxqual-assignment penalty timer (2/2)"
Id00a07313fe04eec509b336c0637b59c707760e0
Related: SYS#5198
Change-Id: I5de385e0666f716184a62e6e70d656545ac5d2ee
Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor
configuration that was so far only described in the manual without actually
being in operation.
This first allows re-using ARFCN+BSIC pairs in and across BSS.
So far the handover_start() code always looked for handover target cells across
*all* local cells, even if they were not listed as neighbors to a source cell.
Imply all cells as neighbors only as long as there are no explicit neighbors
configured. As soon as the first 'neighbor' line appears in a 'bts' config,
only the listed neighbors are regarded as handover target cells. (The
'neighbor-list' commands are not related to this, only the relatively new
'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.)
TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of
neighbor configuration: both the legacy implicit all-cells-are-neighbors as
well as allowing only explicit neighbors by config.
Related: OS#4056
Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
This reverts commit 94c9324fe0.
Multiple ttcn3 handover tests were broken due to this commit. Let's
merge this once all the other commits pertaining to that fix can be
merged as well.
Fixes: OS#3942
Change-Id: I01d93778fb19c601c21f99ec4d2a3ab8a4a48f67
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
Harald Welte
Neels Hofmeyr
Daniel Willmann