This way we avoid triggering timers and doing extra poll loops for each
BTS which is configured but not up. It also has the effect of removing
logging about estimating paging buffers for BTS which are down, which
can be confusing.
Furthermore, since work is delayed until the TRX and cell in general is
configured, the first estimation is properly done now since the correct
configuration is in place at that time.
Related: SYS#5922
Change-Id: I1b5b1a98115b4e9d821eb3330fc5b970a0e78a44
Reaching this point will only make system load (CPU, mem) grow, making
it hard for the process to keep up with work to do, with no benefit
since the requests will anyway be scheduled too late.
Related: SYS#5922
Change-Id: I6523c6816a4d16b71084d004e979be40cf0aeeb0
This was so far workarounded in tests by manually freeing the fields.
However, in follow-up patch the paging queue will also be properly
freed, so free of the counters needs to be previously fixed too so that
counters are freed at the right point of time.
Otherwise, during paging queue flush, counters are used and would crash
because they were freed before the BTS object in each test's bts_del().
Change-Id: Id213e21cf9bfc5439021e459c22ba4704d8cae2b
* Don't copy features for osmo-bts and nanobts initially, wait until
BTS reported its features
* Checks for BTS features in VTY cmds: pass if features are not known
(not yet reported by the BTS), fail if the feature is missing
* Once BTS reports its features, check relevant VTY config parts again
Related: SYS#5922, OS#5538
Change-Id: I7fca42a39a4bc98a6ea8b9cfab28c4bad3a6a0aa
Its name is totally misleading, since they seem to be related to
GetAttributes messages rather than SetAttributes.
Change-Id: I306cb407dbd9b98e301b5d93046bdadcb466b82b
When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: I030c88545cdc71b3ad9e83f9c2ba7b27177c2ac8
When bad RxQual causes handover to a cell with weaker RxLev, then
handover oscillation *will* happen, as shown in test_rxqual.ho_vty.
Introduce a penalty timer for a cell where we had bad RxQual.
This delays handover back to the cell with stronger RxLev by the penalty
timeout; hopefully the interference is gone after the timeout.
Usually, we set new configuration elements so that osmo-bsc behaves the
same as before the config item was added. In this instance, this makes
no sense, because no-one ever wants handover oscillation from bad
RxQual, which is guaranteed to happen without the new penalty timer. Set
it to 60 seconds by default, same as other penalty timers.
Related: SYS#5911
Change-Id: I057b156604a104a26a7ce45d1c7adadbf452c932
I find it weird that we store the A5 algorithm ID in a format that
is used on the wire: N + 1 (valid for both A-bis and A interfaces).
What confused me even more is that in some functions we print it
as if it was in a normal, human-readable format. And this is
also why one can see weird constructions like:
if (lchan->encr.alg_id > ALG_A5_NR_TO_RSL(0)) { ... }
Let's ensure that our internal structures use the A5/N format:
alg_id=0: A5/0 (0x01 on the A-bis/A interface)
alg_id=1: A5/1 (0x02 on the A-bis/A interface)
alg_id=2: A5/2 (0x03 on the A-bis/A interface)
...
alg_id=7: A5/7 (0x08 on the A-bis/A interface)
so that we can print and compare the value of alg_id without using
additional arithmetics. Let's also rename 'alg_id' to 'alg_a5_n'
as it most clearly indicates which representation it is storing.
This is how the above code snippet would look like:
if (lchan->encr.alg_a5_n > 0) { ... }
Change-Id: Ieb50c9a352cfa5481aebac2379e0a461663543ec
Teach osmo-bsc to handle empty N-Connect. So far we were always
expecting user data in an SCCP N-Connect from an MSC. However, it is
perfectly valid for an initial BSSMAP request to follow later.
This is relevant for:
- Handover Request (incoming inter-BSC handover)
- Perform Location Request (query physical location of the MS)
Add state WAIT_INITIAL_USER_DATA with new timeout net X25. Always enter
this state so that we don't have two separate code paths for handling
initial user data.
Related: SYS#5864
Change-Id: I535c791fa01e99a2226392eb05f676ba6c3cc16e
According to 3GPP TS 44.018, section 10.5.2.1b.2, only ARFCN values
in range 1..124 can be encoded using the 'bit map 0' format. Before
this patch, ARFCN values belonging to E-GSM band (0, 975..1023) were
ignored in bitvec2freq_list(), and thus not present in the resulting
Cell Channel Description IE.
Change-Id: I17739e6845cd84e2a81bc406dd532541f7c52cb6
Related: SYS#5854
This commit demonstrates what happens when a cell has channels in
both P-GSM and E-GSM bands (case 'c'). As can be seen from:
Case a) only the BCCH carrier: 10
Case b) more carriers from P-GSM band: 1 3 10 64 99 124
Case c) more carriers from E-GSM band: 1 3 10 64 99 124
in both cases 'b' and 'c' we have the same set of ARFCNs. Carriers
from the E-GSM band are not present at all. This is wrong and will
be fixed in the follow up change(s).
Change-Id: Ied0519c70501f105673a9b36657101063d275058
Related: SYS#5854
As the comment above the fix suggest, the encoding is in 10ms units.
osmo-bts is also doing the proper:
"""
uint8_t t3105 = *TLVP_VAL(&tp, NM_ATT_BTS_AIR_TIMER);
bts->t3105_ms = t3105 * 10;
"""
Related: SYS#5838
Change-Id: Ie190514ee35d1ca81b70e9180bf7393b973d3504
The timer (T4) that controls the re-sending of the BSSMAP RESET can not
be changed via the VTY, althrough it is defined via a tdef struct. Lets
add a description along with default values to make it configurable via
the VTY.
Change-Id: I1fb5699220ab8a643a168567a89c6f381fe433a7
Related: SYS#5796
Properly implement the separate conn release stages in separate FSM
states:
x) sent Clear Request, wait for a Clear Command from the MSC.
Timeout after a configurable 60s.
y) after a Clear Command and sending a Clear Complete, wait for the SCCP
RLSD. Timeout after a configurable 60s.
z) terminate after the RLSD is received / after timeout.
handover_test.c needs a little tweak to make the MGCP release work with
its fake MGCP client, because cleanup now ensures to invoke
gscon_forget_mgw_endpoint() in all cases.
Related: I680ec4ed866aa5f0b1ff29e7e98322615cfb288d (osmo-ttcn3-hacks)
Related: OS#5337
Change-Id: Ie975117d37f38ba853589dc7f8d3e94f8f9586b2
osmo-trx-uhd with a B200 has proven to provide bad (lower than usually
considered good) C/I values due to high noise (even with band filters in
place). Hence, default thresholds (gathered from literature on the topic)
are too high and end up in bad algorithm output decisions.
Furthermore, most users of Osmocom don't use it in densely populated
areas, hence RXLEV based algorithm used when C/I based one is disabled
is good enough.
Let's disable C/I based one by default, and let advanced users which
specific needs to enable and confiure thresholds specifically for their
needs (hardware, cell surrounding conditions, etc.).
Related: SYS#4917
Change-Id: If1a73c60695379bcfcd0f44c6ec6dd659563e279
This is a candidate for adding to libosmocore (as osmo_time_cc), but
let's first use this in osmo-bsc to make sure that it works as intended.
I started out expecting to be done with this in half an hour, but I
found out that accumulating elapsed time to an integer counter has a
staggering amount of complexity to it, and a million pitfalls.
The intended use is to report allAvailableSDCCHAllocated and
allAvailableTCHAllocated performance indicators in OsmoBSC. Hopefully
this will also be generally useful elsewhere, to be worth the effort.
Related: SYS#4878
Change-Id: Icdd36f27cb54b2e1b940c9e6404ba9dd3692a310
It's more logical to have the boundaries sorted in ascending order:
* band 1 represents lowest interference levels,
* band 5 represents highest interference levels.
Change-Id: Ie9bf4bf0c89418685b8ea5096332d22cfba7c521
Related: SYS#5313
It is possible to change the neighbor-list mode via the VTY from
automatic mode to manual neighbor-list configuration. In the manual
mode, the user can add ARFCN values manually. This command can be found
under the bts node. Lets add pendant of this command on the control
interface as well.
Change-Id: Id97bc0d31a358db6221c385761773fb48670c921
Related: SYS#5641
The VTY allows flexible control over the neighbor cell information via
the neighbor command, which can be found in the configure terminal under
the bts node. Lets add pendant of this command on the control interface
as well.
Change-Id: I343a40e18fa9b91e6c381912c0426a002841e079
Related: SYS#5641
The value ncc_permitted is preset in osmo_bsc_main.c from
bootstrap_bts(). It is a constant value that also cannot be changed via
the VTY. Therefore it should be set from bts_alloc(). This also fixes
the problem that when the BTS is added at runtime from the VTY. BTSs
added at runtime would have an all zero ncc_permitted until the next
restart of osmo_bsc.
Change-Id: I9f02277d7b4b4bcb383e749435416a0b22efd5e8
Related: SYS#5369
These are not needed anymore since we re-introduced libbsc, specially to
avoid all this churn.
Some specific methods are explicitly required to be overwritten by
tests, so we specificially mark those with __attribute__((weak)) in
order to be able to overwrite them.
This is the last step towards fixing interdependency mess of symbols and
stubs, and requires previous patches in order to have tests apssing
fine.
Change-Id: Ic7401b8a6eb903882e30fda1cf091ac99a254ef0
This allows having it initialized automatically, as we usually do with
this type of code. As a result, tests or other apps importing libbsc
don't need to take care of calling it.
NOTE: This fix is required by follow-up patches where some stubs are removed
and hence some tests start using FSMs internally. Since tests were not
using those FSMs before, there was no need to call ts_fsm_init().
This is one further step towards fixing interdependency mess of symbols
and stubs.
Change-Id: I0e4b95b5e73fbb3844d83ba33e66786831088e1f
This is used inside group of files forming libbsc (shared files used by
several apps). Let's instantie only once inside a file from libbsc
instead of doing so on each binary.
This is one further step towards fixing interdependency mess of symbols
and stubs.
Change-Id: I9b287aa492ca6aae5fc56133e1510aff3146fe25
Increase the reaction time at the expense of more stable loop with less
temporary oscillations.
See updated user manual documentation in this commit for a larger
description.
Related: SYS#5371
Change-Id: I46be244a5e01a74086e3a977ec3ea139742a0074
* Adds vty option dyn-bsc for ms-power-control -> mode
* Imports power_control.c from osmo-bts project
[at commit 2f3cd4b697972d8484f9a9d3b7ef634086f65fa5]
* Removes unused C/I code from osmo-bts's power_control.c
This patch then calls the power loop on receipt of measurement
reports and updates the MS Power Level accordingly.
Change-Id: Ibc307e758697eb5ca3fb86622f35709d6077db9e
Improve the current VTY support to allow enabling/disabling C/I logic
independent from value setting. This way C/I support can be quickly
disabled & enabled.
Reminder: changing power parameters still require VTY Command "bts NR
resend-power-control-defaults" to be excuted prior to new parameters
being applied on the BTS.
Related: SYS#4917
Change-Id: Id1224c2d9a52db2ed805c49e048d3086ed0167f5
Setting LOWER_CMP_N and UPPER_CMP_N for all channel types can be quite
cumbersome and end up in lengthy config files. Let's instead add a
placeholder command to apply it to all channel types of a BTS at once.
This is useful specially since a user disabling C/I capabilities
probably does so because it may require a fair amount of fine-tuning
parameters to have it working perfectly. Hence, a user not willing to
spend time configuring those parameters correctly (and for which default
ones doesn't work properly) will require quick way to get rid of C/I
based MS Power Control Loop. By disabling C/I comparison, osmo-bts will
rely on RxLev only when applying the MS Power Control Loop, which is
fine for non noisy environments.
Related: SYS#4917
Change-Id: I0e1a1a9228a15e9ec9c41b7952b03e1d25309706
TS 45.008 section 4.7.1:
"""
Upon receipt of a command from an SACCH to change its power level on the corresponding uplink channel, the MS
shall change to the new level at a rate of one nominal 2 dB power control step every 60 ms (13 TDMA frames), i.e. a
range change of 15 steps should take about 900 ms. The change shall commence at the first TDMA frame belonging to
the next reporting period (as specified in subclause 8.4). The MS shall change the power one nominal 2 dB step at a
time, at a rate of one step every 60 ms following the initial change, irrespective of whether actual transmission takes
place or not.
"""
Since the reported MS_PWR in L1 SACCH Header is, according to specs, the
one used for the last block of the previous SACCH period, it becomes
clear the first SACCH block after a requested MS Power Level change by
the network may contain mismatches between the announced MS_PWR by the
MS and the measured Rxlev/RxQual. Hence, let's better use a
P_CON_INTERVAL of 1 which retriggers the MS Power Control Loop every second
SACCH block.
Related: SYS#5371
Change-Id: Iade5b597e0e56b07c6d78995fcec7c641e4e643f
This commit extends existing VTY and RSL infrastructure to configure and
manage MS Power Parameters used in MS Power Control loop, by adding
support to set up Carrier-to-Interference (CI) parameters.
Using C/I instead of existing RxQual is preferred due to extended
granularity of C/I (bigger range than RxQual's 0-7).
Furthermore, existing literature (such as "GSM/EDGE: Evolution and Performance"
Table 10.3) provides detailed information about expected target values,
even different values for different channel types. Hence, it was decided
to support setting different MS Power Parameters for different channel
types.
These MS Power Parameters are Osmocom specific, ie. supported only by
newish versions of osmo-bts. Older versions of osmo-bts should ignore
the new IEs added just fine. The new IEs containing the MS POwer
Parameters are not send for non osmo-bts BTSs, hence this commit is
secure with regards to running osmo-bsc against an ip.access BTS such
as nanoBTS.
Related: SYS#4917
Depends: libosmocore.git Change-Id Iffef0611430ad6c90606149c398d80158633bbca
Change-Id: I7e76ec47b323d469f777624b74b08752d1f5584f
Since the libosmo-mgcp-client now supports MGW pooling, lets use this
feature in osmo-bsc. Large RAN installations may benefit from
distributing the RTP voice stream load on multiple media gateways.
Depends: osmo-mgw Icaaba0e470e916eefddfee750b83f5f65291a6b0
Change-Id: I8f33ab2cea04b545c403a6fe479aa963a0fc0d0d
Related: SYS#5091
Allow resetting the BSSMAP link from VTY, for BSC_Tests.ttcn.
In the field, detecting that an MSC is lost is done by getting three
connection failures in a row. For the BSC_Tests, it is easier to just
provide a VTY command to reset an MSC's link status.
I want to add tests that verify the stat items reflecting the MSC
connection status. To be able to run a test expecting fewer connected
MSC after a test that launched more MSCs requires the links to be reset.
Related: SYS#5542
Related: Ice3056dc46c94f9399f8379db7aeb7193782f2f2 (osmo-ttcn3-hacks)
Change-Id: I1975941b790d2b30d0904d41e456220cba26ecff
Add experimental 'pre-ts-ack' to the 'immediate-assignment' options:
send the IMM ASS even before a dynamic timeslot is switched. This
possibly saves an Abis roundtrip, but may be racy.
When pre-ts-ack is chosen, already do the IMM ASS before the dyn TS
pchan switch is ACKed.
In Immediate Assignment, in case the dyn TS is not ready yet, get the
pchan kind from lchan->type, which already reflects the target type, and
not from ts->pchan_is, which still reflects the previous pchan type.
Related test is in I2ae28cd92910d4bc341a88571599347a64a18fe5
Related: SYS#5559
Change-Id: I19e6a3d614aa5ae24d64eed96caf53e6f0e8bb74