* move value_string definition and corresponding functions for BTS type
to shared header to make it re-usable by OsmoBTS
* use consistent function naming
* add similar functions for BTS variant
* add enum to be used by OML Attribute Reporting to distinguish between
type, variant and other info
Change-Id: Ida94725a6fce968443541e3526f48f13758031fd
Related: OS#1614
Supporting SI2quater as per 3GPP TS 44.018 will require chnages to the
way System Information is stored because it uses 1:n instead of 1:1
mapping between SI type and generated SI content. This should not affect
other SI types though. To facilitate this transition:
* convert the code to always use GSM_BTS_SI helper instead of accessing
buffer directly
* make helper more robust by adding extra parenthesis
* add similar helper for gsm_lchan
* add function estimating number of SI2quater message to hold configured
number of (U|E)ARFCNs
* add SI2q index/count fields and pass them to rest_octets generator
explicitly
* internalize buffer access in generate_si* functions
Change-Id: I74e4e3cb86364cec869a1472a41b4a95af0d50dd
Related: RT#8792
* set proper flag when saving MS Timing Offset
* use gsm_subscriber's IMSI or lchan's name if bsc_subscriber is unknown
* add comments with spec reference
* store/display MS Timing Offset instead of raw Timing Offset field from
RSL
* Compute MS Timing Offset [-63; 192] from Timing Offset field [0; 255],
adjust structure gsm_meas_rep with proper type to store it
Change-Id: I7e003d23a6edb714c5f17688fd6a8edac131161d
Related: OS#1574
* add version string to gsm_bts
* add PCU version string to gsm_bts
* rename GSM_BTS_TYPE_OSMO_SYSMO -> GSM_BTS_OSMOBTS to avoid confusion
between BTS model and variant
* add variant enum to gsm_bts_model using enum with variants for each
hw vendor of OsmoBTS
* show connected PCU version (if available) in vty via 'show bts'
This will come in handy when logging details regarding particular BTS
reported via OML, see:
Related: OS#1614
Change-Id: I6710d53115f34634a7b70969cc05fd5c72ff8ab2
This option allows to enable or disable TCH/F allocation on the
TCH/F_TCH/H_PDCH timeslots. Until now, source code modification
was required to enable this feature.
Related: OS#1778
Change-Id: Id18cab25844dc854a66b4e2713e90c3f43afa712
Explicitly check for and log PCU version received from BTS via OML alert
message.
Change-Id: I3c88663d4e2887a4038b4c3f1387128295b8934e
Related: OS#1614
ericsson can handle a reference at the end of a imm assign command which is used in
the confirm response. The confirm response is only sent if the trailer is present.
Change-Id: I88560291b5a3a3d7a0bac4d3c089b45f1f6b297f
When the BTS is configured to use a SuperChannel and it is using a
unix domain socket based transport towards the L2TP daemon, then
we must instruct the L2TP daemon to instruct the SIU to change the Abis
Lower Transport Mode using the ALTCRQ / ALTCRP L2TP signalling.
Change-Id: I672bfaa09c42fbeb0c8459f24b2222b952de954b
Previously any OML NACK message will result in BSC dropping OML link to
BTS which makes it impossible to use optional OML messages which might
be unsupported by BTS. Fix this for 3GPP TS 52.021 §8.11.1 Get
Attributes message. Also, log human-readable NACK name to see what
exactly causing OML link drop.
Change-Id: Ib8af2872c27abb793172ec59bdc145b8d54f83da
Related: OS#1614
The timer T3186, which is described in 3GPP TS 44.060, is using 3
bits of the si13 mac block. This requires special encoding. In the
case of T3186, the value is encoded by the formula: bits = t/500-1.
Our implementation uses the formula bits=t/500, which is incorrect.
Change-Id: Ifd340c536cff2d1c4b1b3677a358ea95438801eb
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will
not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC
subscriber: struct bsc_subscr.
Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no
longer have a backpointer to gsm_network (used to be via subscr->group).
Create a separate logging filter for the new BSC subscriber. The implementation
of adjusting the filter context is added in libbsc to not introduce
bsc_subscr_get/_put() dependencies to libcommon.
During Paging Response, fetch a bsc_subscr from the mobile identity, like we do
for the gsm_subscriber. It looks like a duplication now, but will make sense
for the VLR as well as for future MSC split patches.
Naming: it was requested to not name the new struct bsc_sub, because 'sub' is
too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function
prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to
match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast
to type, relatively short, unambiguous, and the naming is consistent.
Add bsc_subscr unit test.
Related: OS#1592, OS#1594
Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
Add via_ran to gsm_subscriber_connection to indicate whether a conn is coming
in via 2G/GERAN/A-Interface or 3G/UTRAN/Iu-Interface. Prepares for Iu, but
also for libvlr to decide between GSM or UMTS Auth.
Until actual Iu support is merged to master, this indicator will aid VLR unit
testing.
At some point we may also add RAN_GERAN_IU; it's not on the agenda yet, but to
clearly distinguish the names if we want to add it, explicitly name the ones we
have RAN_GERAN_A and RAN_UTRAN_IU.
Change-Id: I93b870522f725170e4265a5543f6b680383d7465
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I13554563ce9289de126ba0d4cf329bafcda35607
In libosmocore, my patch was merged to master a bit too soon. To accomodate the
request for naming that matches the general "LOG" prefix instead of "LOGGING",
a fixup was committed to libosmocore. Adjust for that.
Original patch: change-id I5c343630020f4b108099696fd96c2111614c8067
The fixup: change-id I424fe3f12ea620338902b2bb8230544bde3f1a93
Change-Id: Ib2ec5e4884aa90f48051ee2f832af557aa525991
The LCHAN and BTS filter contexts are actually never used, so drop them until
someone adds them properly.
For now use only LOGGING_{FILTER,CTX}_VLR_SUBSCR. Some of these will change to
_BSC_SUBSCR once struct bsc_subscriber is introduced, and later on, struct
gsm_subscriber will be replaced by vlr_subscriber so that the names will match.
Depends: libosmocore change-id I5c343630020f4b108099696fd96c2111614c8067
Change-Id: Ifa82f6a461ad4c0eeddb8a38fb3833460432d16b
* add vty command to set E-UTRAN_PRIORITY, THRESH_E-UTRAN_low and
E-UTRAN_QRXLEVMIN according to 3GPP TS 44.018 Table 10.5.2.33b.1
* remove old command which does not support those parameters
Change-Id: I36dcc79f7b7a02036e74720923d0df1a2a2db504
Fixes: RT#8792
Log more data related to channel allocation:
- channel type
- number of paging attempts
- timers fired
Change-Id: Ib417a9c942c17b902dd80ff555cd9da5f91bff48
Since ce9fec3e896571835ac5bfd2980d6836f2b29f0d libosmocore ignores
parameters to log_vty_command_* functions. Hence parameter of
logging_vty_add_cmds() is ignored too. As we depend on much later
libosmocore version anyway, we can simplify code somewhat by removing
parameters which will be ignored anyway.
Change-Id: I62f752fd88f1d8fefa563648f9864c7c31f87991
The currently unused function abis_om2000_vty.c:con_group_del()
allows deleting OM 2000 connection groups. This commit adds a
matching VTY command to make use of it.
Change-Id: I39a90b06e19356c536cacd1c923e195dd305ab80
Added in recent commit 42def7205b
"Implement VTY configuration to control Early Classmark Sending"
Change-Id: Iaf640fa6e1f234f594fb8dc06f716d3d3e95eb2a
all other objects always use the MO instance. The existing code
likely is due to copy+paste mistakes.
Change-Id: Ie0a31cd93993da10f31eecf530a5a05773c11eb1
The SI3 rest octests contain a flag that indicates if early classmark
sending is allowed in this cell or not. So far we always set this to
one, now it is configurable using the 'early-classmark-sending' command
at the VTY node.
Change-Id: Ia0b1cc5ab45673f3da70c59ae8917eba343f9862
Use CTRL_CMD_DEFINE_RO(), CTRL_CMD_DEFINE_WO() and
CTRL_CMD_DEFINE_WO_NOVRF() where appropriate to get rid of boilerplate
code.
Change-Id: I5bcea0b4f4b8f535bef2b423f2013b8b4a218b5b
* Explicitly check when ARFCN array split is impossible and return
gracefully instead of using negative index.
* Separate range encoding into generic function and use it for all
SI-related things.
* Propagate the error into that function and to its callers.
* Add separate test-case for the segfault previously triggered by this bug.
Change-Id: I3e049ab2d7c1c4d6c791b148f37e10636a8e43e0
Related: RT#7379
* clearly separate report parts
* use textual representation for failure cause if possible
Change-Id: I7a98a77011463021d0edd6ecfab1680e211f7e16
Related: OS#1615
* add missing spaces after comma and minus
* prevent useless recursion calls
* mark static functions as such
* name and explicitly use enum for ARFCN range
Change-Id: If5b717445c8b24668bad0e78fd5bb51f66c4d18e
GSM48_CMODE_DATA_6k0 was not properly terminated and thus resulted in a
bug.
Change-Id: I4000f06d0b49c4afb0446beddd150521c4ba3cf0
Fixes: Coverity CID 148207
For TCH/F_PDCH in PDCH mode, directly return the lchan to use, in order to
switch it to TCH/F. To check the pchan type in chan_alloc.c, make ts_pchan()
public in gsm_data_shared.h.
Commit c3f72f63af broke TCH/F_PDCH, as a fallout
of setting the GSM_PCHAN_PDCH subslots number to 0. This is sane and correct,
but the chan_alloc code failed to see a ts as available if it has no subslots.
Explanation:
_lc_find_trx() checks each timeslot. For normal, static TCH timeslots we
determine the number of logical subslots contained and check whether one of
them is free. For dynamic TS, we can do the same when in TCH mode, but when in
PDCH mode, we already know that it is available for immediate switchover for
voice and hence can return it right away. TCH/F_TCH/H_PDCH already has a
special check for that. TCH/F_PDCH doesn't, but this worked for TCH/F_PDCH as
long as ts_subslots() returned 1 for PDCH: the for-loop at the bottom of
_lc_find_trx() checked one subslot, which succeeded on an lchan in PDCH mode,
since PDCH lchans are always marked type == NONE and state == NONE. Now we more
accurately acknowledge that a PDCH timeslot has zero subslots and that a
dynamic timeslot in PDCH mode can always be switched to voice immediately,
without checking lchan type or state.
So, above mentioned commit set PDCH to zero subslots, and the for-loop to check
the (zero) subslots never ran and hence never returned the lchan. This fix adds
a special condition for TCH/F_PDCH in PDCH mode, same as TCH/F_TCH/H_PDCH.
(Todo: ts_pchan() can probably be used in other places as well to remove some
code dup. Leaving that for another patch.)
Fixes: OS#1868
Change-Id: I5d555d018a5bcb8d948e54059d32ec4c9b3070d0
Preparing cosmetically for a subsequent commit which will add another pchan
kind to be checked, rather use a "switch (pchan) {}". Also reverse one if()
branch to "early-exit" style.
Change-Id: Ie5eb0fa859c4f225616095dc56d52ce0f2dc8bdc
This is useful particularly in case where we deactivate PDCHs
which don't have a SACCH associated. The existin code would
always attempt to deactivate a SACCH even in those cases, leading
to the BTS responsding with related error messages.
Change-Id: Iaf46782329b38ba8f3d438e6c75c2d467b852734
Pablo Neira Ayuso
Harald Welte
Neels Hofmeyr
Philipp Maier