This is a BSC, it has norelation to RANAP or Iu(h). Let's remove
an references to it, and also the build dependency to libosmo-ranap-dev
Change-Id: I517b9f69309b2ed0540dd6c186b3d4a2a03aed44
* remove checks for non-existent tests
* always enable bsc and nat-trie tests because both are built
unconditionally
* enable gsm0408 test which was removed by mistake
* adjust gsm0408 test output to remove SMS-related results
Change-Id: I73ad079a6333ba56e73b7c4d1d0e9c8255c2a03b
Related: OS#2257
This adds a test case to explicitly verify the BA-IND is as expected
by the behaviour introduced in Change-Id I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Related: OS#2525
Change-Id: I3e5b260af97ce96a221e4d51f6c1b41d58817a59
In masurement reports sent by the MS, this can then be used to correlate
if a given measurement report was in response to a BCCH/neighbor list
received on BCCH (SI2xxx) or on dowlink SACCH (SI5xxx).
Closes: OS#2525
Change-Id: I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Save the time when OML link to BTS was established and show it in
vty. That's useful when troubleshooting issues like periodic/sporadic
BTS restart.
Related: SYS#3889
Change-Id: I9e4e8504afe8ca467b68d41826f61654e24d9600
Previously we've used function so debug print always pointed to the same
place which is not very useful. Wrap it with macro so proper
file:line is printed. Also, make sure that we always change state only
through this wrapper and log only when the state has changed.
Change-Id: I21789f8021290965b61a54a2b23177ccbbfe8321
Now osmo-bsc.cfg's SCCP addresses work by internal defaults, while
osmo-bsc_custom-sccp.cfg shows how to use custom STP IP address and SCCP point
codes.
Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd
According to 3GPP TS 44.018 §1.8 the "network shall never enable PBCCH
and PCCCH".
Change-Id: I319e71a4b0c682361529e9c21377398a826b934b
Related: OS#2400
Fix three instances of VTY tests working because it used to include implicit
'exit' commands to the parent node.
Since libosmocore change-id Id73cba2dd34676bad8a130e9c45e67a272f19588 = commit
d64b6aed235f6e4d84a2cb8e84b32c3179260254, we no longer do this implicit-exit in
interactive VTY shells.
*) in testPingPongConfiguration, the intention is to enter the /msc 0 node.
Drop prior entry of the 'network' node, which looks like an oversight. So
far the 'msc 0' caused an implicit 'exit' and thus worked, now fails.
*) Two instances following comments "# Check searching for outer node's
commands", which look like they are intended to check for this implicit-exit
behavior. This is obsolete, drop those parts of the tests.
Change-Id: I77931d6a09c42c443c6936000592f22a7fd06cab
* log administrative state transitions
* log what's caused it
* while at it, mark boolean variable as such
Change-Id: I3e25a19fac4d0b4886d825c9876771b1f66efe58
Related: SYS#3864
After osmo-mgw change I8e0b2d2a399b77086a36606f5e427271c6242df1, there now is a
separated libosmo-mgcp-client, and osmo-bsc needs adjusting.
But besides having an unused struct in gsm_network, osmo-bsc does not yet use
its MGCP client; these are merely plans for the future. Until we do, let's just
drop the dependency entirely.
Change-Id: I6402c7cbe58dacae7630f7f03819f8102e54c699
These either remain from openbsc.git or slipped in while applying recent
patches from openbsc.git and do not belong in osmo-bsc.
Empty out contrib: remove things that are either obviously unrelated to
osmo-bsc, or seem old and/or esoteric.
osmoappdesc.py: drop nitb_e1_configs (and some ws)
Change-Id: Ib20064f35e623d99c7d59496a3156e84b8a0d07a
There is no Iu in a BSC, this was from old times with OsmoNITB. This
configure option now lives in osmo-msc.git
Change-Id: I9cf1c430855fe8a59fea1cf0abb3242c38d45cea
smpp_mirror is maintained in osmo-msc.git, so let's remove it
(and the associated libsmpp34 build requirement).
Change-Id: Ia7b242cc52cf261b1a5dd3c287da2868e1a2b9a8
This is the OsmoBSC project. Disabling the build of the BSC would be
somewhat odd, so let's remove the option.
Also, OsmoBSC depends on libosmo-sccp now, so we must unconditionally
depend on it. As a result, we can remove the --enable-nat option,
as this was only to avoid a mandatory libosmo-sccp requirement in
historical times.
Change-Id: Icfee8a904d33b7c13ab8d185d64fb5c2337d8640
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
In SGSN, actually place the port in the SGSN config by default, so that the
gsup port may now be omitted in the VTY config (the IP address suffices).
Adjust the osmo-sgsn.cfg example.
Depends: I4222e21686c823985be8ff1f16b1182be8ad6175 (libosmocore)
Change-Id: I50f2040e2eb0baacb43849e93cfed10cbc2fc156
Currently the force_realloc feature is turnd on and of in a
hardcoded way. This patch makes the option available via VTY.
Change-Id: Ic8740512c5ea0766ff6ceb1c28b9c2b3fe46e75f
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
This option was present in very early versions of the NITB, but
at least since 2011 it is no longer supported. It's still listed
in --help output, which is wrong.
Change-Id: I1d2cceb588ec5fb34ec5e2c05a7d8c93310bee88
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
libsmpp34 already converts received TLV integer values to native
endianess in libsmpp34_(un)pack.
Converting them again at receive time swaps the 2 bytes of
user_message_reference, then using a wrong value. As GSM03.40 spec
uses only 1 byte for the id, then only the high byte of the initial
value is used and eventually sent back to the ESME. Again, at that time,
htons() is not needed because libsmpp34 already handles that part.
See OS-#2429 for more details.
Change-Id: If748548a4a223e529a1110c89e483b599b406e8b
I already stumbled into 2 compilation environments which had Werror
enabled for -Wmaybe-uninitialized and the build failed, so let's
workaround this warning.
| smpp_openbsc.c: In function 'handle_smpp_submit':
| smpp_openbsc.c:216:9: error: 'sms_msg_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| memcpy(sms->user_data, sms_msg, sms_msg_len);
| ^
| smpp_openbsc.c💯15: note: 'sms_msg_len' was declared here
| unsigned int sms_msg_len;
| ^
| cc1: some warnings being treated as errors
Change-Id: I0901ddadb5f72e1585cb1797ac22c8ab95e83146
Harald Welte
Max
Pau Espin
Neels Hofmeyr
Philipp Maier
Keith Whyte