This adds a test case with several messages to test BSSGP patching.
New messages:
- BSSGP/DTAP Attach Request
- BSSGP/DTAP Attach Accept
- BSSGP/DTAP Routing Area Update Request
- BSSGP/DTAP Routing Area Update Accept
- BSSGP/DTAP Activate PDP Context Request
- BSSGP SUSPEND
- BSSGP SUSPEND ACK
Sponsored-by: On-Waves ehf
This parameter is not used (the methods are always called with an
argument of 1 in the third position). Thus the parameter is removed
completely.
Sponsored-by: On-Waves ehf
The type in the schema is integer but we need to use ulonglong to
read it as otherwise the read will fail.
DBI: -7: The requested variable type does not match what libdbi thinks it should be
Currently the terms 'Routing area code' (RAC) and 'Location area
code' (LAC) are used in several places where 'Routing area
identification' (RAI) or 'Location area identification' (LAI) are
meant in fact.
This patch replaces RAC/LAC by RAI/LAI and 'code' by 'identification'
at these places.
Note that RAI := MCC MNC LAC RAC, and LAI := MCC MNC LAC (see GSM
03.03, sections 4.1 and 4.2).
Sponsored-by: On-Waves ehf
Currently when ftmp_extra is set, a doubled a=rtpmap line is emitted
instead of the fmtp_extra info.
This patch fixes replaces the formerly copied and pasted but not
modified snprintf parameters by the correct ones.
Fixes: Coverity CID 1220873
Sponsored-by: On-Waves ehf
Add tests setting the fmtp_extra field to check the response
generation. This triggers a bug found by Coverity.
Addresses: Coverity CID 1220873
Sponsored-by: On-Waves ehf
Currently, if there is no SDP data in the MGCP message received from
the net, the fields containing audio encoding information are not set
in net_end. So in recvonly mode transcoding would not be set up
correctly.
This patch changes the implementation of the code handling CRCX and
MDCX to use the codec signalled in the MGCP local connection options
(field 'a:') if there isn't any SDP data. This is only halfway
negotiation, because the codec is used blindly and not matched
against the supported ones.
Sponsored-by: On-Waves ehf
This patch moves the files relevant to transcoding from
src/osmo-bsc_mgcp to src/libmgcp and src/include/openbsc. Makefiles
and include directives are being updated accordingly.
Sponsored-by: On-Waves ehf
The current transcoder implemenation always does a 1:1 recoding
concerning the duration of a packet. So RTP timestamps and sequence
numbers are not modified.
This is not sufficient in some cases, e.g. when the BTS does only
allow for a single fixed ptime.
This patch decouples encoding from decoding and moves the decoded
samples to the state structure so that samples can be combined or
drain according to the packaging of incoming and outgoing packets.
This patch incorporates parts of Holger's experimental fixes in
0e669e05^..9eba68f9.
Ticket: OW#1111
Sponsored-by: On-Waves ehf
This patch implements audio transcoding between the formats GSM,
PCMA, L16, and optionally G.729.
The feature needs to be enabled by using the autoconf option
'--enable-mgcp-transcoding'. In this case mgcp_transcode.c will
be compiled and linked to osmo-bsc_mgcp, and the transcoding
functions provided will be registered as processing callbacks.
If G.729 support is required, libcg729 needs to be installed and
'--with-g729' must be passed to ./configure.
Ticket: OW#1111
Sponsored-by: On-Waves ehf
Don't show media related lines if the payload type has not been set.
Don't show a 'a=rtpmap' line if the audio_name has not been set.
This patch unifies the SDP generation of create_response_with_sdp()
and send_msg().
Sponsored-by: On-Waves ehf
This patch adds the get_net_downlink_format_cb() callback to provide
payload_type, subtype_name, and fmtp_extra suitable for use in a MGCP
response sent to the network. Per default, the BTS side values are
returned since these must be honoured by the net peer when sending
audio to the media gateway (unless transcoding is done).
Sponsored-by: On-Waves ehf
This patch adds the fields channels, subtype_name, and audio_name to
the struct. The field audio_name contains the full string that has
been used for the last part of a SDP a=rtpmap line. The others contain
decoded parts of that string. If no a=rtpmap line has been given
(e.g. because dynamic payload types are not used), values are
assigned when the payload type matches one of the predefined ones
(GSM, G729, PCMA).
The patch also moves the audio_name parsing code to a dedicated
set_audio_info() function.
Sponsored-by: On-Waves ehf
This patch adds the callbacks rtp_processing_cb and
setup_rtp_processing_cb to mgcp_config to support arbitrary RTP
payload processing.
Sponsored-by: On-Waves ehf
Currently LLC parsing is part of gprs_llc.c which needs large parts
of the SGSN code parsing to fulfill its link dependencies.
This patch moves the functions that just do plain parsing, dumping,
and FCS computation to a different file to avoid these dependencies
if LLC stateful processing is not needed. It also exposes
struct gprs_llc_hdr_parsed and enum gprs_llc_cmd publically.
Sponsored-by: On-Waves ehf
The code currently uses an encoded sequence of (hex) 10 20 30 40 50
60 as RAI, for which no bijective mapping to the set of
representations MCC-MNC-LAC-RAC exists.
This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps
to 112-332-16464-96 (and vice-versa).
Sponsored-by: On-Waves ehf
The patches were posted to the ML but didn't receive review
there. At the time I merge the change I did a Location Updating
Request and the channel was released in a successful way.
In case we receive ERROR INDICATION and CONNECTION FAILURE we only
want to RF Channel Release the lchan once. This code is more simple
and should work as reliable as the previous commit.
When we receive an ERROR INDICATION and CONNECTION FAILURE we
might call rsl_rf_chan_release multiple times. The channel release
handling is still a bit messy and there too many paths that lead
to the call.
1.) In case we receive an ERROR INDICATION for SAPI=3. A RLL
error signal will be emitted that leads to the release of the
channel through the SMS code in case of the NITB. The call to
rsl_rf_chan_release might be a double release.
2.) In case a CONNECTION FAILURE is received when the release
process has already been started we would unconditionally
call rsl_rf_chan_release as well.
Because the lchan state is changed by the callers of the
rsl_rf_chan_release we can not move the state checking into this
code but need to do it in the caller. The issue was seen in a trace
from Rhizomatica and I created the DoubleRelease.st to re-produce
the issue and verified that we have no duplicate RF Channel Releses.
The other option would be to introduce a new state to track
the release process and see if we have already released SAPIs
deactivated the SACCH or such. We can not simply look at these
as for a channel that fails to activate they will be null already.
Looking at the code it seemed possible that a channel would
transition from BROKEN to NONE. Or worse from NONE to BROKEN.
Start the timer _after_ the channel has been released.
Make it possible to inform local CTRL connections about some state.
The TRAP will be only sent to local connections. The notification
text may not contain spaces.
Use the right size for scanf.
=================================================================
==6106== ERROR: AddressSanitizer: unknown-crash on address 0xbffff4b0 at pc 0xb69d87fd bp 0xbffff248 sp 0xbffff21c
WRITE of size 65 at 0xbffff4b0 thread T0
#0 0xb69d87fc (/usr/lib/i386-linux-gnu/libasan.so.0.0.0+0xa7fc)
#1 0xb69d9239 (/usr/lib/i386-linux-gnu/libasan.so.0.0.0+0xb239)
#2 0xb69d92d6 (/usr/lib/i386-linux-gnu/libasan.so.0.0.0+0xb2d6)
#3 0x804f151 (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x804f151)
#4 0x80531e8 (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x80531e8)
#5 0x8051e6f (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x8051e6f)
#6 0x8049b0a (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x8049b0a)
#7 0x804bd9e (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x804bd9e)
#8 0xb6778a62 (/lib/i386-linux-gnu/i686/cmov/libc-2.18.so+0x19a62)
#9 0x8049330 (/home/ich/source/gsm/openbsc/openbsc/tests/mgcp/mgcp_test+0x8049330)
Address 0xbffff4b0 is located at offset 416 in frame <parse_sdp_data> of T0's stack:
This frame has 8 object(s):
[32, 36) 'audio_payload'
[96, 100) 'payload'
[160, 164) 'channels'
[224, 228) 'ptime'
[288, 292) 'port'
[352, 368) 'ipv4'
[416, 480) 'audio_name'
[512, 576) 'audio_codec'
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are*
This addresses an ASAN issue where the request was already deleted
by our callback function.
(gdb) where
#0 0xb69e7810 in __asan_report_error () from /usr/lib/i386-linux-gnu/libasan.so.0
#1 0xb69e0aff in __asan_report_store4 () from /usr/lib/i386-linux-gnu/libasan.so.0
#2 0x0804ea64 in subscr_send_paging_request (subscr=subscr@entry=0xb5103cb0)
at gsm_subscriber.c:212
#3 0x0804edac in subscr_get_channel (subscr=subscr@entry=0xb5103cb0, type=type@entry=2,
cbfn=cbfn@entry=0x804969d <subscr_cb>, param=param@entry=0x2342) at gsm_subscriber.c:246
#4 0x080498f7 in main (argc=1, argv=0xbffff804) at channel_test.c:77
Breakpoint 3, subscr_paging_dispatch (hooknum=hooknum@entry=101, event=event@entry=200,
msg=msg@entry=0x1323, data=<optimized out>, data@entry=0x8063900 <s_conn>,
param=<optimized out>, param@entry=0xb5103cb0) at gsm_subscriber.c:126
126 llist_del(&request->entry);
(gdb) b llist_del
(gdb) bt
#0 subscr_paging_dispatch (hooknum=hooknum@entry=101, event=event@entry=200,
msg=msg@entry=0x1323, data=<optimized out>, data@entry=0x8063900 <s_conn>,
param=<optimized out>, param@entry=0xb5103cb0) at gsm_subscriber.c:126
#1 0x0804e8a9 in subscr_paging_cb (hooknum=101, event=200, msg=0x1323,
data=0x8063900 <s_conn>, param=0xb5103cb0) at gsm_subscriber.c:187
#2 0x080497e9 in paging_request (bts=0xb5b03e70, subscriber=subscriber@entry=0xb5103cb0,
type=2, cbfn=cbfn@entry=0x804e881 <subscr_paging_cb>, data=data@entry=0xb5103cb0)
at channel_test.c:51
#3 0x0804ea39 in subscr_send_paging_request (subscr=subscr@entry=0xb5103cb0)
at gsm_subscriber.c:207
#4 0x0804edac in subscr_get_channel (subscr=subscr@entry=0xb5103cb0, type=type@entry=2,
cbfn=cbfn@entry=0x804969d <subscr_cb>, param=param@entry=0x2342) at gsm_subscriber.c:246
#5 0x080498f7 in main (argc=1, argv=0xbffff804) at channel_test.c:77
(gdb) q
In ae1997248c the handwritten tokenizer
was replaced with strtok_r. As part of this change the structural
checking of MGCP parameters was stopped. This means that a code like
"line + 3" might access beyond the first NUL and be possibly behind
the msgb. Manually add size checking again. Manually jumping to the
error label is not possible anymore as it has been removed. The result
is that invalid lines will be skipped. This is matching the general
approach by the IETF RFCs to be permissive in data being received.
This patch adds the voice muxer. You can use this to batch RTP
traffic to reduce bandwidth comsuption. Basically, osmux transforms
RTP flows to a compact batch format, that is later on decompacted
to its original form. Port UDP/1984 is used for the muxer traffic
between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This
feature depends on libosmo-netif, which contains the osmux core
support.
Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using
the vendor-specific extension X-Osmux: on) coming from the BSC-NAT,
so you can selectively enable osmux per BSC from one the bsc-nat.cfg
file, so we have a centralized point to enable/disable osmux.
First thing you need to do is to accept requests to use Osmux,
this can be done from VTY interface of osmo-bsc_nat and
osmo-bsc_mgcp by adding the following line:
mgcp
...
osmux on
osmux batch-factor 4
This just initializes the osmux engine. You still have to specify
what BSC uses osmux from osmo-bsc_nat configuration file:
...
bsc 1
osmux on
bsc 2
...
bsc 3
osmux on
In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does
not have osmux enabled.
Thus, you can selectively enable osmux depending on the BSC, and
we have a centralized point for configuration from the bsc-nat to
enable osmux on demand, as suggested by Holger.
At this moment, this patch contains heavy debug logging for each
RTP packet that can be removed later to save cycles.
The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that
is received to configure an endpoint.
In rtcp_sdes_cname_mangle when skipping over additional zeroes at the
end of a chunk we should not read past the actual message (rtcp_end).
Fixes CID #1206579
I'm not entirely sure if this is the best approach. However,
there are phones that send a RACH request for TCH/F on MO calls, even
though they actually do support TCH/H channels.
When forwarding AMR from RTP towards the MNCC interface, we need to set
the apropriate msg_type. Before this patch it was unitialized,
resulting in improper/unknown msg_types of messages on the MNCC
interface.
AMR frames on the MNCC interface are slightly different as they
include a single-byte payload_length indicator prior to the actual
payload. Commit 3f201ac89952b68d05c0bb6cb41932b9cd898b19 introduced
more special-case handling than required, so I'm trying to simplify
things again.
We now also use msgb_put() more consistently, i.e. always put
before actually using the data, and use the return value of msgb_put()
rather than first making assumptions about the pointer, writing to it
and then calling msgb_put().
This has been pointed out by Jacob and removes two more duplicates
of the struct. For the unused CTRL_CMD_DEFINE_STRING macro there
will be no verify command.
Currently, if a CTRL method does not set the reply, an error is
logged ("cmd->reply has not been set"). It even complains when the
function implementing the command returns CTRL_CMD_HANDLED, where
a reply text is not needed.
This patch changes the logging level from ERROR to NOTICE. The logging
is now only done, when the retry has not been set and the
implementation returns either CTRL_CMD_ERROR or CTRL_CMD_REPLY. So
in these cases the reply field must be set.
This fixes the generation of log messages when doing NAT ctrl command
forwarding.
Ticket: OW#1177
Sponsored-by: On-Waves ehf
This adds a --frame-size option to read payload binary files with a
fixed frame size directly. The file must not contain RTP headers.
In addition '--rate' and '--duration' can be used to configure the
timing.
Sponsored-by: On-Waves ehf
FreeBSD uses POSIX netinet/in.h for representing socket addresses
data types.
[Holger removed the #ifdef and changed the order of includes to
have specific ones first and system includes later]
The code in the BSC/NAT called ipaccess_rcvmsg_base without
checking if the protocol is IPA. This lead the BSC to respond
to SCCP messages with an "ID ACK". From a quick look neither
the code of ipaccess_rcvmsg_base in OpenBSC nor the copy of
libosmo-abis ever checked the protocol header. So this code
has been wrong since initially being created in 2010.
The sender_id is gone so the code that attempted to delete SMS
didn't work anymore. Delete the SMS based on src_addr or the
dest_addr.
Fixes:
======================================================================
ERROR: testSubscriberAddRemove (__main__.TestCtrlNITB)
----------------------------------------------------------------------
Traceback (most recent call last):
File "tests/ctrl_test_runner.py", line 379, in testSubscriberAddRemove
r = self.do_set('subscriber-delete-v1', '2620345')
File "tests/ctrl_test_runner.py", line 114, in do_set
return self.recv_msgs()[id]
KeyError: 1002
This is mostly based on Alexander's migration code. The code
adds transaction handling and some sanity checks and cleanups
to the code. We made the decision to fork the sms_from_result
method and freeze it to that version. This way sms_from_result
can move forward without having to deal with legacy.
That was a bad idea from the very beginning. A visible result of this is a wrong
SMS routing when you change subscriber extensions, while having queued SMS. It's
also a very wrong thing from the code layering perspective.
I think the next logical step should be to remove "receiver" pointer from
the gsm_sms structure into a structure, special for the internal SMS queue.
This is an incompatible database schema change. Store the type of
the address in the database for both the sender and the receiver.
Currently it is possible to use SMPP to store a SMS and the NPI
and TON will be lost on the delivery of the SMS. The schema is
changed to make the delivery always use the right NPI/TON. This
patch is not ready for the master branch as there is no upgrade
path for the HLR yet.
Use memcpy to copy from the OML message into the stack and then
convert the network byte order.
network_listen.c: In function ‘test_rep’:
network_listen.c:145:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
test_rep_len = ntohs(*(uint16_t *) &foh->data[3]);
^
network_listen.c:153:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
ferr_list_len = ntohs(*(uint16_t *) &foh->data[7]);
^
network_listen.c:164:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
ferr_list_len = ntohs(*(uint16_t *) &foh->data[7]);
^
network_listen.c:130:11: warning: variable ‘test_rep_len’ set but not used [-Wunused-but-set-variable]
uint16_t test_rep_len, ferr_list_len;
sgsn_main.c: In function ‘main’:
sgsn_main.c:345:2: warning: implicit declaration of function ‘gprs_sndcp_vty_init’ [-Wimplicit-function-declaration]
gprs_sndcp_vty_init();
^
sgsn_main.c:354:2: warning: implicit declaration of function ‘sgsn_gtp_init’ [-Wimplicit-function-declaration]
rc = sgsn_gtp_init(&sgsn_inst);
^
CC gprs_sndcp_vty.o
gprs_sndcp_vty.c: In function ‘vty_dump_sne’:
gprs_sndcp_vty.c:46:15: warning: unused variable ‘i’ [-Wunused-variable]
unsigned int i;
CC sgsn_libgtp.o
sgsn_libgtp.c: In function ‘create_pdp_conf’:
sgsn_libgtp.c:262:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
sgsn_libgtp.c: In function ‘cb_data_ind’:
sgsn_libgtp.c:432:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
CC gprs_llc.o
gprs_llc.c: In function ‘t200_expired’:
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_UNASSIGNED’ not handled in switch [-Wswitch]
switch (lle->state) {
^
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_ASSIGNED_ADM’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_REMOTE_EST’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_ABM’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_TIMER_REC’ not handled in switch [-Wswitch]
gprs_llc.c: In function ‘gprs_llc_hdr_rx’:
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_NULL’ not handled in switch [-Wswitch]
switch (gph->cmd) {
^
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_RR’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_ACK’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_RNR’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_SACK’ not handled in switch [-Wswitch]
gprs_llc.c: In function ‘gprs_llc_rcvmsg’:
gprs_llc.c:791:23: warning: unused variable ‘udh’ [-Wunused-variable]
struct bssgp_ud_hdr *udh = (struct bssgp_ud_hdr *) msgb_bssgph(msg);
^
gprs_llc.c: At top level:
gprs_llc.c:311:13: warning: ‘t200_expired’ defined but not used [-Wunused-function]
static void t200_expired(void *data)
^
gprs_llc.c:337:13: warning: ‘t201_expired’ defined but not used [-Wunused-function]
static void t201_expired(void *data)
CC gprs_sndcp.o
gprs_sndcp.c: In function ‘defrag_input’:
gprs_sndcp.c:188:25: warning: variable ‘scomph’ set but not used [-Wunused-but-set-variable]
struct sndcp_comp_hdr *scomph = NULL;
^
gprs_sndcp.c: In function ‘sndcp_llunitdata_ind’:
gprs_sndcp.c:512:11: warning: variable ‘npdu_num’ set but not used [-Wunused-but-set-variable]
uint16_t npdu_num;
^
gprs_sndcp.c: At top level:
gprs_sndcp.c:565:12: warning: ‘sndcp_ll_reset_ind’ defined but not used [-Wunused-function]
static int sndcp_ll_reset_ind(struct gprs_sndcp_entity *se)
^
gprs_sndcp.c:573:12: warning: ‘sndcp_ll_status_ind’ defined but not used [-Wunused-function]
static int sndcp_ll_status_ind()
^
CC gprs_gmm.o
gprs_gmm.c: In function ‘gsm48_tx_gmm_att_ack’:
gprs_gmm.c:350:11: warning: unused variable ‘ptsig’ [-Wunused-variable]
uint8_t *ptsig, *mid;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_auth_ciph_resp’:
gprs_gmm.c:524:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_att_req’:
gprs_gmm.c:703:9: warning: implicit declaration of function ‘sgsn_acl_lookup’ [-Wimplicit-function-declaration]
!sgsn_acl_lookup(mi_string))) {
^
gprs_gmm.c:632:40: warning: variable ‘old_ra_info’ set but not used [-Wunused-but-set-variable]
uint8_t *cur = gh->data, *msnc, *mi, *old_ra_info, *ms_ra_acc_cap;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_ra_upd_req’:
gprs_gmm.c:915:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c:910:11: warning: variable ‘ms_ra_acc_cap’ set but not used [-Wunused-but-set-variable]
uint8_t *ms_ra_acc_cap;
^
gprs_gmm.c: At top level:
gprs_gmm.c:458:12: warning: ‘gsm48_tx_gmm_auth_ciph_req’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_req(struct sgsn_mm_ctx *mm, uint8_t *rand,
^
gprs_gmm.c:501:12: warning: ‘gsm48_tx_gmm_auth_ciph_rej’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_rej(struct sgsn_mm_ctx *mm)
^
gprs_gmm.c:1169:13: warning: ‘msgb_put_pdp_addr_ipv4’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ipv4(struct msgb *msg, uint32_t ipaddr)
^
gprs_gmm.c:1180:13: warning: ‘msgb_put_pdp_addr_ppp’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ppp(struct msgb *msg)
Given that the method is only called for a traffic channels the
missing breaks didn't hurt.
Fixes: Coverity CID 1040731, CID 1040732, CID 1040733,
CID 1040734
In case ftell -1 will be returned. Coverity complained that the
pos we pass to fseek might be negative. In case the ftell fails
we are at the last line for sure.
Fixes: Coverity CID 1040721
Coverity complains about checking connection->cfg in
bsc_close_connection() at one place but not at the second.
This patch fixes this by adding a check before accessing cfg when
generating the 'partial message' log message.
Fixes: Coverity CID 1195180
Sponsored-by: On-Waves ehf
The log message lacked a lot of context. A SCCP connection is
created on behalf of a configured BSC. This way we should be
able to always list this information.
The old ipa_msg_recv() implementation didn't support partial receive,
so IPA connections got disconnected when this happened.
This patch adds the handling of the temporary message buffers and uses
ipa_msg_recv_buffered().
It has been successfully tested by jerlbeck with osmo-nitb and
osmo-bsc.
Ticket: OW#768
Sponsored-by: On-Waves ehf
In case the max_power_reduction changes, issue a new Set Radio
Carrier Attributes command. OML 12.21 allows to not include the
ARFCN list and the semantic I picked/understand is that a partial
update is possible.
Fixes: SYS#267
Add the control interface with no hierachy right now and implement
the first command to list IMSI + Context Address of active sessions.
sgsn_cmd_handle could share more code with bsc variant.
Fixes: SYS#264, SYS#265
For GPRS the look-up via bts/trx does not make any sense and would
introduce bad depdencies for the SGSN. Move the look-up code to a
new file and introduce new setup methods.
Sadly there is no proper foreign key relationship on the tables
that related to the Subscriber. This means we can't use a DELETE
with Cascade and need to delete everything by hand. To make things
worse maybe the SMS/Paging code is still using the subscriber
making the operation more dangerous. I had added NULL checks for
sender_id/receiver_id at 30C3 so we should not crash in this
situation.
Fixes: SYS#274
The test has been manually verified. Executing the select for
the subscribers showed:
sqlite> select * from Subscriber;
1|2014-03-23 12:12:46|2014-03-23 12:19:09|2620345||445567|1||0|
This created a subscriber with the right IMSI, MSISDN and has
it authorized.
Fixes: SYS#275
The new definitions are: half rate and AMR
Change of definition name for bad frame, because it applies to all types of
traffic, not only TCH/F.
Increase MNCC interface version to 4. Version 3 is skipped, because it was
used by older version of Linux-Call-Router which is incompatible with the
current version of the MNCC interface.
Daniel Willmann
Harald Welte
Daniel Willmann