This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
during attachment, the "tmsi" field of the subscriber may be an empty
string, so the string must be quoted in the sql request, or the sql
request fails due to incorrect syntax.
also i added "extension" field to debug output.
Introduce the internal gsm0408_authorize that will determine
if we allow the user into our network. If allowed a new tmsi
will be allocated, the subscr_update will be called, the loc_operation
released, and the accept sent. Otherwise just return 0.
The code was copied from mm_rx_id_resp.
If location update is requested, but subscriber is not yet authorised
within mm_rx_loc_upd_req() function, the subscr_update() is not called,
because subscriber information is not complete.
During mm_rx_id_resp() the subscriber informations is may be complete,
so authorize subscriber succeeds and database must be updated.
this small tool is used to enable layer 1 and 2 on a given isdn card.
the card can be used to retrieve clock signal from a network. layer 2
(PTP) is required to keep layer 1 without interruption. this tool works
on e1 and s0 cards. to use the clock signal with other cards,
interconnection with a clock-slave-card is required.
(Andreas Eversberg)
Do not allow two location updating requests on the same lchan. Such
an event is certainly spoofed and can confuse the internal logic of
the application. Prevent that.
The abnormal case is that lchan_free ist getting called due
a RSL_MT_CHAN_REL_ACK in the RSL but the refcount of this
channel is not zero. This means that some "logical operation"
is still going on that needs to be cancelled.
Instead of always queuing up all operations in the
struct gsm_lchan use the signal framework to inform higher
layers about this abnormal case.
In gsm_04_08.c a signal handler is installed and in the
abnormal case the location updating request operation is
freed.
This was a stupid decision. We will have to assign the
network at some other place. The problem will be a problem
when we have two gsm_networks in one process and the same
subscriber is traveling in both networks.
The pointer was initially added to support to open a lchan
by using the gsm_subscriber structure. We would have restored
the struct gsm_bts from the db when loading the subscriber.
Instead we will dynamically resolve the gsm_bts and might end
up paging multiple bts in the same (stored/old) location area
until it answers.
It will define -DVTY_CRYPT_PW= if crypt is found. If -lcrypt is
needed, $(LIB_CRYPT) will be -lcrypt.
Compiles on OS X and Linux and reenables crypt.
Patch by: Lars Immisch
Tells mISDN not to release layer 2 on closing socket, when not
requested. If mISDN was told to release layer 2 once, it will continue
to release layer 2 on every shutdown of OpenBSC.
During bootstrap of BS11, the e1links are initialized. This must also be
done when BS11 is already bootstrapped (when restarting OpenBSC). It is
required to correctly multiplex the audio traffic between channels.
Without it, all time slots refer to card 0, slot 0, subslot 0, which
causes crashes when handling TRAU frames..
This patch will fix subscriber usage countinig.
It may happen, that the subscriber count will not be 0 after releasing
of a call. (This problem is solved with the application patch (27),
which will replace static call transaction by a dynamic transaction
list, and use subscriber for each transaction created.)
* add nm_state objects for RACK and CCLK
* add obj_class human-readable printing for all vendor obj_classes
* add human-readable printing of administrative state
* add enum for cell_alloc numbers
A new function trau_recv_lchan() is used to link a channel to a call reference
of a transaction. (Transactions are used in later patches.) TRAU frames will
then be forwarded to the application with the given call reference (in later
patches). Also the application can send TRAU frames by using trau_send_lchan().
A new list is introduced in trau_mux.c. (upqueue_entry) All subslots
that must be sent to application are listed here.
Received TRAU frames are written in the upqueue of application
interface, if a call reference is found in the upqueue-list. If an entry
is found the ss_entry list, the TRAU frames are bridged as before. The
frames have a message type (msg_type), a call reference (callref) and a
trau frame (data). The length of trau frame is defined by the content of
the c-bits inside the frame.
There is no support for ip.access yet, as they don't use the traditional
TRAU frame format. Harald must add this in order to use application interface
with ip-access. The bridging with ip-access works as before.
(Andreas Eversberg)
no IE type included in the message. These information elements are
mandatory, so their actual IE type is known. The improved parse_tlv()
function allows to parse zero, one, or two length-value elements.
(Andreas Eversberg)
is used for the E1's time slot. This timer replaces the "usleep()"
function, so the process will not block the execution of libbsc. The
timer is started after a frame is transmitted. If another frame is in
the transmit queue, the frame will only be queued until the timer times
out. If the timer is not running or times out, the frame is transmitted
and the timer is restarted.
The problem with partly provisioned TRX (locks show on LMT) is solved.
The adjustment for the inter frame delay of 50 miliseconds is for
further study.
(Andreas Eversberg)
select function ob libbsc. A "polling" flag is used to enable polling.
In this case select() will not sleep until file descriptor events occurr
or nearest timer expires. Also a return value will indicate if there was
an event that has been handled. If there was an event, the application
decides to poll again and don't wait.
In case for bsc_hack, the polling flag is not set. select will sleep as
usual.
(Andreas Eversberg)
Neels Hofmeyr
Harald Welte