The VTY handover_vtc.c offers a large number of handover specific
settings. Those settings are (with one exception) auto generated using
macros. Lets add an equivalent for the control interface that uses the
same auto generation mechanisms.
Change-Id: I12f143906818fd6b16e8783157cbb1eb51e49ffc
Depends: libosmocore I53fc207677f52b1dc748b01d58424839cdba807c
Related: SYS#5369
The tx TRAP callback is triggered through a signal which is never sent in
osmo-bsc code, and never was as far as I can tell going quite far in the
logs.
In the meanwhile, the msc_connection_status was left in favour of
multi-msc msc.X.connection_status CTRL variable, so let's prepre the cb
function to work for that onei too, dropping global variables which may lead
to wrong output in multi-msc environments, and simply use msc->nr==0 for
the old variable "msc_connection_status".
The signal is now triggered in a_reset when the A conn becomes connected
or disconnected. As a result, a user waiting for the disconnect event
may notice that the status may be changed with a noticeable delay, since
the A conn may be reset only due to high layer timeouts after several
repeated failures (T4, BAD_CONNECTION_THRESOLD).
Related: OS#2623
Related: OS#4701
Related: SYS#5046
Change-Id: I645d198e8e1acd0aba09d05cb3ae90443946acf8
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
The separate struct osmo_bsc_data is like another separate struct gsm_network
for no reason. It is labeled "per-BSC data". These days, all of this is a
single BSC and there will not be different sets of osmo_bsc_data.
Drop struct osmo_bsc_data, move its members directly into gsm_network.
Some places tested 'if (net->bsc_data)', which is always true. Modify those
cases to rather do checks like 'if (net->rf_ctrl)', which are also always true
AFAICT, to keep as much unmodified logic as possible in this patch.
Change-Id: Ic7ae65e3b36e6e4b279eb01ad594f1226b5929e0
The BSC is the wrong network component to originate USSD messaging, as can be
seen in the hacks in the USSD code: for example, the BSC would send a CM
Service Accept message as if an MSC had accepted the connection, dispatch a
USSD and directly send some RR release message (without proper tear down
messaging like the lchan_fsm does these days). This made sense in the osmo-nitb
world, but by now we are aiming for solid 3GPP compliance. The BSC shall not
originate USSD messages.
Deprecate all VTY and CTRL commands related to USSD:
VTY
[no] bsc-welcome-text
[no] bsc-msc-lost-text
[no] bsc-grace-text
[no] missing-msc-text
(the commands with 'no' are ignored, without 'no' lead to an error)
CTRL
ussd-notify-v1
Drop (already unused) ussd.h.
Drop gsm_04_80.h, gsm_04_80_utils.c, and all calling code.
Drop "RF grace" notification, where osmo-bsc was able to notify active
subscribers that the RF was being turned off.
Change-Id: Iaef6f2e01b4dbf2bff0a0bb50d6851f50ae79f6a
Old osmo-bsc-sccplite already supported this, but in the migration
over to libosmo-sigtran and to real 3GPP AoIP, this functionality
got lost.
We now create a UDP proxy socket. Any MGCP commands received via IPA
from MSC (or rather: bsc_nat) are retransmitted to the MGW via UDP on
this socket. Any responses back from the MGW received on the UDP
socket are retransmitted back to MSC/bsc_nat as MGCP inside the IPA
multiplex.
Closes: OS#2536
Change-Id: I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
Coverity points out that conditional checks in set_net_timezone()
depend on each other: The value of 'override' depends on 'hourstr'
being non-NULL. Nest these conditional checks such that this
dependency becomes obvious.
No functional change.
Change-Id: I10dece1e1d9e039fb9f03be89b3a202cb077b026
Related: CID#148208
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
It's not a good idea to keep extern declarations copied over
half a dozen C files. Let's move it to a header.
Change-Id: I6f643f1393ba0955d9c0cf1cf78d5c604e7b9451
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
There was always a 1:1 correspondence between gsm_subscriber_connection
and osmo_bsc_sccp_con, so there's really no point in having two separate
dynamically allocated data structures with pointers back and forth and
another linked list around.
Let's merge osmo_bsc_sccp_con into gsm_subscriber_connection for
simplicity.
The resulting code might not be elegant in places, but I've tried to
do only the most simple changes in this patch, while further
simplifications can be done in later subsequent patches.
As a side-effect, this patch also fixes lchan clearing if the MSC
(or the local SCCP provider) hard-disconnects the SCCP connection.
Change-Id: Idd2b733477ee90d24dec369755a00f1c39c93f39
Add a new control command 'msc.N.connection_status' which can be used
to query the connection status of a particular MSC with number N.
Keep the old control command 'msc_connection_status', which always
queries MSC 0, for backwards compatibility.
Change-Id: Ibd41474a1be80e782b19ec337c856b5efc593fa8
Related: OS#2729
Since 39f62bbcbf the msc_connection_status
variable in osmo_bsc_ctrl.c is no longer updated. Query the connection's
status from the is_connected flag in struct bsc_msc_connection instead.
Makes test BSC_Tests.TC_ctrl_msc_connection_status in ttcn3-bsc-test pass.
However, we only query the connection status of the first MSC. Adapting
the control command to work with mulitple MSCs is left for future work.
Change-Id: I8ab8aac83ef6b7831b6136f7e9e3eddfbb43ecaa
Related: OS#2729
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Philipp Maier
Pau Espin
Neels Hofmeyr
Harald Welte