This adds the vty commands and respective logic to allow the user to
specify the NCH (notification channel) position in the SI1 rests octets.
Change-Id: Iefde0af44a663f22462a54d68a58caa560eceb2f
Related: OS#5781
Requires: libosmocore.git I24a0095ac6eee0197f9d9ef9895c7795df6cdc49
The PCUIF interface implementation in osmo-bsc provides two ways to
access the paging channel (PCH).
1) Under the SAPI PCU_IF_SAPI_PCH PAGING COMMAND messages are accepted
as whole MAC block but the format is in the style that we are going
to deprecate with PCUIF v.11. Also at the moment those PAGING COMMANDs
are not confirmed towards the PCU. This is also not necessary since
osmo-pcu would silently drop such confirmations. (see pcu_rx_data_cnf
in pcu_l1_if.cpp)
2) Under the SAPI PCU_IF_SAPI_PCH_DT messages are also accepded as
MAC blocks but the SAPI will only accept IMMEDIATE ASSIGNMENT messages.
The messages are encapsulated in a struct that holds IMSI (paging group)
and TLLI (used for confirmation) as separate struct members. The
messages are also confirmed towards the PCU as it should be.
Since we want to depreacete the older V.10 version of PCUIF and there is
not much benefit in maintaining two interfaces we should use
SAPI PCU_IF_SAPI_PCH_DT for both message types. This also requires small
adjustments to osmo-pcu (see Depends).
Depends: osmo-pcu.git I99cfe373fa157cfb32b74c113ad9935347653a71
Related: OS#5927
Change-Id: I82443f2b402aa2416469c8c50b1c050323ef3b8f
This function is used to check if the BTS is using the IPA Abis-IP
transport, and not whether its manufacturer/vendor is ip.access.
Let's use a less confusing name.
Change-Id: I202c58341c1536489064d2671c0842c6f70b5429
Use the proper type that can handle the entire range of MSC numbers we
allow on the VTY, we have:
#define MSC_NR_RANGE "<0-1000>"
Before this patch, MSC pool round robin would glitch around for any
'msc' numbers 'msc 256' thru 'msc 1000'.
Change-Id: I98bee022c1a78508554d2ff4a10fbce3c53f1128
If power saving is enabled for a BTS, it should remain enabled even
if the BTS is restarted for whatever reason. This persistence can be
achieved by re-sending the configured power reduction value whenever
the BTS NM FSM enters the ENABLED state again (i.e. reconnects).
Separate gsm_bts_send_c0_power_red() from gsm_bts_set_c0_power_red()
and call the former from st_op_enabled_on_enter(). All we need to do
is to send the value that was configured before, per-timeslot power
reduction limits remain and need not to be updated.
Take a chance to move logging from BTS specific to the generic code.
Change-Id: Ic3f8a2ab0ffd049a8ed84361a3a588c1e1b23ac6
Related: SYS#6435
The signal is already there but not being used.
Let's further split generic paging code from RSL specificites.
Change-Id: Iabc1c29908a5136501d6dc6e60f8777dab511b86
The co-located PCU support for Ericsson RBS E1 CCU made it necessary to
add new features to the PCU socket interface, so let's increase the
version number.
Change-Id: I8315bd67c7f3eb0d7ee71b64cd4dff889a84fcf1
Depends: osmo-pcu.git I2a78651593323e8b9627c39918d949a33497b70f
Related: OS#5198
The current PCU implementation has never been tested with multiple BTS
attached to it. This is due to the fact that it has been used
exclusively in an BTS co-located setup where naturally only one BTS is
present. The PCU sock protocol supports multiple BTSs in theory and we
should handle this correctly.
Related: OS#5198
Change-Id: I0b42c2c130106f6ffca2dd08d079e1a7bda41f0b
The flag PCU_IF_FLAG_DT is no longer needed. The PCU implementation will
distinguish by the version number instead.
Change-Id: I0dc20e351deb14906b2edffc39499bad9659cc35
Related: OS#5198
At the momemnt we use is_ericsson_bts() to check if the BTS uses a BSC
co-located PCU, this is a bit ambiguous, lets have a function that
explicitly checks for a BSC co-located PCU and nothing else.
Change-Id: I23ed4219e5ebd188867c17f387ca877efa9bc3b0
Related: OS#5198
The check functions that we use to distinguish between the various types
of BTSs return an integer that can be 0 or 1. Let's change the return
type to bool
Change-Id: I3de957f228452c9d3aa4fed342f73bfb17363b40
In osmo-bsc, there's currently 0..1 Lb links and 0..N A links, where N
is the number of MSC, but links can be shared in the underlaying stack
(struct osmo_sccp_instance), hence range 0..N of different
osmo_sccp_instance (identified by PC).
Even more, the Lb and A link can share the same underlaying stack, so
osmo-bsc can end up with only 1 struct osmo_sccp_instance shared by all
the above mentioned links in case all are configured under the same PC.
Total range A+Lb is 0..(1+N).
A struct gsm_subscriber_conn stores 2 struct sccp_instance*, one for
Lb (conn->lcs.lb.*)and one for A (conn->sccp.*).
They can actually point to the same sccp_instance or to different ones,
as explained above, depending on the configured setup. In any case, a
gsm_subscriber_conn needs 2 rb_nodes since it can hold
any of the 2 conn_ids independently (A or Lb).
The previous patch forgot to add that 2nd rb_node as well as some
initialization and release code for the Lb conn. This patch addresses
that.
When the 2nd rb_node, a problem when iterating the rbtree appears: how to
find out the "conn" pointer from the rb_node pointer, since the rb_node pointer
can be any of the 2 rb_nodes inside the struct at a different offsets.
In order to solve that problem, a new struct bscp_sccp_conn_node is
added, which holds all the relevant information used by the rbtree lookup code
in a generic way (rb_node and conn_id), plus a backpointer to the struct
bsc_gsm_subcriber it relates too.
Fixes: 85062ccad3
Change-Id: If42d93adee71d646766929a09bc01ae92b734ef3
It was found that on a busy osmo-bsc process (>1000 concurrent calls
spead over different BTSs), a good amount of time is spent iterating the
subscribers list trying to find a subscriber based on a TMSI (1.60% of
total CPU time used by osmo-bsc).
This patch introduces a new rbtree under struct bsc_subscr_store which
allows storing all the busbs ordered by TMSI.
This way, lookup time changes O(N) -> O(log(N)), at the expense of
increased insert/deletion time O(1) -> O(log(N)).
Related: SYS#6200
Change-Id: If27429e715ef4b327177e427249e68321a6e83cc
This allows keeping the bsc_subscriber storage internals outside of main
gsm_network code, while easily allowing making the internal
implementation more complex (in order to optimize it in a follow-up
commit).
It is also nice since we get rid of uncommon procedures being used in
this code, like allocating an llist directly as a talloc context, etc.
Change-Id: I616e8872af4ac63a6985f8900909e324ba889192
The function was currently in osmo_bsc_sigtran.c but was never used
there, and it really doesn't have any relation to that file.
Let's move it to the only place where it's used so far, and mark it as
static.
Change-Id: I8a8cef45aa378421e0ac328d3b29b9d194698a55
It was found that, on a busy osmo-bsc (>1000 concurrent calls spread over
several BTS), the CPU consumption looking up for gsm_subscriber_conn
based on SCCP conn_id can take a considerable amount of time (>5% of
osmo-bsc already taking 70% of the CPU time on the core it is running on).
The huge CPU consumption happens because a linear search is done (llist)
over the entire list of SCCP connections every time an SCCP message is
handled.
In order to optimize this lookup, this patch introduces a new struct
bsc_sccp_inst which becomes associated to the libosmo-sccp
osmo_sccp_instance. Each of this strucs maintains an rbtree of
gsm_subscriber_conn ordered by conn_id.
As a result algorithmic complexity adds O(log(N)) during insert, lookup
and delete of SCCP conns, but gets rid of O(N) previous lookup.
As a plus, finding a new conn_id now takes generally O(log(N)), while
before it used to take O(N).
Related: SYS#6200
Change-Id: I667d3ec1dad0ab7bc0fa4799d9611f3a914d07e5
The 0x00FFFFFF source local reference is reserved in M3UA/SCCP, hence
avoid allocating a conn_id with that value since later on when reused as
a source local reference it would fail to be encoded.
Change-Id: I5c62bbfa89140d754edccb4404503cb70d5fde89
Currently, the conn_id is allocated in a range 0..0xffffff by
bsc_sccp_inst_next_conn_id(), and -1 means it is unset.
This means allocation expects "int" to be at least 32 bits integer,
in order to fit 24 bits for 0..0xffffff plus the -1.
Hence, let's define the variable as uint32_t, as already done in
libosmo-sccp. Use last value 0xFFFFFFFF ((uint32_t)-1) and avoid playing
with the value being unsigned sometimes and signed only for "unset"
value.
The value is actually already handled as unsigned (printed with %u) in
most places.
Change-Id: If019bcbc1e28929fe8d981fef9103835fc6ead2e
When the IMMEDIATE ASSIGNMENT is sent from the PCU to the BSC using the
"direct TLLI" method, the TLLI (and the last three digits of the IMSI)
is prepended to the MAC block. Currently we are taking the fields apart
manually using offsets. The code for this is difficult to read and the
method is error prone. Let's define a struct that we can just overlay
to access the fields directly. Let's also transfer the full IMSI.
Change-Id: Id6acbd243adf26169e5e8319dd66bb68dd6a3c22
Related: OS#5198
When the PCU is disconnected while the BSC keeps running the PDCH should
be closed. Also the PDCH should be reopened when the PCU is
reconnected.
Change-Id: I9ea0c53a5e68a51c781ef43bae71f947cdb95678
Related: OS#5198
Use the full gsm0808_chan_indicator value throughout the lchan related
structs (assignment_fsm_data, gsm_lchan, lchan_activate_info,
lchan_modify_info) instead of reducing it to the boolean
requires_voice_stream.
This is needed so we don't lose the information whether an lchan was
requested for data or speech (both need an rtp stream).
Add a new bsc_chan_ind_requires_rtp_stream function and use it in
conditionals like the previous requires_voice_stream.
Related: OS#4393
Change-Id: I1538c1e6d5cd61559af7c1e2860afd0269dda367
Replace check_requires_voice_stream, which used to iterate over
ch_mode_rate_list and verify that all entries are either for speech or
signalling. Instead verify in check_chan_mode_rate_against_ch_indctr,
that all entries of ch_mode_rate_list have a chan_mode that matches the
ch_indctr (data, speech, signalling; called "speech / data indicator" in
3GPP TS 48.008 § 3.2.2.11).
This ensures that all of them are either data, speech or signalling and
not mixed.
Related: OS#4393
Change-Id: Iee5cbfee84d7f2ad59ee2d5a19891a2b59bbafff
Handle assignment requests for CSD. In this initial version, the code
for non-transparent data mode is a stub.
Related: OS#5763
Depends: libosmocore Ia965cdd9f53af756e5ffaff9b8f389b5ad629969
Change-Id: I350bea15fd2158eb6edc9bc92f2dca48930736e9
It looks like the idea was to translate the CSD rate from BSSAP to
lchan_csd_mode before translating it to RSL. But instead we can just
directly translate the BSSAP value to the RSL value.
The previous code was not used yet (nothing wrote to csd_mode).
Related: OS#4393
Depends: libosmocore I25bfd02aa1428a35492b20376a31635a442e545f
Change-Id: Ice914744da3a2084e82d125848fb69404b8e8a36
gsm_pchan_ids[] exists only to compose osmo_fsm compliant IDs. We do
have osmo_fsm_inst_update_id_f_sanitize() now, rather use that.
This removes some confusion about which value_string array has an effect
on the VTY command 'ts' / 'phys_chan_config'.
Note that tests/bsc_test.ok does not change, hence the new way of
composing FSM IDs is identical to using the old gsm_pchan_ids[].
Change-Id: Ib85b7aa4ea882ae37919dd3ea0c033e949c083e5
Show the timeslot_fsm, lchan_fsm, assignment_fsm fi->id strings.
The IDs include the current pchan configuration. I want to tweak the
composition of these in an upcoming patch, so the test should show
whether any FSM IDs change from that.
Change-Id: If369f23fa140b9d7792f5a511815cbbd14b371e9
I'm going to add a regression test that probes lchan_fsm. I noticed that
I have to call lchan_fsm_init() for osmo_fsm_register(). Let's make this
implicit as we usually do now, to not have to register FSMs in tests.
Change-Id: I58760e743c78a370aedc9720f265c0f8da5c2045
We have some macros that may at times have signed arguments, and at
other times unsigned. Checking for <= 0 is not a bug in this case.
Let's typecast any unsigned arguments to signed int to work around.
Change-Id: I10e60b20c6f8092cf1ce09ebe501e739fd4a9479
Closes: CID#272993, CID#272992 (and many others)
osmo-bsc requires the PCU to tag IMMEDIATE ASSIGNMENTS that shall be
sent via PCU with a TLLI. This is required to confirm the sending of the
IMMEDIATE ASSIGNMENT messages to the PCU.
Related: OS#5198
Change-Id: Ib804143a57824632e5435f7ba68f2e94f5f3fb21
The IMMEDIATE ASSIGNMENT for downlink TBFs needs to be sent through the
PCH instead of the AGCH. Since this method is not specified in RSL, it
is usually a vendor specific extension.
Change-Id: I4452f4973d1ec69c96aad527b057226e8a6edf99
Related: OS#5198
The current name of PCU_IF_SAPI_AGCH_DT is a bit misleading as it
describes a method to send immediate assignment messages (normally AGCH)
via the PCH. The name in the constant should reflect that correctly
Change-Id: I78abeb62d0267baa31a4727c4bdd027b7230f137
Related: OS#5198
The struct gsm_pcu_if_e1_ccu_ind is a bit misplaced. Lets move it next
to the info indication strucht, to have it in the same order is it used
in gsm_pcu_if
Change-Id: I41237c7847ab7a14ed2cd85dd32aabb3a6124a49
Related: OS#5198
osmo-pcu will also support GPRS via E1 timeslots in a BSC co-located
setup. To avoid duplicate configuration the BSC has to communicate the
E1 parameters (which TS, SS etc.) to the PCU. Lets add a new primitive
to do that.
Change-Id: I3a0f6ae6b98694458230d7c0ac2c89b332cfbc92
Related: OS#5198
IMEI may be used as MobileIdentity during MO emergency call
establishment if the MS has no valid IMSI assigned.
Related: OS#5849
Change-Id: I586b1ee30cbb26ddf58788168d56c962e03ccd5c
Harald Welte
Philipp Maier
Vadim Yanitskiy
Max
Neels Hofmeyr
Pau Espin
Oliver Smith