l_bts must be declared outside the for-loop. If the loop is passed with
n_bts set the first time, l_bts is set. If the loop is passed with
n_bts set next time(s), l_bts is used to encode additional neighbor
cell infos.
Related: CID#330310 and CID#330311
Change-Id: I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c
There are still some remains that are related to the old PCUIF v10
protocol version. Let's clean those up.
Related: OS#5927
Depends: osmo-pcu.git I68a3f59d5c960ae3a4fbd74f9d4a894295cb9ed8
Change-Id: Iebb3a634fee680bdc3636a61f3ccaa1e97e54a64
For each BTS, an SI 10 is generated with the informations about all
neighbor BTS that have the same group/broadcast call.
The SI 10 will only define neighbor cells within the same BSC, because
it does not know about neighbor cells within other BSCs.
When multiple channels are used for a group/broadcast call, the SI 10
is generated after all channels have been activated. Subsequent channel
activations result in an update of SI 10 on all channels.
Change-Id: Icd3101e6dd935a57f003253aaef400c2cf95a0c3
The error logging message within this function is moved to the user
neigh_list_get_arfcn().
In case of an error, which results in measurement report with cell
index that does not exist in the list of neigbor cells, the measurement
report is truncated to 0 neighbor cell measurements.
Change-Id: Ia8a1dca4837536129d17e7784b892bcb75b9ca4b
System Information 2 (bis/ter) uses BA_IND of 0. This refers to
"neigh_list". System information 5 (bis/ter) uses BA_IND of 1. This may
refer to "neigh_list" or optionally "si5_neigh_list", depending on the
VTY settings.
If BA_IND of 1 is received in measurement report and if the optional
"si5_neigh_list" is used, this list is chosen to decode the measurement
report.
Change-Id: Ie9123928fb3ae6f10921ecf01d1b50330661da38
Before this patch, neighbor cells with ARFCN 955 to 974 were ignored in
the GSM 900 band. This resulted an empty 'bit map 0' list in SI2/SI5
messages.
This patch includes R-GSM ARFCN in range 955 to 974. A different encoding
is chosen, if neigboring cells fall within this range.
Change-Id: I40d024290fa4be2ba8d3149ec841b182d0cc8c1f
The PCUIF flag PCU_IF_FLAG_SYSMO was originally used by osmo-bts-sysmo
to signal to the PCU that the direct PHY access for the sysmo-bts DSP
should be enabled. With time, support for other BTS models was added and
the flag became a synonym for "direct PHY access", so it makes sense to
rename it to "PCU_IF_FLAG_DIRECT_PHY"
Related: OS#6191
Depends: osmo-pcu.git I29b7b78a3a91d062b9ea3cd72623d30618cd3f0b
Change-Id: I23df067df99b76048667131905c4448d32d80640
Before this patch, the MGW was selected at startup, and the MGCP data
was always forwarded to that same MGW.
If several MGW were configured in the MGW pool, then osmo-bsc would
select any of those from the pool, and start configured the BTS-side
connection on an endpoint in that MGW. However, when the MSC submitted
the MGCP encapsulated in IPA to the BSC, the BSC would always forward
the MGCP message to that same MGW selected at startup.
As a result, multiple MGWs configured with osmo-bsc using SCCPlite was
broken.
This commit fixes support for multiple MGWs by looking up the already
selected MGW (to setup the BTS-side conn on the endpoint), based on the
CIC (MGCP Endpoint) which was provided by the MSC upon AssignReq.
Related: OS#6189
Depends: libosmocore.git Change-Id Iee361d740845257fa62c9093e30e8079fa933827
Depends: osmo-mgw.git Change-Id I18d7bdf650c0ec87ae16ed4944aed9f495400137
Change-Id: Ia106a21b7692eb5b2ac3b5ac2b358bedbc3b9da6
The first byte is the default version, the other bytes describe the
optional other versions supported by the MO. Print them all.
Change-Id: I01da4883cf59101ddaef575979519ac48fcf54b0
Even though the Abis/OML message flow looks the way it should look
on the wire, it does not actually reflect the sequence/flow of events
and actions in the NM FSMs. For example (extracted from a PCAP):
GPRS Cell(00,00,ff) State Changed Event Report
GPRS Cell(00,00,ff) Software Activate Request
GPRS Cell(00,00,ff) Software Activate Request ACK
GPRS Cell(00,00,ff) Activate Software
GPRS Cell(00,00,ff) Activate Software ACK
[a] GPRS Cell(00,00,ff) State Changed Event Report
[b] GPRS Cell(00,00,ff) Software Activated Report
[c] GPRS Cell(00,00,ff) Get Attributes
GPRS Cell(00,00,ff) Get Attributes Response
[d] GPRS Cell(00,00,ff) IPA Set Attributes
GPRS Cell(00,00,ff) IPA Set Attributes ACK
GPRS Cell(00,00,ff) Change Administrative State
GPRS Cell(00,00,ff) Change Administrative State ACK
GPRS Cell(00,00,ff) State Changed Event Report
GPRS Cell(00,00,ff) Opstart
GPRS Cell(00,00,ff) Opstart ACK
A follow-up patch [1] changes the logic generating message [d],
so that the IPA Object Version of the GPRS Cell MO is taken into
account when adding the attributes.
The problem is that both messages [c] and [d] are generated and
queued for transmission on the receipt of message [a], but *before*
message [b] has been processed. So the IPA Object Version is not
known and assumed to be 0 at that point in time.
This patch delays configure_loop() until message [b] is received.
So far only for nanoBTS and only for those MOs, for which Figure 2
in 3GPP TS 52.021 explicitly mentions that the SW downloading and
activation procedures may be required, plus for the ip.access
specific MOs which all seem to support the SW activation.
osmo-bts does send SW Activated Report only for a subset of MOs,
which does not include Baseband Transceiver, Radio Carrier, and
Radio Channel. 3GPP TS 52.021 is not clear on whether this
message shall be sent by all MOs either, so we consider it
optional and delay configure_loop() only for nanoBTS.
Change-Id: I3953a5e41eb27165f9ff203cac7447ee9d311abf
Related: [1] Ie0fb3eaf76e1f70e5a19bb088e1674b7e553d32a
3GPP TS 52.021 does not strictly mandate that the SW Activated Report
can only be received in state DISABLED/OFFLINE. The only requirement
is that the software load procedure (if needed) and activation is to
be performed in this state.
The successful outcome of software activation procedure is indicated
by the BTS using the above-mentioned SW Activated Report message,
which may be received in ST_OP_DISABLED_{DEPENDENCY,OFFLINE} too.
The MO state changes are triggered by the State Changed Event Report
messages, and happen asynchronously with the software activation.
This patch fixes the following warnings seen with a nanoBTS:
NM_BTS_OP(bts2){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_GPRS_NSE_OP(nse2){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_GPRS_CELL_OP(gprs-cell2){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_GPRS_NSVC_OP(nsvc0){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_GPRS_NSVC_OP(nsvc1){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_BB_TRANSC_OP(bts2-trx0){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts0){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts1){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts2){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts3){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts4){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts5){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts6){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_CHAN_OP(bts2-trx0-ts7){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
NM_RCARRIER_OP(bts2-trx0){DISABLED_OFFLINE}: Event SW_ACT_REP not permitted
The following warning is still expected to show up though:
NM_BTS_SM_OP(bts_sm){ENABLED}: Event SW_ACT_REP not permitted
but is caused by a different problem, which is to be fixed later.
Change-Id: I00a423adcde5c34977f4c4dad920874687fa493c
These functions are called from a signal handler (SS_NM), and the
signal itself is sent from the generic OML logic whenever the
Software Activated Report is received from some BTS, which is not
necessarily a nanoBTS or osmo-bts.
It would be nice if we could check the BTS type once in the signal
handler, but the signal data is not always the same and depends on
the signal type, so unfortunately it's not possible.
Change-Id: I088ff75f2048e54e4bfd926a79c1dcf27b4fb3a4
Using bts->nr on the wire is wrong because:
* bts->nr is a BTS number in the BSC's config file,
* bts->bts_nr is a BTS number within the SITE-MANAGER MO.
The problem does not show up if there exists only one BTS node
in osmo-bsc.cfg. Otherwise, the Software Load and BTS Restart
procedures are broken for nanoBTS.
Change-Id: I99d9c72752e55c4553e2e9c60df5caa8343b7be0
This is a partial revert of commit [1], which defined a limit on the
number of attributes and SW Description IEs as a constant and added
a spec. reference. The problem is that there is no such limit in the
referenced 3GPP TS 52.021. The attributes and SW Description IEs are
using TL16V encoding, so there can be as many as the Length part can
represent. It's actually the limitation of our side, since we
allocate a buffer of fixed size on the stack for parsing.
* Remove the MAX_BTS_ATTR and confusing spec. reference.
* For the SW Description IEs, define SW_DESCR_MAX locally.
* For the attributes, define the buffer size in place.
Change-Id: Idd8b971d32cf0f7a910a664d921e644b7c32d831
Related: [1] 1ebf23b7fe "Prepare for BTS attribute reporting via OML"
Related: OS#4505
* Make it easier to append the attributes conditionally.
* Remove irrelevant comments about the order of attributes.
* Request NM_ATT_IPACC_SUPP_FEATURES from Abis/IP models only.
Change-Id: Ice5bddd51481a3ef9fcffd77a4c292ea211bf179
Related: OS#4505
Since change [1], among with the other attributes we started requesting
NM_ATT_IPACC_SUPP_FEATURES from the BTS. This patch adds the logic for
parsing the response (so far only printing supported features).
Change-Id: I64cffa0bdead3617cc169c83b0f6ddf74f0866a7
Related: [1] 43440e1fc5
Depends: libosmocore.git Ia4208e10d61843dd6ae77398f6624c918dc81ea4
Related: OS#4505
This commit prepares for adding handling of additional attributes.
The parse_attr_resp_info_attr() is already quite complex, so take
a chance to simplify it a bit.
Change-Id: Ia5919a8311cd6a7fc16d02d2196276881e96f4c5
Related: OS#4505
This code is unreachable, because this file is all about Siemens BS11.
Take a chance to remove redundant BTS type check in nm_reconfig_bts().
Change-Id: I2db92fe448b1f4cd25c1e5c6e1bb9593795c9cb2
Related: OS#4505
This way it becomes a lot clearer what kind of content is expected to be
transmitted over the wire.
It is expected that in the future the nowadays hardcoded values will be fed
into struct abis_nm_ipacc_att_ns_cfg come from osmo_tdef, etc.
Change-Id: I4b4dfac9fd36378b20889fb90135be74f8968d5f
Depends: libosmocore.git Change-Id I60e17dedd1fadce0f705616e3ed96cabb318bcec
Related: OS#5335
This way it becomes a lot clearer what kind of content is expected to be
transmitted over the wire.
It is expected that in the future the bts_sm->gprs.nse.timer will
disappear and the values fed into struct abis_nm_ipacc_att_ns_cfg
come from osmo_tdef, etc.
Change-Id: I610ca34babc0b0ac9477622aa7b8360be8f3f59f
Depends: libosmocore.git Change-Id Ie477b0e6d79e6d408e0004fd60307afc5feaa3b6
Related: OS#5335
This way it becomes a lot clearer what kind of content is expected to be
transmitted over the wire.
It is expected that in the future the bts->gprs.cell.timer will
disappear and the values fed into struct abis_nm_ipacc_att_bssgp_cfg
come from osmo_tdef, etc.
Depends: libosmocore.git Change-Id Ibfd759cb8a252f801bb3a758ea7960072c96f254
Related: OS#5335
Change-Id: Ie659879c548b29a08eeb8bf3fc023bf3d7d52aa1
bts->gprs.cell.timer is initialized during BTS allocation from
bts_cell_timer_default.
Later on, during nanobts_gen_set_nse_attr(), the same default values are
applied to an internal buffer and immedately later overwritten by the
content of bts->gprs.cell.timer.
Hence, drop the temporary assignment since it gets overwritten and is
basically a NO-OP.
This is only an intermediate one-step-at-a-time commit, since anyway
that arrive has to be convertd to osmocom tdef, etc.
Change-Id: I2a170093e62f726e594d3b9c456087f47d2b4198
In PCUIF v.11 we use PCU_IF_SAPI_AGCH_2 exclusively. We use this SAPI
to transfer IMMEDIATE ASSIGNMENT messages for uplink and downlink. One
new feature of PCU_IF_SAPI_AGCH_2 is that the PCU may ask to send a
confirmation when the MAC block is sent.
CAUTION: This patch breaks compatibility to current master osmo-pcu (See
also "Depends")
Related: OS#5927
Depends: osmo-pcu.git I9effdcec1da91a6e2e7a7c41f95d3300ad1bb292
Change-Id: I709c27adaf09a6766cfde4d76d878626d30ebb3c
Since osmo-bsc uses RSL (with a propritary Ericsson RBS specific
extension) to send a confirmed IMMEDIATE ASSIGNMENT messages via
PCH, we can not just forward the MAC blocks into the paging queue
without determining whether the MAC block is a PAGING message or an
IMMEDIATE ASSIGNMENT message. the reason for this is that RSL uses
two different message types (IMMEDIATE ASSIGNMENT COMMAND and PAGING
COMMAND) to process IMMEDIATE ASSIGNMENT and PAGING messages.
This means we have to look into the MAC block to make sure whether
the message is a PAGING message or an IMMEDIATE ASSIGNMENT message.
We also need to make sure that the confirm flag is properly executed.
In the case of the IMMEDIATE ASSIGNMENT this means we have to include
(confirm=true) or not include (confirm=false) the RSL_IE_ERIC_MOBILE_ID
into the IMMEDIATE ASSIGNMENT COMMAND message.
In the case of PAGING we directly echo a confirmation after sending
the PAGING COMMAND via RSL when a confirmation is requested.
Related: OS#5927
Depends: osmo-pcu.git Ia202862aafc1f0cb6601574ef61eb9155de11f04
Change-Id: I3d2842626b7e8325860ea3160c7d900d39e953a0
The previous amount of 10 messages may be small if the BSC is processing
lots of measurements from lots of BTS connected to it.
Increase it to 100 by default, and allow changing the write_queue length
through the VTY.
Related: SYS#6550
Change-Id: Ib2e3591498c038b8e59f3ad447ac1f65928d6da8
The previous checks had several rough edges which may end up in
unexpected behaviors, specially with fd=0 vs fd=-1.
The new code is much more robust.
Change-Id: I96b0b5c4654970ba1c3e2aecfa896e310063ab6f
Since we now no longer refer to TLLI when we mean "message ID" (msg_id),
we should also remove the "_DT" / "_dt" suffix from structs and define
constants and replace it with "_2" if required.
Depends: osmo-pcu.git If641b507dcb6b176109c99dce7cff2a7561364b0
Change-Id: I628aaf19999a0004d0760d25ecd323cdbc0076f5
Related: OS#5927
The struct gsm_pcu_if_data_cnf_dt was added when the first experiments
mit Ericsson RBS base stations were made. It is essentially a copy of
gsm_pcu_if_data, where the mamber "data" was replaced with a member
"msg_id" (which was originally called "tlli"). Since we didn't know
back then which parameters we would still need at some later point we
kept all the other parameters. However, to this day we never used the
parameters below fn. Even fn was only used for logging purposes, but is
now also unused.
Let's remove all those unused members.
(Since all removed members are at the tail of the struct,
compatibility with other programs that use the PCUIF should not break.)
Change-Id: I37845408edd96017b50559964c82b2cdc5e143a7
Related: OS#5927
To confirm downlink IMMEDIATE ASSIGNMENT messages, we use the TLLI as an
identifier and the related struct member is also called "tlli".
Unfortunately this is misleading since the message identifier does not
necessarly have to be a TLLI. It is just an implementation detail that
osmo-pcu uses the TLLI as a message identifier.
To make that clear, lets rename the tlli member (and variable and
parameter names where it is passed on) to "msg_id".
(Since this change only renames variables and struct members it will not
break compatibility with other programs that use the PCUIF)
Related: OS#5927
Depends: osmo-pcu.git I4a25039dfe329e68879bc68936e49c4b190625e6
Change-Id: Ifb3f257099b52c50e525768484f9e93282089d0f
As stated in 3GPP TS 48.008, section 3.2.2.103, coding of the Speech
Codec Element for the CSData Codec Type differs from coding for the
actual speech codecs like FR/HR/AMR/etc. However, osmo-bsc currently
encodes the "Speech Codec (Choosen)" IE regardless of the channel
mode, be it GSM0808_CHAN_SPEECH or GSM0808_CHAN_DATA. This causes
failures at the establishment stage of modem-to-modem data calls.
Change-Id: I8b94c0292964f6d5f5ffa98ad8da03728f8bf6a0
Related: OS#6110, OS#4393
struct lchan_activate_info and struct lchan_modify_info use an enum to
define, if the channel type is for a normal channel, a VAMOS channel or
a VGCS/VBS channel.
Change-Id: I21167eb4192c02cd7b5e1574cddb382a3feaebe0
The assignment is triggered by the MSC by sending an ASSIGNMENT REQUEST
with a group call reference. The reference is used to find the VGCS/VBS
channel that belogs to the referenced call.
The existing VGCS/VBS channel is reactivated. This will put the channel
into a state where the MS can establish the link on it, to complete the
assignment. The old connection is released by the MSC and assignment
completion is handled by the VGCS FSM.
Change-Id: Idaa864cd5ce4df6c3193494ce12d91523c104d89
Related: OS#4852
Channel release is sent to MS that is in dedicated mode on the main
DCCH. Additionally it is sent as unit data on a VGCS/VBS to notify all
listeners that the channel has been released. All listeners return to
IDLE mode.
Change-Id: Ib777fe98c8ce2342082d88d227b796167d92cfe1
Related: OS#4852
Andreas Eversberg
Philipp Maier
Pau Espin
Oliver Smith
Vadim Yanitskiy
Harald Welte