libosmo-netif (not yet released) stream_{cli,srv} osmo_io read_cb API was
updated to provide read result status. Hence, now API users
can account for lower layer errors and act properly, like it used to
do with the previous ofd backend.
This commit partially reverts some error code paths removed in
85687bf176 when converting code to use
osmo_io osmo_stream backend.
Change-Id: I4cce5cb6ca98bc28a67dd6e927e9cdfd2312851a
Depends: libosmo-netif.git Change-Id I395c75ff1e9904757ce1d767a9ac2f779593c4c8
This new commands show information about logical channels:
net.btsN.trxM.tsI.show-lchan.full
net.btsN.trxM.show-lchan.full
net.btsN.show-lchan.full
net.show-lchan.full
Change-Id: I23c1a7e6f6679e3964e359fb202ffe6781a07e8a
This new command shows information about a logical channel using
net.btsN.trxM.tsI.lchanL.show.full
Change-Id: I5432800eae452b6df71a151a7649f228704ed0da
I guess it must have been a mistake when introducing this file.
The entire project is under AGPLv3, it doesn't make sense to have
one single file under GPLv2.
As th entire git commit history only contains sysmocom employees,
I have the authority to re-license it even if GPLv2 was done
intentionally at the time. Let's change it.
Change-Id: I5e5385f7630b41f1c4ad9534dbb4551e597ad596
IF we say "... under the terms of the GNU Affero General Public License"
then we cannot say "see the GNU General Public license" later on, that's
misleading and likely a copy+paste error somewhere.
The project license has always been AGPLv3-or-later.
Change-Id: I6b8ad5147ca76052213809e67856dcb80bff2b93
This new command allows to control MS power level for a specific
logical channel using net.btsN.trxM.tsI.lchanL.ms-power
This patch also adds a lchan node to the ctrl interface.
Depends: libosmocore.git Ibf2786f668ee7e4f5b6a9ef43f2141cd2d79b4e2
Change-Id: I6f556b66011be6126d6bac31a14101ba37f81cc4
Besides from making the ts ctrl interface follow the convention
of being in its own file, it will be used in the next patch to add
a ctrl interface for lchan.
Change-Id: I9840bddd4eae409bc8373912d54b6bbfc9fc1c1a
clang warns us about 'len' being set, but not used: And this is
abis_nm.c:2172:10: warning: variable 'len' set but not used [-Wunused-but-set-variable]
uint8_t len = attr_len;
^
This is actually a bug, because in the case of NACK we append 2 more
bytes {NM_ATT_NACK_CAUSES, NM_NACK_OBJCLASS_NOTSUPP}, and we need to
pass the final length to fill_om_fom_hdr(), including those optional
two bytes. Passing 'attr_len' (length of 'attr') is wrong.
Change-Id: I3ca8e761fdf99dd498a979ccc9d53c6c3e03e2cc
A switch (bool) is used to enable or disable NSVC 0 or 1. It is enabled
via any "gprs nsvc 0|1" command and disabled via "no gprs nsvc 0|1"
command. If it is disabled, it is treated as unconfigured, similar when
no remote IP or port has been defined.
Related: OS#6006
Change-Id: Ia112e86aa35f6a245d98ef1b3720c18835faeda6
This line shows all BTS an their OML states in a single line.
Additionally the uptime or downtime is displayed, if there was a connect
or disconnect of the OML link.
Related: OS#6018
Change-Id: I003fd32e589ddf53b7dd42089f904cfb598e3625
Make the output more readable and split it over two lines, in
preparation to add more information in the next patch.
Before:
OsmoBSC> show mscs
0 m3ua RI=SSN_PC,PC=0.23.3,SSN=BSSAP RI=SSN_PC,PC=0.23.1,SSN=BSSAP
After:
OsmoBSC> show mscs
MSC 0: RI=SSN_PC,PC=0.23.3,SSN=BSSAP <-> RI=SSN_PC,PC=0.23.1,SSN=BSSAP
ASP protocol: m3ua
Related: OS#6741
Change-Id: I70ad1b0f44f2a923248f4e3259747cb3fec98fd2
According to Table 10.5.2.3.1 in TS 144.018, radio-link-timeout
values are between 4 to 64 in steps of 4.
Change-Id: I733591d5f72f2e4f822761ca9eda85de7a4c6c81
osmo-bsc would not start with a config written from the vty due
to incorrect identation on the pcu-socket parameters.
Change-Id: I36a66794e654989b4b8bf54bb3727ccbfc2131fa
Only check for intersecting full rate AMR codec, if the BTS has at least
one full rate or dynamic time slot configured.
Only check for intersecting half rate AMR codec, if the BTS has at least
one half rate or dynamic time slot configured.
Related: OS#5926
Change-Id: Ia4a8e7f22dc652655ee7c5458624df8ae136dd95
I believe the actual intention was to reset the 'lchan_nr' variable,
and not the 'chan_nr'. The 'lchan_nr' is used to compose the 'cbits':
cbits = 0x04;
cbits += lchan_nr;
If the value is 4, then the result is:
cbits = 0x04 + 4 = 0x08
which corresponds to SDCCH8 (not SDCCH4), and is clearly wrong.
Change-Id: Ic9c7c2e46e24dab0b721221e9adcbbae2ca56d23
Fixes: ec1b5a0e9 "gsm_ts2chan_nr(): add assertions for lchan_nr"
Fixes: CID#336586
We already recover broken lchans where an ACTIV ACK or REL ACK arrives
late. Now add a recovery path for lchans that are broken because no
ACTIV ACK or REL ACK arrives at all.
Add a timeout of X28 = 30s to the lchan BORKEN state.
On timeout, attempt both a Channel Activation and a Channel Release. If
any of them is ACKed, we have successfully synced BTS and BSC's state.
After successful recovery, place the lchan back in the UNUSED state,
available for servicing subscribers.
If recovery is unsuccessful, just continue to attempt recovery every
further X28 seconds.
Patch-by: osmith, nhofmeyr
Related: osmo-ttcn3-hacks I9b4ddfc4a337808d9d5ec538c25fd390b1b2530f
Related: OS#5106
Related: SYS#6655
Change-Id: Ic4728b3efe843ea63e2a0b54b1ea8a925347484a
The assignment is repeated because the calling subscriber may not
receive the notification on the DCCH, during handover process. After the
assignment is complete, the calling subscriber will receive
notification.
This cannot be done automatically by the BTS, because the BTS has no
relation between the notifications and the channels.
The notification is required, so that the MS knows the channel to listen
to when leaving the uplink the first time. If no notification is
received, the MS will abort the call.
Change-Id: Ife568b8c2756be332c0b8de21111f66f6e537c4d
Title refers to the maximum length of the osmo_wqueue used for
the PCU socket connection.
Related: OS#5774
Change-Id: Ic5f19f4613bccaf582997a4d02b689adee083a0b
The lchan FSM timers were originally implemented to model earlier code
as closely as possible. Now it has come up that T3111 is used in the
wrong place:
3GPP TS 44.018 says:
T3111:
This timer is used to delay the channel deactivation after
disconnection of the main signalling link.
Its purpose is to let some time for possible repetition of the disconnection.
Its value is equal to the value of T3110.
Before this patch, we use it also to time the RF REL ACK message. That
is pretty bad, because T3111 is only 2 seconds by default, making RF
CHAN REL vulnerable for timeout. When a user increased T3111 to
alleviate the problem, the result is that each lchan also delays its
normal channel release procedure by the configured amount of time. Very
inelegant.
Instead, use the X6 timer for REL ACK, because X6 already times the CHAN
ACTIV ACK, which is semantically identical.
Compatibility / user impact: No negative impact expected.
We can assume that every user out there has X6 configured to work for
CHAN ACTIV ACK. From that logic, switching channel release ACK to the
same timer is guaranteed to be what the user intends. We could instruct
users in the release notes that they may now choose T3111 freely (as
short as 2 seconds) without jeopardising channel release anymore.
Related: SYS#6655
Change-Id: Ibd118fa23e5deb4381bc31b11a7b495f57901d6c
At the moment the PCU has no way of knowing with which BTS model it is
used with. However, some BTS models may require slightly different
behaviour by the PCU, depending on which BTS model is used. So, lets add
an additional bts_model field to struct gsm_pcu_if_info_ind in order to
convey the exact BTS model to the PCU.
Related: OS#6191
Depends: osmo-pcu.git I48eb75f65ab54fdec41ef913e24c1f18cd4a4047
Change-Id: I4b58912ad7be3070829614853901aa19108ba2c0
Not only l_bts must be declared outside the for-loop, but also last_i.
This is a fixup of I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c.
Related: CID#330311
Change-Id: Ia10c5e68cb2940d9360d78f606af25bb207ee55f
l_bts must be declared outside the for-loop. If the loop is passed with
n_bts set the first time, l_bts is set. If the loop is passed with
n_bts set next time(s), l_bts is used to encode additional neighbor
cell infos.
Related: CID#330310 and CID#330311
Change-Id: I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c
There are still some remains that are related to the old PCUIF v10
protocol version. Let's clean those up.
Related: OS#5927
Depends: osmo-pcu.git I68a3f59d5c960ae3a4fbd74f9d4a894295cb9ed8
Change-Id: Iebb3a634fee680bdc3636a61f3ccaa1e97e54a64
For each BTS, an SI 10 is generated with the informations about all
neighbor BTS that have the same group/broadcast call.
The SI 10 will only define neighbor cells within the same BSC, because
it does not know about neighbor cells within other BSCs.
When multiple channels are used for a group/broadcast call, the SI 10
is generated after all channels have been activated. Subsequent channel
activations result in an update of SI 10 on all channels.
Change-Id: Icd3101e6dd935a57f003253aaef400c2cf95a0c3
The error logging message within this function is moved to the user
neigh_list_get_arfcn().
In case of an error, which results in measurement report with cell
index that does not exist in the list of neigbor cells, the measurement
report is truncated to 0 neighbor cell measurements.
Change-Id: Ia8a1dca4837536129d17e7784b892bcb75b9ca4b
System Information 2 (bis/ter) uses BA_IND of 0. This refers to
"neigh_list". System information 5 (bis/ter) uses BA_IND of 1. This may
refer to "neigh_list" or optionally "si5_neigh_list", depending on the
VTY settings.
If BA_IND of 1 is received in measurement report and if the optional
"si5_neigh_list" is used, this list is chosen to decode the measurement
report.
Change-Id: Ie9123928fb3ae6f10921ecf01d1b50330661da38
Before this patch, neighbor cells with ARFCN 955 to 974 were ignored in
the GSM 900 band. This resulted an empty 'bit map 0' list in SI2/SI5
messages.
This patch includes R-GSM ARFCN in range 955 to 974. A different encoding
is chosen, if neigboring cells fall within this range.
Change-Id: I40d024290fa4be2ba8d3149ec841b182d0cc8c1f
The PCUIF flag PCU_IF_FLAG_SYSMO was originally used by osmo-bts-sysmo
to signal to the PCU that the direct PHY access for the sysmo-bts DSP
should be enabled. With time, support for other BTS models was added and
the flag became a synonym for "direct PHY access", so it makes sense to
rename it to "PCU_IF_FLAG_DIRECT_PHY"
Related: OS#6191
Depends: osmo-pcu.git I29b7b78a3a91d062b9ea3cd72623d30618cd3f0b
Change-Id: I23df067df99b76048667131905c4448d32d80640
Pau Espin
Harald Welte
Matan Perelman
Vadim Yanitskiy
Oliver Smith
Neels Hofmeyr
Keith Whyte
Philipp Maier