{bts,bsc}.adoc: Drop deprecated OsmoNITB references

dyn_ts_allow_tch_f is also deprecated and should not be used, so drop
that too.

Change-Id: Icc91dd41a237531cb512fa36d8b18d4d8d5ca8ed
This commit is contained in:
Pau Espin 2020-07-20 13:11:04 +02:00
parent 1db53c868a
commit 5487387345
2 changed files with 8 additions and 14 deletions

View File

@ -1,9 +1,5 @@
== BSC level configuration
The BSC component is shared between OsmoBSC and OsmoNITB. This chapter
describes some of the configuration options related to this shared BSC
component.
=== Hand-over
==== Hand-over in GSM
@ -25,11 +21,10 @@ communicates those by means of RSL to the BSC.
The hand-over decision is made by an algorithm that processes those
measurement results and determines when to perform the hand-over.
==== Configuration of hand-over in OsmoBSC/OsmoNITB
==== Configuration of hand-over in OsmoBSC
OsmoBSC (like the internal BSC component of OsmoNITB) only support
so-called intra-BSC hand-over, where the hand-over is performed between
two BTSs within the same BSC.
OsmoBSC only support so-called intra-BSC hand-over, where the hand-over is
performed between two BTSs within the same BSC.
Hand-over is enabled and configured by the use of a set of `handover`
commands. Using those, you can tune the key parameters of the hand-over

View File

@ -287,9 +287,9 @@ and then assign a logical TCH channel on it. Hence, though compatibility with
the BTS needs to be ensured, any MSC is compatible with dynamic timeslots by
definition.
OsmoBSC and OsmoNITB support two kinds of dynamic timeslot handling, configured
via the `network` / `bts` / `trx` / `timeslot` / `phys_chan_config`
configuration. Not all BTS models support dynamic channels.
OsmoBSC supports two kinds of dynamic timeslot handling, configured via the
`network` / `bts` / `trx` / `timeslot` / `phys_chan_config` configuration. Not
all BTS models support dynamic channels.
[[dyn_ts_compat]]
.Dynamic timeslot support by various BTS models
@ -349,9 +349,8 @@ timeslots to TCH, and no PDCH timeslots would be left for GPRS service.
==== Dynamic Timeslot Configuration Examples
This is an extract of an `osmo-bsc` or `osmo-nitb` config file. A timeslot
configuration with five Osmocom style dynamic timeslots and one dedicated PDCH
may look like this:
This is an extract of an `osmo-bsc`` config file. A timeslot configuration with
five Osmocom style dynamic timeslots and one dedicated PDCH may look like this:
----
network