From 54873873452989daca5185ad22f788c6bfe64fa2 Mon Sep 17 00:00:00 2001 From: Pau Espin Pedrol Date: Mon, 20 Jul 2020 13:11:04 +0200 Subject: [PATCH] {bts,bsc}.adoc: Drop deprecated OsmoNITB references dyn_ts_allow_tch_f is also deprecated and should not be used, so drop that too. Change-Id: Icc91dd41a237531cb512fa36d8b18d4d8d5ca8ed --- doc/manuals/chapters/bsc.adoc | 11 +++-------- doc/manuals/chapters/bts.adoc | 11 +++++------ 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/doc/manuals/chapters/bsc.adoc b/doc/manuals/chapters/bsc.adoc index 49d25e5a9..0d3ded5c4 100644 --- a/doc/manuals/chapters/bsc.adoc +++ b/doc/manuals/chapters/bsc.adoc @@ -1,9 +1,5 @@ == BSC level configuration -The BSC component is shared between OsmoBSC and OsmoNITB. This chapter -describes some of the configuration options related to this shared BSC -component. - === Hand-over ==== Hand-over in GSM @@ -25,11 +21,10 @@ communicates those by means of RSL to the BSC. The hand-over decision is made by an algorithm that processes those measurement results and determines when to perform the hand-over. -==== Configuration of hand-over in OsmoBSC/OsmoNITB +==== Configuration of hand-over in OsmoBSC -OsmoBSC (like the internal BSC component of OsmoNITB) only support -so-called intra-BSC hand-over, where the hand-over is performed between -two BTSs within the same BSC. +OsmoBSC only support so-called intra-BSC hand-over, where the hand-over is +performed between two BTSs within the same BSC. Hand-over is enabled and configured by the use of a set of `handover` commands. Using those, you can tune the key parameters of the hand-over diff --git a/doc/manuals/chapters/bts.adoc b/doc/manuals/chapters/bts.adoc index 223cec169..94e89a41c 100644 --- a/doc/manuals/chapters/bts.adoc +++ b/doc/manuals/chapters/bts.adoc @@ -287,9 +287,9 @@ and then assign a logical TCH channel on it. Hence, though compatibility with the BTS needs to be ensured, any MSC is compatible with dynamic timeslots by definition. -OsmoBSC and OsmoNITB support two kinds of dynamic timeslot handling, configured -via the `network` / `bts` / `trx` / `timeslot` / `phys_chan_config` -configuration. Not all BTS models support dynamic channels. +OsmoBSC supports two kinds of dynamic timeslot handling, configured via the +`network` / `bts` / `trx` / `timeslot` / `phys_chan_config` configuration. Not +all BTS models support dynamic channels. [[dyn_ts_compat]] .Dynamic timeslot support by various BTS models @@ -349,9 +349,8 @@ timeslots to TCH, and no PDCH timeslots would be left for GPRS service. ==== Dynamic Timeslot Configuration Examples -This is an extract of an `osmo-bsc` or `osmo-nitb` config file. A timeslot -configuration with five Osmocom style dynamic timeslots and one dedicated PDCH -may look like this: +This is an extract of an `osmo-bsc`` config file. A timeslot configuration with +five Osmocom style dynamic timeslots and one dedicated PDCH may look like this: ---- network