LU counters: count completion and failure, not messages sent

From a human admin viewpoint it doesn't make sense to count the messages sent:

When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect
the MS to respond with a TMSI Realloc Complete message. When that fails to come
through, the LU actually ends in failure, even though a LU Accept was sent.

If a conn breaks/vanishes during LU, we cancel the LU without sending any reply
at all, so the failed LU would not be counted.

Instead, count Location Updating results, i.e. completion and failures.

(With the new VLR developments, LU counters need to be triggered in completely
different places, and this patch prepares for that by providing sensible
counters.)

Change-Id: I03f14c6a2f7ec5e1d3ba401e32082476fc7b0cc6
This commit is contained in:
Neels Hofmeyr 2016-05-09 13:18:03 +02:00
parent b1e6b37493
commit 36891a7d9d
3 changed files with 38 additions and 20 deletions

View File

@ -218,8 +218,8 @@ enum {
MSC_CTR_LOC_UPDATE_TYPE_NORMAL,
MSC_CTR_LOC_UPDATE_TYPE_PERIODIC,
MSC_CTR_LOC_UPDATE_TYPE_DETACH,
MSC_CTR_LOC_UPDATE_RESP_REJECT,
MSC_CTR_LOC_UPDATE_RESP_ACCEPT,
MSC_CTR_LOC_UPDATE_FAILED,
MSC_CTR_LOC_UPDATE_COMPLETED,
MSC_CTR_SMS_SUBMITTED,
MSC_CTR_SMS_NO_RECEIVER,
MSC_CTR_SMS_DELIVERED,
@ -240,8 +240,8 @@ static const struct rate_ctr_desc msc_ctr_description[] = {
[MSC_CTR_LOC_UPDATE_TYPE_NORMAL] = {"loc_update_type.normal", "Received location update normal requests."},
[MSC_CTR_LOC_UPDATE_TYPE_PERIODIC] = {"loc_update_type.periodic", "Received location update periodic requests."},
[MSC_CTR_LOC_UPDATE_TYPE_DETACH] = {"loc_update_type.detach", "Received location update detach indication."},
[MSC_CTR_LOC_UPDATE_RESP_REJECT] = {"loc_update_resp.reject", "Sent location update reject responses."},
[MSC_CTR_LOC_UPDATE_RESP_ACCEPT] = {"loc_update_resp.accept", "Sent location update accept responses."},
[MSC_CTR_LOC_UPDATE_FAILED] = {"loc_update_resp.failed", "Rejected location updates."},
[MSC_CTR_LOC_UPDATE_COMPLETED] = {"loc_update_resp.completed", "Successful location updates."},
[MSC_CTR_SMS_SUBMITTED] = {"sms.submitted", "Received a RPDU from a MS (MO)."},
[MSC_CTR_SMS_NO_RECEIVER] = {"sms.no_receiver", "Counts SMS which couldn't routed because no receiver found."},
[MSC_CTR_SMS_DELIVERED] = {"sms.delivered", "Global SMS Deliver attempts."},

View File

@ -295,7 +295,7 @@ static int authorize_subscriber(struct gsm_loc_updating_operation *loc,
}
}
static void release_loc_updating_req(struct gsm_subscriber_connection *conn, int release)
static void _release_loc_updating_req(struct gsm_subscriber_connection *conn, int release)
{
if (!conn->loc_operation)
return;
@ -310,11 +310,31 @@ static void release_loc_updating_req(struct gsm_subscriber_connection *conn, int
msc_release_connection(conn);
}
static void loc_updating_failure(struct gsm_subscriber_connection *conn, int release)
{
if (!conn->loc_operation)
return;
LOGP(DMM, LOGL_ERROR, "Location Updating failed for %s\n",
subscr_name(conn->subscr));
rate_ctr_inc(&conn->network->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_FAILED]);
_release_loc_updating_req(conn, release);
}
static void loc_updating_success(struct gsm_subscriber_connection *conn, int release)
{
if (!conn->loc_operation)
return;
LOGP(DMM, LOGL_INFO, "Location Updating completed for %s\n",
subscr_name(conn->subscr));
rate_ctr_inc(&conn->network->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_COMPLETED]);
_release_loc_updating_req(conn, release);
}
static void allocate_loc_updating_req(struct gsm_subscriber_connection *conn)
{
if (conn->loc_operation)
LOGP(DMM, LOGL_ERROR, "Connection already had operation.\n");
release_loc_updating_req(conn, 0);
loc_updating_failure(conn, 0);
conn->loc_operation = talloc_zero(tall_locop_ctx,
struct gsm_loc_updating_operation);
@ -349,9 +369,11 @@ static int finish_lu(struct gsm_subscriber_connection *conn)
* The gsm0408_loc_upd_acc sends a MI with the TMSI. The
* MS needs to respond with a TMSI REALLOCATION COMPLETE
* (even if the TMSI is the same).
* If avoid_tmsi == true, we don't send a TMSI, we don't
* expect a reply and Location Updating is done.
*/
if (avoid_tmsi)
release_loc_updating_req(conn, 1);
loc_updating_success(conn, 1);
return rc;
}
@ -364,7 +386,7 @@ static int _gsm0408_authorize_sec_cb(unsigned int hooknum, unsigned int event,
switch (event) {
case GSM_SECURITY_AUTH_FAILED:
release_loc_updating_req(conn, 1);
loc_updating_failure(conn, 1);
break;
case GSM_SECURITY_ALREADY:
@ -407,7 +429,7 @@ void gsm0408_clear_request(struct gsm_subscriber_connection *conn, uint32_t caus
* Cancel any outstanding location updating request
* operation taking place on the subscriber connection.
*/
release_loc_updating_req(conn, 0);
loc_updating_failure(conn, 0);
/* We might need to cancel the paging response or such. */
if (conn->sec_operation && conn->sec_operation->cb) {
@ -459,8 +481,6 @@ int gsm0408_loc_upd_rej(struct gsm_subscriber_connection *conn, uint8_t cause)
struct gsm_bts *bts = conn->bts;
struct msgb *msg;
rate_ctr_inc(&conn->network->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_RESP_REJECT]);
msg = gsm48_create_loc_upd_rej(cause);
if (!msg) {
LOGP(DMM, LOGL_ERROR, "Failed to create msg for LOCATION UPDATING REJECT.\n");
@ -508,8 +528,6 @@ static int gsm0408_loc_upd_acc(struct gsm_subscriber_connection *conn)
DEBUGP(DMM, "-> LOCATION UPDATE ACCEPT\n");
rate_ctr_inc(&conn->network->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_RESP_ACCEPT]);
return gsm48_conn_sendmsg(msg, conn, NULL);
}
@ -566,7 +584,7 @@ static int mm_rx_id_resp(struct gsm_subscriber_connection *conn, struct msgb *ms
}
if (!conn->subscr && conn->loc_operation) {
gsm0408_loc_upd_rej(conn, net->reject_cause);
release_loc_updating_req(conn, 1);
loc_updating_failure(conn, 1);
return 0;
}
if (conn->loc_operation)
@ -595,7 +613,7 @@ static void loc_upd_rej_cb(void *data)
LOGP(DMM, LOGL_DEBUG, "Location Updating Request procedure timedout.\n");
gsm0408_loc_upd_rej(conn, conn->network->reject_cause);
release_loc_updating_req(conn, 1);
loc_updating_failure(conn, 1);
}
static void schedule_reject(struct gsm_subscriber_connection *conn)
@ -672,7 +690,7 @@ static int mm_rx_loc_upd_req(struct gsm_subscriber_connection *conn, struct msgb
subscr = subscr_create(conn->network, mi_string);
if (!subscr) {
gsm0408_loc_upd_rej(conn, conn->network->reject_cause);
release_loc_updating_req(conn, 0);
loc_updating_failure(conn, 0); /* FIXME: set release == true? */
return 0;
}
break;
@ -1401,7 +1419,7 @@ static int gsm0408_rcv_mm(struct gsm_subscriber_connection *conn, struct msgb *m
case GSM48_MT_MM_TMSI_REALL_COMPL:
DEBUGP(DMM, "TMSI Reallocation Completed. Subscriber: %s\n",
subscr_name(conn->subscr));
release_loc_updating_req(conn, 1);
loc_updating_success(conn, 1);
break;
case GSM48_MT_MM_IMSI_DETACH_IND:
rc = gsm48_rx_mm_imsi_detach_ind(conn, msg);

View File

@ -827,9 +827,9 @@ DEFUN(show_stats,
vty_out(vty, "IMSI Detach Indications : %lu%s",
net->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_TYPE_DETACH].current,
VTY_NEWLINE);
vty_out(vty, "Location Update Response: %lu accept, %lu reject%s",
net->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_RESP_ACCEPT].current,
net->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_RESP_REJECT].current,
vty_out(vty, "Location Updating Results: %lu completed, %lu failed%s",
net->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_COMPLETED].current,
net->msc_ctrs->ctr[MSC_CTR_LOC_UPDATE_FAILED].current,
VTY_NEWLINE);
vty_out(vty, "Handover : %lu attempted, %lu no_channel, %lu timeout, "
"%lu completed, %lu failed%s",