cellular-infrastructure
/
osmo-bsc
mirror of https://gerrit.osmocom.org/osmo-bsc
8
0
Fork 0
Code Issues Releases Wiki Activity
osmo-bsc/doc/examples/osmo-nitb/nanobts/openbsc.cfg

78 lines
1.5 KiB
INI
Raw Normal View History

[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
!
! OpenBSC configuration saved from vty
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
! !
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
password foo
!
line vty
no login
!
src: port openBSC over libosmo-abis This is a big patch that ports openBSC over libosmo-abis. Sorry, the changes that are included here are all dependent of libosmo-abis, splitting them into smaller pieces would leave the repository in some intermediate state, which is not desired. The main changes are: - The directory libabis/ has been removed as it now lives in libosmo-abis. - new configuration file format for nanoBTS and HSL femto, we need to define the virtual e1_line and attach it to the OML link. - all the existing BTS drivers (nanoBTS, hsl femto, Nokia site, BS11 and rbs2000) now use the new libosmo-abis framework. - use r232 input driver available in libosmo-abis for bs11_config. - use ipa_msg_recv instead of old ipaccess_read_msg function. - delete definition of gsm_e1_subslot and input_signal_data. These structures now lives in libosmo-abis. Most of this patch are deletions of libabis/ which has been moved to libosmo-abis. This patch also modifies openBSC to use all the new definitions available in libosmocore and libosmo-abis. In order to do that, we have replaced the following: - DINP, DMI, DMIB and DMUX by their respective DL* correspondences. - SS_GLOBAL by SS_L_GLOBAL - SS_INPUT by SS_L_INPUT - S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN - SS_INPUT by SS_L_INPUT - S_INP_* by S_L_INP_* sub-signals - E1INP_NODE by L_E1INP_NODE vty node This patch has been tested with: - one nanoBTS - the HSL femto with the examples available under libosmo-abis - BS11 with both dahdi and misdn drivers.
2011-08-17 20:44:07 +00:00
e1_input
e1_line 0 driver ipa
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
network
network country code 1
mobile network code 1
short name OpenBSC
long name OpenBSC
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
auth policy closed
location updating reject cause 13
encryption a5 0
make 'neci 1' the default in the example config files
2010-07-14 11:56:36 +00:00
neci 1
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
rrlp mode none
mm info 1
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
[network] Make T3101 configurable and use it in abis_rsl
2009-11-21 20:18:38 +00:00
timer t3101 10
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
timer t3103 0
timer t3105 0
timer t3107 0
lchan: Introduce T3109 handling for the release procedure T3109 is started when the SACCH is deactivated. It is stopped when the phones sends the DISC/UA/UM on LAPDm for the main signalling link. In case of timeout the abnormal release procedure will be initiated. Make sure to not issue the SACCH Deactivate twice to avoid confusing the equipment. This is still not fully spec compliant. In case of a timeout the abnormal release handling will be started which involves starting T3111+2. The error handling should be split out of the rf channel release method, e.g. lchan_release should be called and check if the channel release was already initiated.
2011-12-28 15:21:05 +00:00
timer t3109 4
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
timer t3111 0
[network] Make use of T3113 for paging Add it to the configuration files and make use of it in the the paging.c.
2009-11-21 20:48:53 +00:00
timer t3113 60
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
timer t3115 0
timer t3117 0
timer t3119 0
timer t3141 0
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
bts 0
type nanobts
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
band DCS1800
cell_identity 0
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
location_area_code 1
training_sequence_code 7
base_station_id_code 63
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
channel allocator ascending
rach tx integer 9
rach max transmission 7
ip.access unit_id 1801 0
src: port openBSC over libosmo-abis This is a big patch that ports openBSC over libosmo-abis. Sorry, the changes that are included here are all dependent of libosmo-abis, splitting them into smaller pieces would leave the repository in some intermediate state, which is not desired. The main changes are: - The directory libabis/ has been removed as it now lives in libosmo-abis. - new configuration file format for nanoBTS and HSL femto, we need to define the virtual e1_line and attach it to the OML link. - all the existing BTS drivers (nanoBTS, hsl femto, Nokia site, BS11 and rbs2000) now use the new libosmo-abis framework. - use r232 input driver available in libosmo-abis for bs11_config. - use ipa_msg_recv instead of old ipaccess_read_msg function. - delete definition of gsm_e1_subslot and input_signal_data. These structures now lives in libosmo-abis. Most of this patch are deletions of libabis/ which has been moved to libosmo-abis. This patch also modifies openBSC to use all the new definitions available in libosmocore and libosmo-abis. In order to do that, we have replaced the following: - DINP, DMI, DMIB and DMUX by their respective DL* correspondences. - SS_GLOBAL by SS_L_GLOBAL - SS_INPUT by SS_L_INPUT - S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN - SS_INPUT by SS_L_INPUT - S_INP_* by S_L_INP_* sub-signals - E1INP_NODE by L_E1INP_NODE vty node This patch has been tested with: - one nanoBTS - the HSL femto with the examples available under libosmo-abis - BS11 with both dahdi and misdn drivers.
2011-08-17 20:44:07 +00:00
oml ip.access stream_id 255 line 0
update openbsc.cfg examples for new gprs syntax
2010-04-18 19:33:00 +00:00
gprs mode none
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
trx 0
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
rf_locked 0
[ip.access] Add an example configuration file
2009-10-26 19:16:27 +00:00
arfcn 514
update the openbts.cfg.nanobts example
2010-04-18 19:08:26 +00:00
nominal power 23
max_power_red 20
rsl e1 tei 0
fix bsc_vty out: timeslot indented too deeply. In 'show running-config', timeslot appears as a sub-element of rsl, but it is a direct child of trx. Fix the timeslot section in vty_out by removing one space of idention. Adjust various config examples. Rationale: it's not relevant for function, but confuses human operators. Fixing it will save the next hacker some time.
2016-01-27 13:20:29 +00:00
timeslot 0
phys_chan_config CCCH+SDCCH4
timeslot 1
phys_chan_config SDCCH8
timeslot 2
phys_chan_config TCH/F
timeslot 3
phys_chan_config TCH/F
timeslot 4
phys_chan_config TCH/F
timeslot 5
phys_chan_config TCH/F
timeslot 6
phys_chan_config TCH/F
timeslot 7
phys_chan_config TCH/F