9
0
Fork 0
This repository has been archived on 2022-06-17. You can view files and clone it, but cannot push or open issues or pull requests.
openggsn/examples/ggsn.conf

93 lines
2.4 KiB
Plaintext

##############################################################################
#
# Sample ggsn configuration file
#
##############################################################################
# TAG: fg
# Include this flag if process is to run in the foreground
#
#fg
# TAG: debug
# Include this flag to include debug information.
#debug
# TAG: conf
# Configuration file to use. This file is the configuration file,
# so changing this parameter in the configuration file does not make
# sense. Use it on the command line instead.
# TAG: pidfile
# File to store information about the process id of the program.
# The program must have write access to this file/directory.
#pidfile /var/run/ggsn.pid
# TAG: statedir
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
#statedir /var/lib/ggsn/
# TAG: listen
# Specifies the local IP address to listen to
#listen 10.0.0.240
# TAG: net
# IP network address of external packet data network
# Used to set up network interface.
#net 192.168.0.0/24
# TAG: ipup
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
#ipup /etc/ggsn/ip-up
# TAG: ipdown
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
#ipdown /etc/ggsn/ip-down
# TAG: dynip
# Dynamic IP address pool.
# Used for allocation of dynamic IP address when address is not given
# by HLR.
# If this option is not given then the net option is used as a substitute.
#dynip 192.168.0.0/24
# TAG: statip
# Use of this tag is currently UNSUPPORTED
# Static IP address pool.
# Used for allocation of static IP address by means of HLR.
#statip 192.168.1.0/24
# TAG: pcodns1
# Protocol configuration option domain name system server 1.
#pcodns1 0.0.0.0
# TAG: pcodns2
# Protocol configuration option domain name system server 2.
#pcodns2 0.0.0.0
# TAG: timelimit
# Exit after timelimit seconds.
# Setting timelimit to zero will cause the program not to exit.
#timelimit 0
# TAG: apn
# Use of this tag is EXPERIMENTAL
# Access point name to connect to when run in client mode.
#apn internet
# TAG: qos
# Use of this tag is EXPERIMENTAL
# Requested Quality of Service used when run in client mode.
# 3 bytes corresponding to ????
#qos 0x0b921f
# TAG: qos
# Enable GTP datapath through Linux kernel driver gtp.ko (since 4.7).
#gtp-linux