132 lines
3.2 KiB
Plaintext
132 lines
3.2 KiB
Plaintext
##############################################################################
|
|
#
|
|
# Sample sgsnemu configuration file
|
|
#
|
|
##############################################################################
|
|
|
|
# TAG: debug
|
|
# Include this flag to include debug information.
|
|
#debug
|
|
|
|
|
|
# TAG: conf
|
|
# Configuration file to use. This file is the configuration file,
|
|
# so changing this parameter in the configuration file does not make
|
|
# sense. Use it on the command line instead.
|
|
|
|
# TAG: pidfile
|
|
# File to store information about the pricess id of the program.
|
|
# The program must have write access to this file/directory.
|
|
#pidfile ./sgsnemu.pid
|
|
|
|
# TAG: statedir
|
|
# Directory to use for nonvolatile storage.
|
|
# The program must have write access to this directory.
|
|
#statedir ./
|
|
|
|
|
|
# TAG: dns
|
|
# DNS server to use for ns lookups.
|
|
# If this tag is not set the system default DNS will be used.
|
|
#dns 10.1.2.3
|
|
|
|
# TAG: listen
|
|
# Specifies the local IP address to listen to
|
|
#listen 10.0.0.217
|
|
|
|
# TAG: remote
|
|
# Specifies the remote IP address to connect to
|
|
# If DNS is setup correctly it should be possible to specify the
|
|
# access point name (APN) as the remote address.
|
|
#remote 10.0.0.240
|
|
|
|
|
|
# TAG: contexts
|
|
# Number of contexts to establish from the emulator to the ggsn.
|
|
# Set this tag to zero to not establish any contexts.
|
|
#contexts 1
|
|
|
|
# TAG: timelimit
|
|
# Disconnect contexts after timelimit seconds, and exit the program.
|
|
# Setting timelimit to zero will cause the program not to disconnect.
|
|
#timelimit 0
|
|
|
|
|
|
# TAG: apn
|
|
# Access point name to connect to when run in client mode.
|
|
#apn internet
|
|
|
|
# TAG: selmode
|
|
# Selection mode to use when connecting to GGSN.
|
|
#selmode 0x01
|
|
|
|
# TAG: imsi
|
|
# IMSI number used when run in client mode.
|
|
#imsi 2400101234567890
|
|
|
|
# TAG: msisdn
|
|
# MSISDN number used when run in client mode.
|
|
#msisdn 46702123456
|
|
|
|
# TAG: qos
|
|
# Requested Quality of Service used when run in client mode.
|
|
# 3 bytes corresponding to ????
|
|
#qos 0x0b921f
|
|
|
|
# TAG: uid
|
|
# User ID used when run in client mode.
|
|
#uid mig
|
|
|
|
# TAG: pwd
|
|
# Password used when run in client mode.
|
|
#pwd hemlig
|
|
|
|
|
|
# TAG: createif
|
|
# Use this flag if you want to set up a local network interface after
|
|
# a PDP context has been established.
|
|
#createif
|
|
|
|
# TAG: defaultroute
|
|
# Use this flag if you want to add a default route after a network interface
|
|
# had been established.
|
|
#defaultroute
|
|
|
|
# TAG: ipup
|
|
# Script executed after network interface has been brought up.
|
|
# Executed with the following parameters: <devicename> <ip address>
|
|
#ipup /etc/sgsnemu/ip-up
|
|
|
|
# TAG: ipdown
|
|
# Script executed after network interface has been taken down.
|
|
# Executed with the following parameters: <devicename> <ip address>
|
|
#ipdown /etc/sgsnemu/ip-down
|
|
|
|
|
|
# TAG: pinghost
|
|
# Ping a remote host through a PDP context by using ICMP echo messages.
|
|
# If more than one PDP context has been established the ICMP messages will
|
|
# be distributed between all available contexts.
|
|
#pinghost 192.168.0.0
|
|
|
|
# TAG: pingrate
|
|
# Number of ping messages to send off each second.
|
|
#pingrate 1
|
|
|
|
# TAG: pingsize
|
|
# Size of ICMP echo message payload. Add 28 to get the full IP packet size.
|
|
#pingsize 56
|
|
|
|
# TAG: pingcount
|
|
# Number of ping messages to send off.
|
|
#pingcount 0
|
|
|
|
# TAG: pingquiet
|
|
# Do not print ping packet info.
|
|
#pingquiet
|
|
|
|
|
|
|
|
|
|
|