############################################################################## # # Sample ggsn configuration file # ############################################################################## # TAG: fg # Include this flag if process is to run in the foreground # #fg # TAG: debug # Include this flag to include debug information. #debug # TAG: conf # Configuration file to use. This file is the configuration file, # so changing this parameter in the configuration file does not make # sense. Use it on the command line instead. # TAG: pidfile # File to store information about the process id of the program. # The program must have write access to this file/directory. #pidfile /var/run/ggsn.pid # TAG: statedir # Directory to use for nonvolatile storage. # The program must have write access to this directory. #statedir /var/lib/ggsn/ # TAG: listen # Specifies the local IP address to listen to #listen 10.0.0.240 # TAG: net # IP network address of external packet data network # Used to set up network interface. #net 192.168.0.0/24 # TAG: ipup # Script executed after network interface has been brought up. # Executed with the following parameters: #ipup /etc/ggsn/ip-up # TAG: ipdown # Script executed after network interface has been taken down. # Executed with the following parameters: #ipdown /etc/ggsn/ip-down # TAG: dynip # Dynamic IP address pool. # Used for allocation of dynamic IP address when address is not given # by HLR. # If this option is not given then the net option is used as a substitute. #dynip 192.168.0.0/24 # TAG: statip # Use of this tag is currently UNSUPPORTED # Static IP address pool. # Used for allocation of static IP address by means of HLR. #statip 192.168.1.0/24 # TAG: pcodns1 # Protocol configuration option domain name system server 1. #pcodns1 0.0.0.0 # TAG: pcodns2 # Protocol configuration option domain name system server 2. #pcodns2 0.0.0.0 # TAG: timelimit # Exit after timelimit seconds. # Setting timelimit to zero will cause the program not to exit. #timelimit 0 # TAG: apn # Use of this tag is EXPERIMENTAL # Access point name to connect to when run in client mode. #apn internet # TAG: qos # Use of this tag is EXPERIMENTAL # Requested Quality of Service used when run in client mode. # 3 bytes corresponding to ???? #qos 0x0b921f # TAG: qos # Enable GTP datapath through Linux kernel driver gtp.ko (since 4.7). #gtp-linux