47c9faac3b
mtp: Attempt to implement the MTP Restart properly
...
For the SSP functionatilty we will need to have the timers T18
and T20. In the period of T18 we will collect TFP/TFR/TFA for the
reachable nodes of the system. Each of this node will send us a TRA
when it is finished. Right now we assume to only have one node and
stop the T18 after the TRA of this node. Then we would need to send
the TFP/TFR we have collected. On the expiry of the T20 timer we
will need to send our TRA and notify local users.
For more complex routing we will need to have a shared routing
cache and remember which SSNs and OPCs are reachable and have inter
linkset notifications.
2011-02-23 15:27:09 +01:00
8d7027846f
mtp: Do not start linktest on a blocked link
2011-02-23 15:25:36 +01:00
7176030e02
vty: Add all mighty new vty interface for osmo-stp
...
This new interface allows to have multiple linksets, msc
connections and ways to connect those in one instance of
the osmo-stp. Forbid to reset linksets without an app.
2011-02-23 15:25:35 +01:00
2917644d50
vty: Move the actual commands into a new file in preparation
2011-02-22 21:05:59 +01:00
318e830463
vty: Always work through the linkset number for the commands
2011-02-22 21:05:59 +01:00
169a1a918c
misc: Use llist_add_tail to add new links to the end
2011-02-22 21:05:59 +01:00
e62e4b05bf
m2ua: Make sure all replies contain the link identifier
2011-02-22 21:05:59 +01:00
cfe9d718e2
vty: Remove more globals from the bsc data.
...
This is a interim solution until we have the new and all mighty
new config file format. This should work for now, makes the init
abit harder to understand though.
2011-02-22 21:05:59 +01:00
4cee7c0901
m2ua: Start link only after we had the emergency alignment
...
This should avoid us getting an error as we are sending the
SLTM too fast. In one way this makes sense, on the other hand
we already have too many states and should remove some variables
2011-02-17 19:34:28 +01:00
5e5758c783
log: Improve some logging messages across several files.
2011-02-17 19:34:28 +01:00
7c6feca7cf
m2ua: Do nothing on a reset request for now.
...
Only restart the link test on this link in case the link
is present and we need to do things. The link up/down should
be controlled in a different way.
2011-02-17 19:34:28 +01:00
8fd28dbbe6
m2ua: Keep the M2UA ASP state in the mtp_m2ua_link
...
This change allows to run multiple links over the same SCTP
connection or multiple SCTP connections. It does not yet
support fail over handling or load balancing but that seems
possible now.
2011-02-17 19:34:28 +01:00
41df6c5978
m2ua: Include the interface identifier in the notify message
2011-02-17 19:34:28 +01:00
5a34c7f6f8
mtp: Rename link_no to nr, add a name like for the other commands
2011-02-17 19:34:28 +01:00
6c0b2e570c
mtp: Make the mtp_link point to a specific type of link
...
We might want to be able to change the type of a link at
runtime. Decouple the link and the actual type of the link.
2011-02-17 19:34:28 +01:00
ea247c1d0a
vty: Move link commands from the name to the linkset number
2011-02-17 19:34:28 +01:00
1b5d846b46
mtp: Stop hardcoding the supported SSN inside the mtp_layer3.c
...
Stop hardcoding the supported ssn's inside the mtp_layer3.c and
make it possible to allow to configure this in the future.
2011-02-17 19:34:28 +01:00
b27c9626e8
mtp: Remove the bsc pointer from the MTP LinkSet
2011-02-17 19:34:28 +01:00
a33b23f293
mtp: Rename no to nr to align with the rest of the structs
2011-02-17 19:34:28 +01:00
4096d12ee0
bsc: Print the talloc allocation report on SIGUSR1
2011-02-17 19:34:28 +01:00
5cd45e16ef
bsc: Move the signal handling code over to the bsc.c
2011-02-17 19:34:28 +01:00
2d4891ff8c
bsc: Move the option parsing into the common code in bsc.c
2011-02-17 19:34:28 +01:00
289436f8b6
bsc: Cleanup some fields and names
2011-02-17 19:34:28 +01:00
64b7d56dc0
ss7: Move all mtp linksets callbacks into the app layer
2011-02-17 19:34:28 +01:00
c5200fcb35
ss7: Move the linkset up/down into the ss7_app, move some code around
2011-02-17 19:34:27 +01:00
ab7c601118
ss7: Provide a way to start the application
2011-02-17 19:34:27 +01:00
a7bc3aafdc
ss7: Create a SS7 application that is responsible for the routing
2011-02-17 19:34:27 +01:00
2cdb73cf4a
msc: Move more state into the sccp_state.c
2011-02-17 19:34:27 +01:00
3d4d8c7b50
msc: Move the nat handling into the sccp_state for now
2011-02-17 19:34:27 +01:00
84ec8714b2
msc: Move the MSC Connection into a new header file
...
This is in preparation of splitting the MSC part and the
nat logic for the upcoming config rewriting.
2011-02-17 19:34:27 +01:00
f7ce2c6417
m2ua: Start to separate the SCTP code and M2UA to allow multiple links
...
We want to be able to support multiple links over different SCTP
connection and in the future also over the same connection. This
is the first step to separate the SCTP connection handling from the
link handling inside these messages.
2011-02-17 19:34:27 +01:00
694337f893
mtp: Allow to find a linkset by number
2011-02-17 19:34:27 +01:00
599c9a4b9a
mtp: Allocate the MTPLinkSet as a child of the BSC
...
In preparation of the VTY code change, make the mtp linkset
a child of the bsc.
2011-02-17 19:34:27 +01:00
2ff47b8606
bsc: Allocate the bsc with talloc instead
...
Allocate the bsc with talloc to have a nice root context for
everything in the system.
2011-02-17 19:34:27 +01:00
1927e638e1
m2ua: Close a huge memory leak in the m2ua code.
2011-02-17 19:34:27 +01:00
b187049925
vty; Remove the lac/mnc/mcc option as this was never implemented
2011-02-17 19:34:27 +01:00
dd32ae5403
msc: The udt_relay could be implemented with the normal cellmgr now
...
Simplify the code and remove the standalone udt_relay application,
the job can be done with cellmgr_ng. This will happen after we have
settled for a new config file format.
2011-02-10 20:09:09 +01:00
cea4518410
msc: In forward_only mode never ask any of the connection tracking code
...
For the forward only code we never want to go through the other
cases, make sure to always return.
2011-02-10 20:09:09 +01:00
7ca2b03aa6
bsc: Remove the m2ua_set pointer from the struct as well
2011-02-10 20:09:09 +01:00
89fa11af02
bsc: Remove the global link_set pointer from the bsc
...
Start removing the static names for the linkset
2011-02-10 20:09:09 +01:00
43b015a8ea
bsc: Move the connection tracking code out of main file
2011-02-10 20:09:09 +01:00
bf5eada0aa
bsc: Stop using the bsc.link_set directly
2011-02-10 20:09:09 +01:00
e86c02e107
bsc: Move the BSC<->MSC variables to a new struct.
...
Move the MSC related information out of the bsc_data and update
the code to use this BSC configuration. This is greatly cleaning
up the code and in theory there might now be two BSC and two MSCs
that one application can handle (minus the missing VTY config)
2011-02-10 20:09:09 +01:00
ee63d7d15e
stp: Allow/Disallow to inject messages on the UDP/M2UA interface
2011-02-10 20:09:08 +01:00
0452f22a21
stp: Add code that allows to inject messages on any linkset
...
This can be useful to test out certain messages without having
any of the linksets be fully connected. It is not possible to
get the result. In the future this code should reply with an
M2UA error message if something went wrong.
2011-02-10 20:09:08 +01:00
6b71fd6192
vty: Fix the help and the parameters for the trace command
2011-01-31 22:41:03 +01:00
f603f28488
isup: Make it possible for the STP to handle/not handle ISUP messages
...
Add an option to decide if we should handle GROUP BLOCK and RESET
messages inside the STP or if we should forward those as well.
2011-01-30 00:24:15 +01:00
d3f412bbd5
mtp: Turn error messages into full sentences.
...
Turn the error messages into full sentences that
end with a full stop. Try to put the link set name
and the link number into these messages.
2011-01-28 18:52:16 +01:00
309d79f5ed
mtp: Forbid link up/failure on blocked links.
2011-01-28 18:26:20 +01:00
86a2a53b90
udp: Use link up/down signals from the MIB for the link
...
The mib was patched to send link up/down in case of failures,
only put a link service when the MIB tells us the link is
up, the failure case should only happen for remote links
failing. We will reset and go through link alignment.
2011-01-28 18:23:07 +01:00
122d604838
mgcp: Turn the endpoint-offset into a proper config option
2011-01-26 13:20:32 +01:00
1cf3a83780
mgcp: Make it possible to control the offset from Endpoint to CIC
2011-01-26 12:51:22 +01:00
38d936a445
mtp: Assign a name to linkset, use this name in the log messages
2011-01-26 12:41:42 +01:00
c5562bde48
sctp: Close the socket if we get <= 0 as a result for sctp_rcvmsg
...
The manpage says that -1 is the indication for error but on 2.6.12
we just ended up in a infinite loop as select shows the socket as
readable but a recvmsg does not give any data.
2011-01-26 11:02:42 +01:00
44f848b086
mgcp: Merge from master to respond to a RQNT
2011-01-25 23:43:55 +01:00
fd5d8d2ac1
mtp: Send the TFP/TRA/TFA with the first SLS provided by that link
2011-01-25 13:38:28 +01:00
7d336a55ed
mtp: Make SCCP tfa/tra/tfp messages work on the linkset
...
This will be used to send the data with the right SLS from
the right link of the linkset.
2011-01-25 13:38:27 +01:00
1ec2a749f0
mtp: Remember the first SLS this link is on
2011-01-25 13:38:27 +01:00
4c8ddb356c
vty: Fix the up/down of the MSC link
2011-01-25 13:18:59 +01:00
8a96e474a2
mtp: Fix the logic... close the socket if we are blocked
...
Thinko or such.
2011-01-25 09:57:55 +01:00
3c2b84c607
vty: Show the SLC mapping of a linkset
2011-01-24 21:20:34 +01:00
326a1f7310
stats: Fix counting incoming packets from a link
2011-01-24 20:52:30 +01:00
9543f4a356
mtp: Call it mtp_link_submit and use it in mtp_link
...
Remove the _set from the API, call it from the mtp_link.c. This
will fix the statistics for outgoing packets.
2011-01-24 20:49:58 +01:00
3a1c0af868
udp: Create a SNMP session per UDP
...
We do not have the multiple callbacks from SNMP under control
and we can only save the last request if the SNMP Session is
inside the link. This is mostly a workaround for Net-SNMP and
the missing documentation on the async functionality.
2011-01-24 20:21:11 +01:00
4e2e242d70
mtp: Show blocked links as blocked in the vty stat
2011-01-24 16:14:26 +01:00
315ec675ba
mtp: Implement VTY routines to block,unblock,reset a link
...
This can help in link management and reconfiguration of a
link at runtime. It is also a good engineering mode for
multiple linksets.
2011-01-24 16:14:25 +01:00
ea5ce23d72
mtp: Make it possible to block a link.
...
The semantic of a block is to take the physical
link down, call mtp_link_down and to make sure
that the link remains down and no packets are
forwarded there. The unblock call will reset the
link and this should get it back into operation
again.
2011-01-24 15:35:08 +01:00
8ade9b7bc2
pcap: Fix stupid bug and unbreak pcap writing
2011-01-23 16:18:18 +01:00
fca7b12e0d
vty: Install the vty logging commands
2011-01-22 23:19:44 +01:00
16b07c645b
pcap: Dump each packet in the DCAP category
2011-01-22 23:19:27 +01:00
0292127467
debug: Set the right debug area for the M2UA code
2011-01-22 23:05:03 +01:00
5c2e458dca
debug: Add two categories to be used in the future.
2011-01-22 22:57:42 +01:00
1b47ce5b9b
stat: Dump a name next to the OPC
2011-01-22 21:33:18 +01:00
5b2fe8d45b
pcap: Allow to start tracing on a specific linkset after app start
...
Allow to start to trace on a specific linkset after the application
has been started. This allows to stop tracing on a linkset as well.
2011-01-22 21:33:18 +01:00
f6375b49d3
pcap: Allow to log on a link or linkset level
2011-01-22 21:33:18 +01:00
36260e915a
pcap: Classify the direction of such a message
2011-01-22 21:33:18 +01:00
ddf8eae7da
pcap: Run all pcap operations through one method
2011-01-22 21:33:11 +01:00
c6bfa27b5e
udp: Allow to create multiple links via UDP
...
This is the easiest way to support multiple links over UDP.
Specify the number you want and they will be initiated. All
these links will run via the same UDP port.
2011-01-22 17:24:06 +01:00
0b31622482
vty: Print the MSC status on the VTY for relay/cellmgr
2011-01-22 16:43:14 +01:00
a310e53243
vty: Classify the application that we run and provide different options
...
The VTY interface is used for three different application and not
every option will make sense for every app. In the long run we will
split the vty interface but for now we just qualify the application.
2011-01-22 16:34:16 +01:00
60af5dd57a
stats: Print some statistics about the state of the current set
2011-01-22 16:22:18 +01:00
51b9e7a396
stats: Implement VTY command to dump the linksets
2011-01-22 16:22:18 +01:00
4c1eb0ee43
stats: Count packets on a per link level
2011-01-22 16:22:18 +01:00
c5d897e847
stats: Collect statistics on the linkset
...
Collect incoming, in sccp, in isup, out isup, out sccp packets.
This does not yet work for out in total.
2011-01-22 16:22:18 +01:00
aafa7c788e
stats: Add rate_counter for more statistics on the MTP side
2011-01-22 16:22:18 +01:00
eab20964b2
udp: Make the SNMP code asynchronous
...
Do not block the application when doing a SNMP request. Work
with the results coming back from the callback. Right now a
link can only be taken down and up.
2011-01-21 19:40:49 +01:00
4da421da6f
udp: Make two snmp functions internal
2011-01-21 18:01:37 +01:00
083a30b9b8
udp: Poll SNMP for timeouts and fd every 100ms
...
This is the easiest way to integrate net-snmp with the event loop,
every 100ms we are going to check for timeouts or incoming messages
2011-01-21 18:01:36 +01:00
f38114eee2
udp: Allow to run multiple links through the same socket
...
The UDP socket will be shared between multiple links, the
snmp session will be also shared between multiple links on
the same hardware.
2011-01-21 18:01:36 +01:00
e250ac3f4b
msc: Fix crash due pong timeout started from a msc reset
...
This is fixing a crash that is caused by the MTP link going
down/up and the main routines asking to send a reset to the
MSC. The sending of a reset is triggering the ping/pong
timeouts. In case there is no MSC connection we could crash.
2011-01-21 12:58:08 +01:00
050577a088
mtp: Return SLTA on the same SLS, send SLTM with a static sls
...
Derive the SLS from the static link_no we have assigned.
2011-01-20 19:28:15 +01:00
95057b9237
mtp: Send the SLTM/SLTA on the link directly
...
For both the SLTM that the app is sending and the SLTM we
are receiving we don't want to go through the SLC.
2011-01-20 19:07:16 +01:00
1cc24561b0
mtp: Count the links in a linkset
2011-01-20 19:07:16 +01:00
fa8cf2d938
mtp: Create a method for a link failure to restart the link.
...
Make sure that a failed link will be restarted by calling the
reset method which should take the link down.
2011-01-20 19:07:16 +01:00
9b8a4a7f49
mtp: Remove the unused linkset_sccp_down routine as it is not used
2011-01-20 19:07:16 +01:00
a8ce061d86
mtp: Move the link testing into a new file for mtp_link
...
The link testing should work under the linkset and if the
SLTM is failing the link should be taken down and it should
be restarted.
2011-01-20 19:07:16 +01:00
2d845fca0c
mtp: Rename the the_link to set as it is a link set
2011-01-20 15:44:14 +01:00
b4b747d7f7
mtp: Stop assigning the link_set it will be done in mtpl3
2011-01-20 15:39:40 +01:00
1349584c26
mtp: Start the linktest directly
...
No need for delaying the linktest, start it directly when
the linkset should come up
2011-01-20 15:08:57 +01:00
606eae8ece
mtp: Send the TFP/TRA once the first link is available
...
Instead of sending SCCP TFP/TRA as a response to a TRA
the code will now send one as a response to the first
SLTA we receive in the linkset on the first link.
2011-01-20 14:23:10 +01:00
157de2a8ab
mtp: Only respond to regular maintainenance for our code point
2011-01-20 13:11:29 +01:00
69e71e0670
isup: Attempt a short cut in the link bring up by sending a unblock
...
Attempt to unblock all circuits after the Gateway has blocked them. In
the ISUP spec we would need to go through the continuity test and such.
2011-01-20 11:49:39 +01:00
8f6eb5e688
isup: Handle a CGB with a CGBA and claim all circuits to be blocked
...
This is to help the Exchange B to go through the start procedure.
2011-01-20 11:49:39 +01:00
ecd835500e
isup: Make status parsing and status response be generic
2011-01-20 11:49:39 +01:00
6e11bee8cf
isup: Attempt to handle a RSC on the exchange
2011-01-20 11:49:39 +01:00
d8a73e24d2
isup: Allow to have a different OPC for ISUP messages.
2011-01-20 11:49:39 +01:00
a4661fb228
isup: Fix the lebgth check in this packet
2011-01-20 11:49:39 +01:00
cfbe80febb
mtp: Send a TFA for the point codes we are routing to.
2011-01-20 11:37:50 +01:00
adf7692031
mtp: Send TRA messages on all affected point codes
2011-01-20 11:37:50 +01:00
27c5e2357f
mtp: Send the TFP for every POC we want to handle.
2011-01-20 11:37:50 +01:00
bee2ed18c7
mtp: Make the input path work on a specific link of the linkset
2011-01-20 11:37:50 +01:00
84899a484c
stp: Set the pcap fd properly... WIP merge this
2011-01-20 11:37:50 +01:00
efbd8c2e80
stp: Allow to forward all ISUP messages without any modification
2011-01-20 11:37:50 +01:00
1b6901ec4a
stp: Forward unhandled ISUP from one end to another
2011-01-20 11:37:50 +01:00
9cf11bc109
stp: Create a M2UA link by hand and connect the SCCP routines
...
This is a hacked version that will just forward SCCP from one
linkset to another one. It is missing configuration and ISUP.
2011-01-20 11:37:50 +01:00
a93b83bf99
stp: Begin to implement a signalling transfer point
...
This is creating a new application that will be a signalling
transfer point. Right now it is a stripped down version of
the udt_relay, which is a stripped down version of cellmgr_ng.
2011-01-20 11:37:50 +01:00
92affdad72
mtp: Do not send anything in case the there is no link
...
If there is no usable link in the linkset we should not try
to send. This assumes that all incoming packages come from
links that are up. We do not check this right now but we
will have to check this.
2011-01-20 11:37:49 +01:00
101cd0bc83
mtp: Send the SSA/SSP for the apoc and assn of the request
2011-01-20 11:37:49 +01:00
df8597aeea
mtp: Send the SSA with the affected POC for SCCP.
2011-01-20 11:37:49 +01:00
c17852ee34
m2ua: Write MTP packets to the pcap file if requested.
2011-01-20 11:37:49 +01:00
d70a7e8e79
m2ua: Create a MTP Link class using SCTP/M2UA for the transport
...
This is a MTP Link that can be used with a MTP LinkSet. E.g. with
some config changes one could use cellmgr_ng or udt_relay over a
M2UA link.
2011-01-17 14:45:15 +01:00
0e2f9116f8
mtp: Rename link_data to mtp_link and move out the transport specific things
...
Rename link_data to mtp_link and move it into the mtp_data header
file, also remove the union to ease creating more of the subtypes.
This is done in preparation to the linkset knowing more about the
link (e.g. having a link test per link instead of per link).
2011-01-17 14:11:26 +01:00
d91f94024e
mtp: Create the SLC with all links
2011-01-17 11:27:32 +01:00
0f833b084b
mtp: take the linkset down when the last link is failing
2011-01-17 11:27:01 +01:00
85e17d1224
mtp: Remove the forced_down as it is never read in that application
2011-01-17 11:27:00 +01:00
fe72c160e2
mtp: Turn the MTPl2 link into a list of links.
2011-01-17 11:27:00 +01:00
069e635413
mtp: Keep an array for the SLS -> SLC mapping for active links.
2011-01-17 11:21:12 +01:00
644aafbc94
mtp: Make the link_data be a child of the link_set
...
Change the order of the link and linkset. The link will be
below the linkset. This change should make it more easy to
introduce multiple linksets.
2011-01-17 11:21:11 +01:00
c8405692b3
mtp: Propagate link and linkset failures in two stages
...
Handle a single link failure in links.c and if all the
links have failed propagate it up. This is preparing the
multiple links support.
2011-01-17 11:21:11 +01:00
569f1e171d
mtp: Rename mtp_link to mtp_link_set as this is the linkset
...
The link_udp is actually below the linkset. We need to get this
right now and then can have multiple links.
2011-01-17 11:21:11 +01:00
346e1c4bc4
mtp: Attempt to select the sls properly in the round robin fashion
...
When we call the submit method with a SLS of -1 we will try
to find the next SLS to do things in a round robin way.
2011-01-17 11:21:10 +01:00
45738887be
mtp: Kill the link variable from the mtp link.
2011-01-17 11:21:10 +01:00
b6edf97481
linkset: Prepare the UDP support to support multiple links.
2011-01-17 11:21:10 +01:00
016ba29ec2
msc: Remove the msc_clear_queue now that it is not needed
2011-01-17 11:21:10 +01:00
f19afaed7b
sccp: Stop queueing messages between SLTM messages
...
Remove the queueing of messages that was added during a debugging
session and should not be needed. This will simply bringing down
the linkset.
2011-01-17 11:21:09 +01:00
a99b04b700
mtp: Move the link code into a new file called links.
2011-01-17 11:21:09 +01:00
f9b4a86e8d
misc: Remove the link_c7 dummy methods
2011-01-17 11:21:09 +01:00
de56c22702
license: Switch to the GNU AGPLv3 for this network service
2011-01-16 20:35:13 +01:00
ea853044c8
mgcp: Merge from master. Fix some issues with the new code
2011-01-07 11:38:00 +01:00
7e0936ee52
mgcp: Merge new mgcp_protocol to parse digital trunks.
2011-01-06 19:50:32 +01:00
7a72556577
mtp: Allow to have a different POC for SCCP
2011-01-01 13:34:58 +01:00
ff9cd6f8f6
mtp: Well we do not wait for the SST any more but start transmitting.
2010-12-31 21:47:14 +01:00
0945961af3
mtp: Add some SSNs we want to handle.
...
This should be really configurable. SSN=1 should always lead to a
SSA, the others depend on what we run on our end of the link.
2010-12-31 16:54:04 +01:00
80ab4c6066
mtp: Implement the subsystem test and respond with a SSP/SSA
...
The SCMG handling should be moved to a different file. Right
now the list of supported SSNs is not configurable but it should.
2010-12-31 13:40:19 +01:00
eefd72cd74
mtp: Remove the flood feature as the issue has been debugged
...
The issue with paging messages with a PointCode and the too
long queue has been fixed by rewriting the header.
2010-12-20 17:24:23 +01:00
882082c1f6
mgcp: Fix the adaptation name for the config options
2010-12-20 17:21:26 +01:00
2c472a3f7b
mgcp: Fix the management objects
2010-12-20 17:21:26 +01:00
d10a3c1b4a
mtp: Attempt to fix the SCCP restart logic.
...
The SST is not necessary. We will have to assume the link is
established after having gotten the TRA on the Affected Point Code
and we will need to always handle the restart allowed.
2010-12-10 13:22:46 +01:00
3aad776b28
isup: Respond to a ISUP GRS with a GRA.
2010-12-10 13:22:46 +01:00
433ea2f037
isup: Implement handling GRS and GRA messages for ISUP.
2010-12-10 13:22:46 +01:00
c21cfaa023
isup: Start parsing the ISUP messages
...
Introduce a ISUP debug category, parse the reset circuit
message, add a test case for this easy parsing.
2010-12-10 13:22:46 +01:00
ae7418177e
mtp: Print a TFP message on the screen when we get a message
2010-12-08 11:28:12 +01:00
3a80cb2593
mtp: Prepare ISUP handling, just print the ISUP part.
2010-12-08 11:12:46 +01:00
1291ce5f8c
mtp: Print un-handled messages
2010-12-08 11:10:34 +01:00
8220b94064
udt_relay: Remove the abort and return a NULL pointer after a message
2010-12-08 10:08:40 +01:00
396282ef8e
udt_relay: Initialize the ni_ni as well here
2010-12-08 10:08:14 +01:00
8fa8e584dd
mgcp: Add config options for some GAIN options, apply them.
2010-12-01 23:45:22 +01:00
3bbb58bfdb
mtp: Group all MTP settings together.
2010-11-26 21:25:38 +01:00
b38b33b884
mtp: Make the spare/ni configurable
2010-11-26 21:21:04 +01:00
e976df1b5b
mtp: Be able to set the spare bits in the network indicator
2010-11-26 21:07:11 +01:00
4e3e28e916
mtp: Store the NetworIndicator in the mtp_link and use it
...
Prepare to make the ni configurable and store it inside the
mtp_link where it can be changed by the user of the mtp_link.
Initialize this to the current value.
2010-11-26 21:05:39 +01:00
2a9bf2b615
mtp: Set the network indicator in the mtp_msg_alloc
...
Prepare to have different network indicators.
2010-11-26 21:01:58 +01:00
7694381f52
udt: Add a forward_only to the bsc struct and use it for the msc_conn
...
Simply forward everything, no need for inspecting things.
2010-11-16 11:16:37 +01:00
594ee9a8c4
udt_relay: Add a forked copy of main to just relay messages
...
Do not run any of the header rewriting for messages. This will
simply relay SCCP friends to the MTP library. Some work on msc_conn.c
is needed to avoid calling most of it.
2010-11-16 11:03:19 +01:00
ed3046339e
mgcp: Print the extra settings from the config
2010-10-27 19:33:06 +02:00
d25dfce4f5
assignment: An evil hack to include some fake IES..
...
Add stuff to the message...
2010-10-27 15:59:33 +02:00
e3abeb1400
mgcp: Assume that on a MDCX all data is present...
...
Send a dummy packet on each MDCX message. This assumes
that the remote address is available by then and this
should fix not hearing the ringtone as the NAT didn't
know to which port to forward the data.
2010-10-18 19:37:32 +02:00
5d930f8745
mtp: Store the mtp_link inside the connection
...
Prepare to have multiple links to the BSC.
2010-10-08 23:18:15 +08:00
dedb7ce3fe
mtp: Ignore the spare bits as of Q.701 6.2
...
The sender is supposed to set them to 0 and we are asked
to ignore them. Apparently something called SIF is enabled
on the sender side.
2010-10-08 17:49:24 +08:00
5228069365
ussd: Pass the bsc_data to have access to the USSD message
2010-10-06 16:09:25 +08:00
dfcf2df698
ussd: Create the hook where packages from the MSC pass by
2010-10-06 06:20:35 +08:00
a4ca6d3947
msc: Create a function to send or queue messages.
2010-10-06 04:51:44 +08:00
0f349f2c6d
ussd: Add the hook where we can capture the Location Updating Request
2010-10-06 04:39:08 +08:00
377ba4293a
msc: Return an error if we close the fd
2010-10-01 20:37:40 +08:00
98f6dd5cdc
msc: Stop the msc reconnect timer as well (possible bfd corruption fix)
...
It appears that we run into a PING timeout before we have received
the first message and then will try to close the connection tiwce.
Stop the msc_timeout when we close down the connection.
2010-10-01 20:30:53 +08:00
4776571989
bsc_ussd: Add a dummy USSD module...used for welcome SMS
2010-09-30 17:45:12 +08:00
35948551fd
bsc: Move more sccp code into the bsc_sccp.c
2010-09-30 17:30:50 +08:00
1cb634a1e2
bsc: Refactor and move SCCP ConTrack to bsc_sccp.c
...
Move the code, update Makefile.am, add includes.
2010-09-30 16:10:17 +08:00
0e4e35fdd6
bsc: Be able to configure the LAC/MNC/MCC...
2010-09-30 03:04:28 +08:00
b3e1068992
sccp: Move the SCCP connection out to a new structure.
2010-09-30 01:57:45 +08:00
fdae5c9a7d
vty: Add a telnet interface to the cellmgr
2010-09-30 01:01:03 +08:00
2656e8f4aa
vty: Implement writing the config file
2010-09-30 00:41:37 +08:00
7942abc95d
vty: Move the vty code to a new file, move config params.
2010-09-30 00:34:46 +08:00
cdad4de330
mgcp: Only if this node is supposed to send data send a dummy packet
...
In case the gateway is configured as recvonly, do not send a dummy
load as this is against the policy.
2010-09-18 23:59:43 +08:00
b988caa160
mgcp: Be able to parse the 'M: sendonly' as the connection param
2010-09-18 20:23:05 +08:00
95cac74e37
mgw: Add a realloc_cb that will give up the old endpoint
...
Free the endpoint if we need to realloc, the sequencing
and blocking will take care of everything.
2010-09-18 03:16:52 +08:00
e40bc38c42
mgcp: Merge the realloc_cb from OpenBSC here.
2010-09-18 03:11:00 +08:00
33cdb7e027
mgcp: Add an option to force reallocating endpoints.
2010-09-17 22:03:47 +08:00
757f174e76
mgcp: Keep the data for the config in a global var again.
2010-09-17 22:03:08 +08:00
4bbfa274a4
Add a command to ask for the version number, generate a config file
2010-09-15 20:53:56 +08:00
5b08401701
mgcp: Use uint32_t for the CI in every place.
2010-08-08 07:51:51 +08:00
7b7c297c8f
msc: Separate the BSC and MSC link completly...
...
Make the msc_conn responsible for creating the link to
the core network and reopening it, make the BTS code just
call the msc methods and the MSC will throw away data in
case it can not be forwarded.
This avoids a problem that we start a reconnect timer
while we have a connection in progress and then add the
same file descriptor twice. This is mostly a speculative
fix to the problem.
2010-08-07 05:41:06 +08:00
e33d93c366
msc: Manage the msc_link_down only in the msc_conn.c
...
Only write to this property in the msc_conn context and
not from within the main procedure.
2010-08-07 02:40:35 +08:00
0c95c6ac93
msc: Rename closing to msc_link_down
...
This is the indicator if the MSC is connected and authenticated
or not. This name should be better than closing.
2010-08-07 02:39:37 +08:00
3e054ee556
msc: Use msc_clear_queue instead of custom clear code.
2010-08-07 02:32:44 +08:00
6258539928
msc: Use the msc_close_connection routine
...
Remove code duplication, the only difference is that the generic
callback pointer is not reset. But as we have lost the connection
we will go through the normnal connect again which will fix things.
2010-08-07 02:26:47 +08:00
71f4f355fa
msc: Use the msc function to clear the queue
2010-08-07 02:00:32 +08:00
43d9eec14b
msc: Make close_msc public, call it from main..
...
We would have not stopped the timer, fix that by only
having one function to close the connection to the msc.
2010-08-07 01:54:19 +08:00
d5918ff9e4
mgcp: Add an option to enable/disable vad and enable it by default
2010-08-07 00:19:07 +08:00
5fb30572a6
mgcp: Move the MGCP_NODE number into a public header file
2010-08-07 00:19:06 +08:00
Holger Hans Peter Freyther