You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This commit adds support for the bladeRF XB-200 transverter expansion board. To enable the expansion board and to allow the osmocom source or sink to tune down to 0Hz, parameter xb200 has to be set. XB-200 comes with 4 filter banks which can be selected by passing their name as a value of the xb200 parameter. Automatic filter selection will be enabled if no value is given to the xb200 parameter. Example: osmocom_fft -a bladerf,xb200 osmocom_fft -a bladerf,xb200=50M The following values are valid: "custom" : custom band "50M" : 50MHz band "144M" : 144MHz band "222M" : 222MHz band "auto3db" : Select fiterbank based on -3dB filter points "auto" : Select filerbank based on -1dB filter points (default)
|9 years ago|
|apps||9 years ago|
|cmake||9 years ago|
|docs||10 years ago|
|grc||9 years ago|
|include/osmosdr||9 years ago|
|lib||9 years ago|
|python||11 years ago|
|swig||10 years ago|
|AUTHORS||10 years ago|
|CMakeLists.txt||9 years ago|
|COPYING||11 years ago|
|README||9 years ago|
|gnuradio-osmosdr.pc.in||10 years ago|
While primarily being developed for the OsmoSDR hardware, this block
as well supports:
* FUNcube Dongle through libgnuradio-fcd
* FUNcube Dongle Pro+ through gr-fcdproplus
* sysmocom OsmoSDR Devices through libosmosdr
* RTL2832U based DVB-T dongles through librtlsdr
* RTL-TCP spectrum server (see librtlsdr project)
* MSi2500 based DVB-T dongles through libmirisdr
* gnuradio .cfile input through libgnuradio-blocks
* RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
* AirSpy Wideband Receiver through libairspy
* Great Scott Gadgets HackRF through libhackrf
* Nuand LLC bladeRF through libbladeRF library
* Ettus USRP Devices through Ettus UHD library
* Fairwaves UmTRX through Fairwaves' fork of UHD
By using the OsmoSDR block you can take advantage of a common software api in
your application(s) independent of the underlying radio hardware.
For installation and usage guidelines please read the documentation available
For the impatient :) a short excerpt:
The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed.
Before building the block you have to make sure that all the dependencies
(see list of supported devices above) you are intend to work with are
properly installed. The build system of gr-osmosdr will recognize them and
enable specific source/sink components thereafter.
Please note: prior pulling a new version from git and compiling it,
please do a "make uninstall" first to properly remove the previous version.
Building with cmake:
git clone git://git.osmocom.org/gr-osmosdr
sudo make install
NOTE: The osmocom blocks will appear under 'Sources' and 'Sinks' categories
in GRC menu.