forked from sdr/gr-osmosdr
6e75abf198
This change is intended to make the bladeRF source/sink implementations slightly more resilient to any transient issues in a flow graph. For poor choices of buffers/transfers or under high CPU load, an RX or TX operation might time out. Instead of immediately reporting WORK_DONE and bailing out, an error message is now printed and the device will attempt to continue transmitting/receiving samples. After 3 consecutive errors have occurred on an RX/TX operation, the device will report WORK_DONE; in this situation, something is likely very wrong. |
||
---|---|---|
apps | ||
cmake | ||
docs | ||
grc | ||
include/osmosdr | ||
lib | ||
python | ||
swig | ||
AUTHORS | ||
CMakeLists.txt | ||
COPYING | ||
README | ||
gnuradio-osmosdr.pc.in |
README
While primarily being developed for the OsmoSDR hardware, this block as well supports: * FUNcube Dongle through libgnuradio-fcd * FUNcube Dongle Pro+ through gr-fcdproplus * sysmocom OsmoSDR Devices through libosmosdr * RTL2832U based DVB-T dongles through librtlsdr * RTL-TCP spectrum server (see librtlsdr project) * MSi2500 based DVB-T dongles through libmirisdr * gnuradio .cfile input through libgnuradio-blocks * RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option) * AirSpy Wideband Receiver through libairspy * Great Scott Gadgets HackRF through libhackrf * Nuand LLC bladeRF through libbladeRF library * Ettus USRP Devices through Ettus UHD library * Fairwaves UmTRX through Fairwaves' fork of UHD By using the OsmoSDR block you can take advantage of a common software api in your application(s) independent of the underlying radio hardware. For installation and usage guidelines please read the documentation available at http://sdr.osmocom.org/trac/wiki/GrOsmoSDR For the impatient :) a short excerpt: The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed. Before building the block you have to make sure that all the dependencies (see list of supported devices above) you are intend to work with are properly installed. The build system of gr-osmosdr will recognize them and enable specific source/sink components thereafter. Please note: prior pulling a new version from git and compiling it, please do a "make uninstall" first to properly remove the previous version. Building with cmake: git clone git://git.osmocom.org/gr-osmosdr cd gr-osmosdr/ mkdir build cd build/ cmake ../ make sudo make install sudo ldconfig NOTE: The osmocom blocks will appear under 'Sources' and 'Sinks' categories in GRC menu.