Compare commits

...

1 Commits

Author SHA1 Message Date
Harald Welte 64063e2d72 Add debian packaging information 4 years ago
  1. 188
      debian/changelog
  2. 1
      debian/compat
  3. 79
      debian/control
  4. 195
      debian/copyright
  5. 6
      debian/gr-osmosdr.install
  6. 4
      debian/gr-osmosdr.manpages
  7. 1
      debian/libgnuradio-osmosdr0.1.4.install
  8. 224
      debian/osmocom_fft.1
  9. 222
      debian/osmocom_siggen.1
  10. 224
      debian/osmocom_siggen_nogui.1
  11. 196
      debian/osmocom_spectrum_sense.1
  12. 29
      debian/rules
  13. 1
      debian/source/format
  14. 3
      debian/watch

188
debian/changelog vendored

@ -0,0 +1,188 @@
gr-osmosdr (0.1.5git) unstable; urgency=medium
* Add initial support for Airspy HF+
* Support for FreeSRP via libfreesrp
-- Harald Welte <laforge@gnumonks.org> Sun, 03 Jun 2018 10:38:52 +0200
gr-osmosdr (0.1.4-14) unstable; urgency=medium
* Add initial support for Airspy HF+
* Support for FreeSRP via libfreesrp
-- A. Maitland Bottoms <bottoms@debian.org> Thu, 23 Nov 2017 10:38:52 -0500
gr-osmosdr (0.1.4-13) unstable; urgency=medium
* update to v0.1.4-98-gc653754
* rtl-sdr bias-T support
* build with gnuradio-3.7.11
-- A. Maitland Bottoms <bottoms@debian.org> Thu, 07 Sep 2017 19:50:05 -0400
gr-osmosdr (0.1.4-12) unstable; urgency=medium
* rebuild with airspy-host 1.0.9
-- A. Maitland Bottoms <bottoms@debian.org> Fri, 14 Oct 2016 20:58:28 -0400
gr-osmosdr (0.1.4-11) unstable; urgency=medium
* Add SoapySDR support
-- A. Maitland Bottoms <bottoms@debian.org> Sun, 28 Aug 2016 14:52:53 -0400
gr-osmosdr (0.1.4-10) unstable; urgency=medium
* build with gnuradio-3.7.10
-- A. Maitland Bottoms <bottoms@debian.org> Sun, 10 Jul 2016 12:41:34 -0400
gr-osmosdr (0.1.4-9) unstable; urgency=medium
* update to v0.1.4-72-g164a09f
* rebuild on kfreebsd (Closes: #822132)
-- A. Maitland Bottoms <bottoms@debian.org> Fri, 29 Apr 2016 05:10:35 -0400
gr-osmosdr (0.1.4-8) unstable; urgency=medium
* update to v0.1.4-67-gac15e78, build with gnuradio 3.7.9
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 13 Jan 2016 00:16:06 -0500
gr-osmosdr (0.1.4-7) unstable; urgency=medium
* Lintian cleanups pre-depends and dep5-copyright
-- A. Maitland Bottoms <bottoms@debian.org> Sat, 28 Nov 2015 22:57:30 -0500
gr-osmosdr (0.1.4-6) unstable; urgency=medium
* Don't depend upon hackrf on non-linux
-- A. Maitland Bottoms <bottoms@debian.org> Mon, 05 Oct 2015 00:25:01 -0400
gr-osmosdr (0.1.4-5) unstable; urgency=medium
* Rebuild with uhd 3.9.1-3
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 30 Sep 2015 21:06:49 -0400
gr-osmosdr (0.1.4-4) unstable; urgency=medium
* Tighten libuhd003 versioned dependency via dh_makeshlibs
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 30 Sep 2015 01:04:40 -0400
gr-osmosdr (0.1.4-3) unstable; urgency=low
* rebuild with uhd-3.9.1
* post gcc-5 libstdc++6 transition build (Closes: #791062)
-- A. Maitland Bottoms <bottoms@debian.org> Mon, 14 Sep 2015 20:51:16 -0400
gr-osmosdr (0.1.4-2) unstable; urgency=medium
* add watch file, rebuild with uhd-3.9.0
-- A. Maitland Bottoms <bottoms@debian.org> Thu, 10 Sep 2015 10:55:58 -0400
gr-osmosdr (0.1.4-1) unstable; urgency=medium
* New upstream, update to v0.1.4-48-g86ad584
build with gnuradio 3.7.8
-- A. Maitland Bottoms <bottoms@debian.org> Sun, 16 Aug 2015 21:55:38 -0400
gr-osmosdr (0.1.3-2) unstable; urgency=low
* Add versioned depends for bladerf (Closes: #759927)
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 10 Sep 2014 23:57:56 -0400
gr-osmosdr (0.1.3-1) unstable; urgency=low
* New upstream release
* build with gnuradio 3.7.5
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 03 Sep 2014 22:21:12 -0400
gr-osmosdr (0.1.2-1) unstable; urgency=low
* New upstream release, update to v0.1.2-2-g8604d76
* Include airspy support
* pkg-gr-osmosdr git for Debian packaging (Closes: #759268)
-- A. Maitland Bottoms <bottoms@debian.org> Thu, 28 Aug 2014 14:37:08 -0400
gr-osmosdr (0.1.1.4.ac95af2-1) unstable; urgency=low
* Update to v0.1.1-4-gac95af2
reverting 66109099 rtl: implement methods allowing runtime to control
sampling process
* Build with gnuradio 3.7.3 (Closes: #743392)
* Osmocom MiriSDR support
-- A. Maitland Bottoms <bottoms@debian.org> Sat, 19 Apr 2014 19:22:49 -0400
gr-osmosdr (0.1.0.55.80c4af-2~bpo70~1) wheezy-backports; urgency=low
* Rebuild for wheezy-backports.
-- A. Maitland Bottoms <bottoms@debian.org> Tue, 11 Feb 2014 16:57:11 -0500
gr-osmosdr (0.1.0.55.80c4af-2) unstable; urgency=low
* ship grc blocks
-- A. Maitland Bottoms <bottoms@debian.org> Fri, 03 Jan 2014 00:32:28 -0500
gr-osmosdr (0.1.0.55.80c4af-1) unstable; urgency=low
* New upstream commit, build with gnuradio 3.7.2.1
-- A. Maitland Bottoms <bottoms@debian.org> Tue, 31 Dec 2013 00:09:54 -0500
gr-osmosdr (0.1.0.11.04b4c8-3) unstable; urgency=low
* Fix up dependencies for current unstable build
-- A. Maitland Bottoms <bottoms@debian.org> Thu, 12 Dec 2013 12:05:35 -0500
gr-osmosdr (0.1.0.11.04b4c8-2) unstable; urgency=low
* drop bladerf dependency
-- A. Maitland Bottoms <bottoms@debian.org> Sat, 23 Nov 2013 11:25:21 -0500
gr-osmosdr (0.1.0.11.04b4c8-1) unstable; urgency=low
* New upstream snapshot (Closes: #726469)
* Match GNU Radio live distribution version
-- A. Maitland Bottoms <bottoms@debian.org> Tue, 08 Oct 2013 17:30:31 -0400
gr-osmosdr (0.1git59ceddb-1) unstable; urgency=low
* New upstream release, build with gnuradio 3.6.4.1-0wheezy1
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 01 May 2013 17:19:35 -0400
gr-osmosdr (0.1gitd11b7a-1) unstable; urgency=low
* New upstream git, build with gnuradio 3.6.3
-- A. Maitland Bottoms <bottoms@debian.org> Wed, 13 Feb 2013 15:56:33 -0500
gr-osmosdr (0.1git0f25dae-1) unstable; urgency=low
* New upstream git, build with gnuradio 3.6.2
-- A. Maitland Bottoms <bottoms@debian.org> Sun, 16 Sep 2012 20:47:39 -0400
gr-osmosdr (0.0git7f796fe-1) unstable; urgency=low
* New upstream git, build with gnuradio 3.6.0
-- A. Maitland Bottoms <bottoms@debian.org> Mon, 14 May 2012 20:28:18 -0400

1
debian/compat vendored

@ -0,0 +1 @@
9

79
debian/control vendored

@ -0,0 +1,79 @@
Source: gr-osmosdr
Section: libdevel
Priority: optional
Maintainer: Harald Welte <laforge@gnumonks.org>
Build-Depends: cmake,
debhelper (>= 9.0.0~),
dh-python,
doxygen,
gnuradio-dev (>=3.7.11),
gr-fcdproplus (>=3.7.25.4b6464b-3) [!hurd-i386],
gr-iqbal (>=0.37.2-8),
libairspy-dev (>= 1.0.9~) [!hurd-i386],
libairspyhf-dev [!hurd-i386],
libbladerf-dev (>=0.2016.01~rc1) [!hurd-i386],
libboost-dev,
libboost-system-dev,
libboost-thread-dev,
libfreesrp-dev [!hurd-i386],
libhackrf-dev [linux-any],
liblog4cpp5-dev,
libmirisdr-dev [!hurd-i386],
libosmosdr-dev [!hurd-i386],
librtlsdr-dev [!hurd-i386],
libsoapysdr-dev,
libuhd-dev (>=3.10),
pkg-config,
python-dev,
python-soapysdr,
swig
X-Python-Version: >= 2.7, << 2.8
Standards-Version: 4.1.0
Homepage: https://osmocom.org/projects/gr-osmosdr/wiki
Vcs-Git: git://git.osmocom.org/gr-osmosdr
Vcs-Browser: https://git.osmocom.org/gr-osmosdr
Package: gr-osmosdr
Architecture: any
Pre-Depends: ${misc:Pre-Depends}
Depends: ${misc:Depends}, ${python:Depends}, ${shlibs:Depends}
Recommends: gnuradio, gr-fosphor
Description: Gnuradio blocks from the OsmoSDR project
The Osmocom project is a family of projects regarding Open source
mobile communications.
.
While primarily being developed for the OsmoSDR hardware, this block
as well supports:
- FUNcube Dongle through libgnuradio-fcd
- FUNcube Dongle Pro+ through gr-fcdproplus
- sysmocom OsmoSDR Devices through libosmosdr
- RTL2832U based DVB-T dongles through librtlsdr
- RTL-TCP spectrum server (see librtlsdr project)
- MSi2500 based DVB-T dongles through libmirisdr
- gnuradio .cfile input through libgnuradio-blocks
- RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
- Great Scott Gadgets HackRF through libhackrf
- Nuand LLC bladeRF through libbladeRF library
- Ettus USRP Devices through Ettus UHD library
- Fairwaves UmTRX through Fairwaves' fork of UHD
- AIRSPY Receiver
- AIRSPY HF+ Receiver
- SoapySDR support
- Red Pitaya SDR transceiver (http://bazaar.redpitaya.com)
- FreeSRP through libfreesrp
.
By using the OsmoSDR block you can take advantage of a common
software API in your application(s) independent of the underlying
radio hardware.
Package: libgnuradio-osmosdr0.1.4
Section: libs
Architecture: any
Pre-Depends: ${misc:Pre-Depends}
Depends: ${misc:Depends}, ${shlibs:Depends}
Multi-Arch: same
Description: Gnuradio blocks from the OsmoSDR project - library
The Osmocom project is a family of projects regarding Open source
mobile communications.
.
This package contains the shared library.

195
debian/copyright vendored

@ -0,0 +1,195 @@
Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: gr-osmosdr
Upstream-Contact: http://sdr.osmocom.org/trac/wiki/rtl-sdr
Source:
git clone git://git.osmocom.org/gr-osmosdr
The upstream package source tarball was generated from the tag:
git archive --format=tar --prefix=gr-osmosdr-0.1.4/ v0.1.4 | xz > ../gr-osmosdr_0.1.4.orig.tar.xz
Comment:
Debian packages by A. Maitland Bottoms <bottoms@debian.org>,
.
Upstream Author:
Dimitri Stolnikov <horiz0n@gmx.net>
Copyright: 2012,2013 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: COPYING
Copyright: 2007 Free Software Foundation, Inc. <http://fsf.org/>
License: FSF-COPYING
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Files: CMakeLists.txt apps/* docs/* python/* include/osmosdr/api.h
cmake/Modules/* include/osmosdr/CMakeLists.txt
lib/CMakeLists.txt lib/gnuradio-osmosdr.rc.in
lib/bladerf/CMakeLists.txt swig/* grc/CMakeLists.txt
Copyright: 2005,2007-2013 Free Software Foundation, Inc.
Comment: GNU Radio gr_modtool derived
License: GPL-3+
Files: debian/*
Copyright: 2013 A. Maitland Bottoms <bottoms@debian.org>
License: GPL-3+
Files: grc/gen_osmosdr_blocks.py
Copyright: 2012 Free Software Foundation, Inc.
License: GPL-2+
Files: include/osmosdr/pimpl.h include/osmosdr/ranges.h lib/ranges.cc
include/osmosdr/time_spec.h lib/time_spec.cc
Copyright: 2010-2013 Ettus Research LLC
License: GPL-3+
FIles: lib/bladerf/bladerf_common.cc lib/bladerf/bladerf_common.h
lib/bladerf/bladerf_sink_c.cc lib/bladerf/bladerf_sink_c.h
lib/bladerf/bladerf_source_c.cc lib/bladerf/bladerf_source_c.h
Copyright: 2013 Nuand LLC
2013 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: lib/soapy/*
Copyright: 2015 Josh Blum <josh@joshknows.com>
2013 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: lib/freesrp/*
Copyright: 2017 by Lukas Lao Beyer
License: GPL-3+
Files: AUTHORS MANIFEST.md README gnuradio-osmosdr.pc.in
cmake/cmake_uninstall.cmake.in include/osmosdr/device.h
include/osmosdr/sink.h include/osmosdr/source.h
lib/arg_helpers.h lib/config.h.in lib/device.cc
lib/sink_iface.h lib/sink_impl.cc lib/sink_impl.h
lib/source_iface.h lib/source_impl.cc lib/source_impl.h
lib/airspy/* lib/fcd/* lib/file/* lib/hackrf/*
lib/miri/* lib/osmosdr/* lib/rfspace/* lib/rtl*
lib/sdrplay/* lib/uhd/*
Copyright: 2012-2013 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: lib/rtl_tcp/rtl_tcp_source_f.h
Copyright: 2012 Hoernchen <la@tfc-server.de>
License: GPL-3+
Files: lib/miri/miri_source_c.cc
Copyright: 2012 Steve Markgraf <steve@steve-m.de>
2012 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: lib/redpitaya/*
Copyright: 2015 Pavel Demin
2012,2015 Dimitri Stolnikov <horiz0n@gmx.net>
License: GPL-3+
Files: lib/freesrp/readerwriterqueue/*
Copyright: 2013-2015, Cameron Desrochers
Comment: libfreesrp includes ReaderWriterQueue
License: Simplified-BSD
All rights reserved.
.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
.
- Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Files: lib/freesrp/readerwriterqueue/atomicops.h
Copyright: 2015 Jeff Preshing
License: atomicops
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
.
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgement in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Files: cmake/Modules/CMakeParseArgumentsCopy.cmake
Copyright: 2010 Alexander Neundorf <neundorf@kde.org>
Comment: copy of CMakeParseArguments.cmake from cmake 2.8.x
License: Kitware-BSD
All rights reserved.
.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
.
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
.
* Neither the names of Kitware, Inc., the Insight Software Consortium,
nor the names of their contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
License: GPL-2+
GNU Radio Companion is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
.
GNU Radio Companion is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
.
On Debian systems, the complete text of the GNU General Public
License (GPL) version 3 can be found in the file
'/usr/share/common-licenses/GPL-2'.
License: GPL-3+
GNU Radio is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
.
GNU Radio is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
.
On Debian systems, the complete text of the GNU General Public
License (GPL) version 3 can be found in the file
'/usr/share/common-licenses/GPL-3'.

@ -0,0 +1,6 @@
usr/bin/*
usr/include/*
usr/lib/*/lib*.so
usr/lib/*/pkgconfig/*
usr/lib/python*
usr/share/*

@ -0,0 +1,4 @@
debian/osmocom_fft.1
debian/osmocom_siggen.1
debian/osmocom_siggen_nogui.1
debian/osmocom_spectrum_sense.1

@ -0,0 +1 @@
usr/lib/*/lib*.so.*

224
debian/osmocom_fft.1 vendored

@ -0,0 +1,224 @@
.TH osmocom_fft "1" "October 2013" "OSMOCOM" "User Commands"
.SH NAME
osmocom_fft \- Spectrum Browser
.SH SYNOPSIS
.B osmocom_fft
[\fIoptions\fR]
.SH DESCRIPTION
Spectrum Browser
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-a\fR ARGS, \fB\-\-args\fR=\fIARGS\fR
Device args, [default=]
.TP
\fB\-A\fR ANTENNA, \fB\-\-antenna\fR=\fIANTENNA\fR
Select RX antenna where appropriate
.TP
\fB\-s\fR SAMP_RATE, \fB\-\-samp\-rate\fR=\fISAMP_RATE\fR
Set sample rate (bandwidth), minimum by default
.TP
\fB\-f\fR FREQ, \fB\-\-center\-freq\fR=\fIFREQ\fR
Set frequency to FREQ
.TP
\fB\-c\fR FREQ_CORR, \fB\-\-freq\-corr\fR=\fIFREQ_CORR\fR
Set frequency correction (ppm)
.TP
\fB\-g\fR GAIN, \fB\-\-gain\fR=\fIGAIN\fR
Set gain in dB (default is midpoint)
.TP
\fB\-W\fR, \fB\-\-waterfall\fR
Enable waterfall display
.TP
\fB\-S\fR, \fB\-\-oscilloscope\fR
Enable oscilloscope display
.TP
\fB\-\-avg\-alpha\fR=\fIAVG_ALPHA\fR
Set fftsink averaging factor, default=[0.1]
.TP
\fB\-\-averaging\fR
Enable fftsink averaging, default=[False]
.TP
\fB\-\-ref\-scale\fR=\fIREF_SCALE\fR
Set dBFS=0dB input value, default=[1.0]
.TP
\fB\-\-fft\-size\fR=\fIFFT_SIZE\fR
Set number of FFT bins [default=1024]
.TP
\fB\-\-fft\-rate\fR=\fIFFT_RATE\fR
Set FFT update rate, [default=30]
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Use verbose console output [default=False]
.SH "SEE ALSO"
The full documentation for
.B linux;
is maintained as a Texinfo manual. If the
.B info
and
.B linux;
programs are properly installed at your site, the command
.IP
.B info linux;
.PP
should give you access to the complete manual.
.SH Device specification
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available right here.
.SH FCD Source
.TP
Argument
Notes
.TP
fcd=<device-index>
0-based device identifier, optional
.TP
device=hw:2
overrides the audio device
.TP
type=2
selects the dongle type, 1 for Classic, 2 for Pro+
.LP
The "device" argument overrides the audio device used by the underlying driver to access the dongle's IQ sample stream.
.LP
The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.
.SH OsmoSDR Source
.TP
Argument
Notes
.TP
osmosdr=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.SH RTL-SDR Source
.TP
Argument
Notes
.TP
rtl=<device-index>
0-based device identifier OR serial number
.TP
rtl_xtal=<frequency>
Frequency (Hz) used for the RTL chip, accepts eng notation
.TP
tuner_xtal=<frequency>
Frequency (Hz) used for the tuner chip, accepts eng notation
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.LP
NOTE: use rtl_eeprom -s to program your own serial number to the device
.LP
NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz
.SH RTL-SDR TCP Source
.TP
Argument
Notes
.TP
rtl_tcp=<hostname>:<port>
hostname defaults to "localhost", port to "1234"
.TP
psize=<payload-size>
Default is 16384 bytes
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.SH Miri Source
.TP
Argument
Notes
.TP
miri=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.SH UHD Source / Sink
Argument
Notes
.TP
uhd
Use this argument without a value
.TP
nchan=<channel-count>
For multichannel USRP configurations use the subdev parameter to specify stream mapping
.TP
subdev=<subdev-spec>
Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this
.TP
lo_offset=<frequency>
Offset frequency in Hz, must be within daughterboard bandwidth. Accepts eng notation
.LP
Additional argument/value pairs will be passed to the underlying driver, for more information see specifying the subdevice and common device identifiers in the Ettus documentation.
.SH bladeRF Source / Sink
.TP
Argument
Notes
.TP
bladerf[=0]
0-based device identifier (optional)
.TP
fw='/path/to/the/firmware.img'
program MCU firmware from given file. usually not needed. power cycle required.
.TP
fpga='/path/to/the/bitstream.rbf'
load FPGA bitstream from given file. required only at first run at the moment.
.SH HackRF Source / Sink
.TP
Argument
Notes
.TP
hackrf
Use this argument without a value
.TP
buffers=<number-of-buffers>
Default is 32
.LP
Only the first device found may be used at the moment because of libhackrf limitation.
.LP
Transmit support has been verified by using the crc-mmbTools DAB sdr transmitter.
.SH IQ File Source
.TP
Argument
Notes
.TP
file=<path-to-file-name>
.TP
freq=<frequency>
Center frequency in Hz, accepts eng notation
.TP
rate=<sampling-rate>
Mandatory, in samples/s, accepts eng notation
.TP
repeat=true|false
Default is true
.TP
throttle=true|false
Throttle flow of samples, default is true
.SH EXAMPLES
.LP
osmocom_fft -a rtl=0 -v -f 100e6 -s 2.4e6 -g 15
.LP
osmocom_fft -a hackrf -v
.LP
osmocom_fft -a uhd -v
.SH "SEE ALSO"
osmocom_siggen(1) osmocom_siggen_nogui(1) osmocom_spectrum_sense(1)

@ -0,0 +1,222 @@
.TH osmocom_siggen "1" "October 2013" "OSMOCOM" "User Commands"
.SH NAME
osmocom_siggen \- Signal Generator Application with GUI controls
.SH SYNOPSIS
.B osmocom_siggen:
[\fIoptions\fR]
.SH DESCRIPTION
Signal Generator Application with GUI controls
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-a\fR ARGS, \fB\-\-args\fR=\fIARGS\fR
Device args, [default=]
.TP
\fB\-A\fR ANTENNA, \fB\-\-antenna\fR=\fIANTENNA\fR
Select Rx Antenna where appropriate
.TP
\fB\-s\fR SAMP_RATE, \fB\-\-samp\-rate\fR=\fISAMP_RATE\fR
Set sample rate (bandwidth), minimum by default
.TP
\fB\-g\fR GAIN, \fB\-\-gain\fR=\fIGAIN\fR
Set gain in dB (default is midpoint)
.TP
\fB\-f\fR FREQ, \fB\-\-tx\-freq\fR=\fIFREQ\fR
Set carrier frequency to FREQ [default=mid\-point]
.TP
\fB\-c\fR FREQ_CORR, \fB\-\-freq\-corr\fR=\fIFREQ_CORR\fR
Set carrier frequency correction [default=0]
.TP
\fB\-x\fR WAVEFORM_FREQ, \fB\-\-waveform\-freq\fR=\fIWAVEFORM_FREQ\fR
Set baseband waveform frequency to FREQ [default=0]
.TP
\fB\-y\fR WAVEFORM2_FREQ, \fB\-\-waveform2\-freq\fR=\fIWAVEFORM2_FREQ\fR
Set 2nd waveform frequency to FREQ [default=none]
.TP
\fB\-\-sine\fR
Generate a carrier modulated by a complex sine wave
.TP
\fB\-\-const\fR
Generate a constant carrier
.TP
\fB\-\-offset\fR=\fIOFFSET\fR
Set waveform phase offset to OFFSET [default=0]
.TP
\fB\-\-gaussian\fR
Generate Gaussian random output
.TP
\fB\-\-uniform\fR
Generate Uniform random output
.TP
\fB\-\-2tone\fR
Generate Two Tone signal for IMD testing
.TP
\fB\-\-sweep\fR
Generate a swept sine wave
.TP
\fB\-\-gsm\fR
Generate GMSK modulated GSM Burst Sequence
.TP
\fB\-\-amplitude\fR=\fIAMPL\fR
Set output amplitude to AMPL (0.1\-1.0) [default=0.3]
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Use verbose console output [default=False]
.SH Device specification
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available right here.
.SH FCD Source
.TP
Argument
Notes
.TP
fcd=<device-index>
0-based device identifier, optional
.TP
device=hw:2
overrides the audio device
.TP
type=2
selects the dongle type, 1 for Classic, 2 for Pro+
.LP
The "device" argument overrides the audio device used by the underlying driver to access the dongle's IQ sample stream.
.LP
The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.
.SH OsmoSDR Source
.TP
Argument
Notes
.TP
osmosdr=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.SH RTL-SDR Source
.TP
Argument
Notes
.TP
rtl=<device-index>
0-based device identifier OR serial number
.TP
rtl_xtal=<frequency>
Frequency (Hz) used for the RTL chip, accepts eng notation
.TP
tuner_xtal=<frequency>
Frequency (Hz) used for the tuner chip, accepts eng notation
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.LP
NOTE: use rtl_eeprom -s to program your own serial number to the device
.LP
NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz
.SH RTL-SDR TCP Source
.TP
Argument
Notes
.TP
rtl_tcp=<hostname>:<port>
hostname defaults to "localhost", port to "1234"
.TP
psize=<payload-size>
Default is 16384 bytes
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.SH Miri Source
.TP
Argument
Notes
.TP
miri=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.SH UHD Source / Sink
Argument
Notes
.TP
uhd
Use this argument without a value
.TP
nchan=<channel-count>
For multichannel USRP configurations use the subdev parameter to specify stream mapping
.TP
subdev=<subdev-spec>
Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this
.TP
lo_offset=<frequency>
Offset frequency in Hz, must be within daughterboard bandwidth. Accepts eng notation
.LP
Additional argument/value pairs will be passed to the underlying driver, for more information see specifying the subdevice and common device identifiers in the Ettus documentation.
.SH bladeRF Source / Sink
.TP
Argument
Notes
.TP
bladerf[=0]
0-based device identifier (optional)
.TP
fw='/path/to/the/firmware.img'
program MCU firmware from given file. usually not needed. power cycle required.
.TP
fpga='/path/to/the/bitstream.rbf'
load FPGA bitstream from given file. required only at first run at the moment.
.SH HackRF Source / Sink
.TP
Argument
Notes
.TP
hackrf
Use this argument without a value
.TP
buffers=<number-of-buffers>
Default is 32
.LP
Only the first device found may be used at the moment because of libhackrf limitation.
.LP
Transmit support has been verified by using the crc-mmbTools DAB sdr transmitter.
.SH IQ File Source
.TP
Argument
Notes
.TP
file=<path-to-file-name>
.TP
freq=<frequency>
Center frequency in Hz, accepts eng notation
.TP
rate=<sampling-rate>
Mandatory, in samples/s, accepts eng notation
.TP
repeat=true|false
Default is true
.TP
throttle=true|false
Throttle flow of samples, default is true
.SH EXAMPLES
.LP
osmocom_siggen -a hackrf -f 100e6 --sine
.LP
osmocom_siggen -a hackrf -f 100e6 --sweep -x 2M -y 1 -c34
.SH "SEE ALSO"
osmocom_fft(1) osmocom_siggen(1) osmocom_spectrum_sense(1)

@ -0,0 +1,224 @@
.TH osmocom_siggen_nogui "1" "October 2013" "OSMOCOM" "User Commands"
.SH NAME
osmocom_siggen_nogui \- Signal generator application
.SH SYNOPSIS
.B osmocom_siggen_nogui:
[\fIoptions\fR]
.SH DESCRIPTION
Signal generator application
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-a\fR ARGS, \fB\-\-args\fR=\fIARGS\fR
Device args, [default=]
.TP
\fB\-A\fR ANTENNA, \fB\-\-antenna\fR=\fIANTENNA\fR
Select Rx Antenna where appropriate
.TP
\fB\-s\fR SAMP_RATE, \fB\-\-samp\-rate\fR=\fISAMP_RATE\fR
Set sample rate (bandwidth), minimum by default
.TP
\fB\-g\fR GAIN, \fB\-\-gain\fR=\fIGAIN\fR
Set gain in dB (default is midpoint)
.TP
\fB\-f\fR FREQ, \fB\-\-tx\-freq\fR=\fIFREQ\fR
Set carrier frequency to FREQ [default=mid\-point]
.TP
\fB\-c\fR FREQ_CORR, \fB\-\-freq\-corr\fR=\fIFREQ_CORR\fR
Set carrier frequency correction [default=0]
.TP
\fB\-x\fR WAVEFORM_FREQ, \fB\-\-waveform\-freq\fR=\fIWAVEFORM_FREQ\fR
Set baseband waveform frequency to FREQ [default=0]
.TP
\fB\-y\fR WAVEFORM2_FREQ, \fB\-\-waveform2\-freq\fR=\fIWAVEFORM2_FREQ\fR
Set 2nd waveform frequency to FREQ [default=none]
.TP
\fB\-\-sine\fR
Generate a carrier modulated by a complex sine wave
.TP
\fB\-\-const\fR
Generate a constant carrier
.TP
\fB\-\-offset\fR=\fIOFFSET\fR
Set waveform phase offset to OFFSET [default=0]
.TP
\fB\-\-gaussian\fR
Generate Gaussian random output
.TP
\fB\-\-uniform\fR
Generate Uniform random output
.TP
\fB\-\-2tone\fR
Generate Two Tone signal for IMD testing
.TP
\fB\-\-sweep\fR
Generate a swept sine wave
.TP
\fB\-\-gsm\fR
Generate GMSK modulated GSM Burst Sequence
.TP
\fB\-\-amplitude\fR=\fIAMPL\fR
Set output amplitude to AMPL (0.1\-1.0) [default=0.3]
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Use verbose console output [default=False]
.PP
Note: failed to enable realtime scheduling, continuing
.SH Device specification
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available right here.
.SH FCD Source
.TP
Argument
Notes
.TP
fcd=<device-index>
0-based device identifier, optional
.TP
device=hw:2
overrides the audio device
.TP
type=2
selects the dongle type, 1 for Classic, 2 for Pro+
.LP
The "device" argument overrides the audio device used by the underlying driver to access the dongle's IQ sample stream.
.LP
The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.
.SH OsmoSDR Source
.TP
Argument
Notes
.TP
osmosdr=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.SH RTL-SDR Source
.TP
Argument
Notes
.TP
rtl=<device-index>
0-based device identifier OR serial number
.TP
rtl_xtal=<frequency>
Frequency (Hz) used for the RTL chip, accepts eng notation
.TP
tuner_xtal=<frequency>
Frequency (Hz) used for the tuner chip, accepts eng notation
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.LP
NOTE: use rtl_eeprom -s to program your own serial number to the device
.LP
NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz
.SH RTL-SDR TCP Source
.TP
Argument
Notes
.TP
rtl_tcp=<hostname>:<port>
hostname defaults to "localhost", port to "1234"
.TP
psize=<payload-size>
Default is 16384 bytes
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.SH Miri Source
.TP
Argument
Notes
.TP
miri=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.SH UHD Source / Sink
Argument
Notes
.TP
uhd
Use this argument without a value
.TP
nchan=<channel-count>
For multichannel USRP configurations use the subdev parameter to specify stream mapping
.TP
subdev=<subdev-spec>
Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this
.TP
lo_offset=<frequency>
Offset frequency in Hz, must be within daughterboard bandwidth. Accepts eng notation
.LP
Additional argument/value pairs will be passed to the underlying driver, for more information see specifying the subdevice and common device identifiers in the Ettus documentation.
.SH bladeRF Source / Sink
.TP
Argument
Notes
.TP
bladerf[=0]
0-based device identifier (optional)
.TP
fw='/path/to/the/firmware.img'
program MCU firmware from given file. usually not needed. power cycle required.
.TP
fpga='/path/to/the/bitstream.rbf'
load FPGA bitstream from given file. required only at first run at the moment.
.SH HackRF Source / Sink
.TP
Argument
Notes
.TP
hackrf
Use this argument without a value
.TP
buffers=<number-of-buffers>
Default is 32
.LP
Only the first device found may be used at the moment because of libhackrf limitation.
.LP
Transmit support has been verified by using the crc-mmbTools DAB sdr transmitter.
.SH IQ File Source
.TP
Argument
Notes
.TP
file=<path-to-file-name>
.TP
freq=<frequency>
Center frequency in Hz, accepts eng notation
.TP
rate=<sampling-rate>
Mandatory, in samples/s, accepts eng notation
.TP
repeat=true|false
Default is true
.TP
throttle=true|false
Throttle flow of samples, default is true
.SH EXAMPLES
.LP
osmocom_siggen_nogui -a hackrf -f 100e6 --sweep -x 2e6 -y 10 -v
.LP
osmocom_siggen_nogui -a uhd,subdev=A:0 -f 100e6 --sweep -x 2e6 -y 10 -s 4e6 -v
.SH "SEE ALSO"
osmocom_fft(1) osmocom_siggen(1) osmocom_spectrum_sense(1)

@ -0,0 +1,196 @@
.TH osmocom_spectrum_sense "1" "October 2013" "OSMOCOMM" "User Commands"
.SH NAME
osmocom_spectrum_sense \- GNU Radio application from OsmoSDR
.SH SYNOPSIS
.B osmocom_spectrum_sense
[\fIoptions\fR] \fImin_freq max_freq\fR
.SH DESCRIPTION
GNU Radio application from OsmoSDR
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-a\fR ARGS, \fB\-\-args\fR=\fIARGS\fR
Device args [default=]
.TP
\fB\-A\fR ANTENNA, \fB\-\-antenna\fR=\fIANTENNA\fR
Select antenna where appropriate
.TP
\fB\-s\fR SAMP_RATE, \fB\-\-samp\-rate\fR=\fISAMP_RATE\fR
Set sample rate (bandwidth), minimum by default
.TP
\fB\-g\fR GAIN, \fB\-\-gain\fR=\fIGAIN\fR
Set gain in dB (default is midpoint)
.TP
\fB\-\-tune\-delay\fR=\fISECS\fR
Time to delay (in seconds) after changing frequency
[default=0.25]
.TP
\fB\-\-dwell\-delay\fR=\fISECS\fR
Time to dwell (in seconds) at a given frequency
[default=0.25]
.TP
\fB\-b\fR Hz, \fB\-\-channel\-bandwidth\fR=\fIHz\fR
Channel bandwidth of fft bins in Hz [default=6250.0]
.TP
\fB\-q\fR dB, \fB\-\-squelch\-threshold\fR=\fIdB\fR
Squelch threshold in dB [default=none]
.TP
\fB\-F\fR FFT_SIZE, \fB\-\-fft\-size\fR=\fIFFT_SIZE\fR
Specify number of FFT bins
[default=samp_rate/channel_bw]
.TP
\fB\-\-real\-time\fR
Attempt to enable real\-time scheduling
.SH Device specification
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available right here.
.SH FCD Source
.TP
Argument
Notes
.TP
fcd=<device-index>
0-based device identifier, optional
.TP
device=hw:2
overrides the audio device
.TP
type=2
selects the dongle type, 1 for Classic, 2 for Pro+
.LP
The "device" argument overrides the audio device used by the underlying driver to access the dongle's IQ sample stream.
.LP
The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.
.SH OsmoSDR Source
.TP
Argument
Notes
.TP
osmosdr=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.SH RTL-SDR Source
.TP
Argument
Notes
.TP
rtl=<device-index>
0-based device identifier OR serial number
.TP
rtl_xtal=<frequency>
Frequency (Hz) used for the RTL chip, accepts eng notation
.TP
tuner_xtal=<frequency>
Frequency (Hz) used for the tuner chip, accepts eng notation
.TP
buffers=<number-of-buffers>
Default is 32
.TP
buflen=<length-of-buffer>
Default is 256kB, must be multiple of 512
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.LP
NOTE: use rtl_eeprom -s to program your own serial number to the device
.LP
NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz
.SH RTL-SDR TCP Source
.TP
Argument
Notes
.TP
rtl_tcp=<hostname>:<port>
hostname defaults to "localhost", port to "1234"
.TP
psize=<payload-size>
Default is 16384 bytes
.TP
direct_samp=0|1|2
Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled
.TP
offset_tune=0|1
Enable offset tune mode for E4000 tuners
.SH Miri Source
.TP
Argument
Notes
.TP
miri=<device-index>
0-based device identifier
.TP
buffers=<number-of-buffers>
Default is 32
.SH UHD Source / Sink
Argument
Notes
.TP
uhd
Use this argument without a value
.TP
nchan=<channel-count>
For multichannel USRP configurations use the subdev parameter to specify stream mapping
.TP
subdev=<subdev-spec>
Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this
.TP
lo_offset=<frequency>
Offset frequency in Hz, must be within daughterboard bandwidth. Accepts eng notation
.LP
Additional argument/value pairs will be passed to the underlying driver, for more information see specifying the subdevice and common device identifiers in the Ettus documentation.
.SH bladeRF Source / Sink
.TP
Argument
Notes
.TP
bladerf[=0]
0-based device identifier (optional)
.TP
fw='/path/to/the/firmware.img'
program MCU firmware from given file. usually not needed. power cycle required.
.TP
fpga='/path/to/the/bitstream.rbf'
load FPGA bitstream from given file. required only at first run at the moment.
.SH HackRF Source / Sink
.TP
Argument
Notes
.TP
hackrf
Use this argument without a value
.TP
buffers=<number-of-buffers>
Default is 32
.LP
Only the first device found may be used at the moment because of libhackrf limitation.
.LP
Transmit support has been verified by using the crc-mmbTools DAB sdr transmitter.
.SH IQ File Source
.TP
Argument
Notes
.TP
file=<path-to-file-name>
.TP
freq=<frequency>
Center frequency in Hz, accepts eng notation
.TP
rate=<sampling-rate>
Mandatory, in samples/s, accepts eng notation
.TP
repeat=true|false
Default is true
.TP
throttle=true|false
Throttle flow of samples, default is true
.SH "SEE ALSO"
osmocom_fft(1) osmocom_siggen(1) osmocom_siggen_nogui(1)

29
debian/rules vendored

@ -0,0 +1,29 @@
#!/usr/bin/make -f
DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
export DEB_HOST_MULTIARCH
DEB_DEBIAN_DIR=$(dir $(firstword $(MAKEFILE_LIST)))
VER=$(shell dpkg-parsechangelog -l$(DEB_DEBIAN_DIR)/changelog \
| sed -rne 's,^Version: ([^-]+).*,\1,p')
GITREV=$(shell echo $(VER) | sed -rne 's,[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+\.([0-f]+),\1,p')
%:
dh $@ --with python2
override_dh_auto_configure:
dh_auto_configure -- -DLIB_SUFFIX="/$(DEB_HOST_MULTIARCH)" -DPythonLibs_FIND_VERSION:STRING="2.7" -DPYTHON_EXECUTABLE:STRING="/usr/bin/python"
override_dh_auto_install:
dh_auto_install
rm -f debian/gr-osmosdr/usr/lib/python2.7/dist-packages/osmosdr/*pyc
rm -f debian/gr-osmosdr/usr/lib/python2.7/dist-packages/osmosdr/*pyo
override_dh_makeshlibs:
dh_makeshlibs -V 'libgnuradio-osmosdr0.1.4 (>= 0.1.4-13)'
version-to-get:
echo $(VER) is $(GITREV)
get-orig-source: version-to-get
git clone git://git.osmocom.org/gr-osmosdr
cd gr-osmosdr && git archive --format=tar --prefix=gr-osmosdr-$(VER)/ $(GITREV) | xz > ../gr-osmosdr_$(VER).orig.tar.xz
rm -rf gr-osmosdr

@ -0,0 +1 @@
3.0 (native)

3
debian/watch vendored

@ -0,0 +1,3 @@
version=3
opts="downloadurlmangle=s/refs\/tags/snapshot/,uversionmangle=s|(.*)git|1|" \
http://cgit.osmocom.org/gr-osmosdr/refs/tags /gr-osmosdr/snapshot/gr-osmosdr-(\d.*)\.tar\.xz
Loading…
Cancel
Save