Commit Graph

15 Commits

Author SHA1 Message Date
Lukas Lao Beyer 5ecfa255d2 Add support for FreeSRP
This patch adds support for both receiving and transmitting using
the FreeSRP. More information on the FreeSRP can be found at:

http://freesrp.org

The gr-osmosdr blocks added make use of libfreesrp, the library
required for interfacing with this device. The libfreesrp source
code is freely available at

https://github.com/freesrp/libfreesrp

Usage example:

osmocom_fft -a "freesrp"
2017-04-18 23:48:08 +02:00
Dimitri Stolnikov 55fe961987 update documentation 2015-12-18 22:20:27 +01:00
Dimitri Stolnikov b226b85fa8 README: move sdrplay line to the same position as in grc template 2015-05-12 23:59:32 +02:00
SDRplay afed5df615 Added SDRplay RSP support
Initial build for SDRplay RSP support. Basic functionality, AGC etc. to
be added
2015-04-28 22:35:18 +02:00
Dimitri Stolnikov 154c4ddd5f airspy: add support for AirSpy wideband receiver
Requires https://github.com/airspy/host

Usage example:

osmocom_fft -a airspy

The following named gain stages are available:

LNA: 0 to 15, step 1
MIX: 0 to 15, step 1
IF: 0 to 15, step 1

At the moment the gains are not in dB but gain indices internal to R820t
tuner.
2014-02-09 20:18:10 +01:00
Dimitri Stolnikov 9c6ac9e3e3 rfspace: add support for RFSPACE SDR-IQ and SDR-IP
Usage example:

osmocom_fft -a sdr-iq=/dev/ttyUSB0
osmocom_fft -a sdr-ip=host[:port]
osmocom_fft -a netsdr=host[:port][,nchan=2]

The following named gain stages are available:

SDR-IQ: ATT: -20 to +10 dB, in 10dB steps
SDR-IP: ATT: -30 to 0 dB, in 10dB steps

The ftdi_sio driver is being used for SDR-IQ. It creates a character
device of the form:

crw-rw---- 1 root dialout 188, 0 Dec 19 22:14 /dev/ttyUSB0

To be able to open the device without root permissions add yourself to
the "dialout" group or do a "chmod 666 /dev/ttyUSB0" after pluggin in.
2013-12-22 16:28:27 +01:00
Dimitri Stolnikov a98e682693 add UmTRX to the list of supported devices
requires Fairwaves' port of the Ettus UHD library:

https://github.com/fairwaves/UHD-Fairwaves
2013-12-10 16:56:14 +01:00
Dimitri Stolnikov 8facbbcca1 netsdr: add support for RFSPACE NetSDR receiver
- implements broadcast UDP based device discovery
- prints device information (serial/versions) on startup
- reads available frequency range(s) from the device
- integrity checks of IQ stream using sequence numbers
- automatic bandpass or a wideband lowpass selectable

The following named gain stages are available:

ATT: -30 to 0 dB, in 10dB steps

Known limitations:

- setting the sample rate is possible only before the
  flowgraph has been started
2013-10-26 15:04:41 +02:00
Dimitri Stolnikov e5f7b28093 bladerf: add support for nuand LLC bladeRF (WIP)
This is based on the original work (https://github.com/Nuand/gr-osmosdr)
done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr.

The following modifications have been done in this commit:

* port to gr-osmosdr master codebase (gr3.7)
* moved shared properties to bladerf_common
* added & verified IF filter bandwidth setters
* set LMS6002D registers with values taken from FAQ 5.27
* print device information (serial/versions) on startup
* added fpga= and fw= device arguments to program MCU/FPGA
* added bladerf=# dev. arg. to select a specific bladeRF
* grc gain field controls RF path VGA for RX/TX
* grc BB gain field controls BB path VGA for RX/TX

Usage example:

osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf"

The following RX named gain stages are available:

LNA: 0 to 6 dB, in 3dB steps
VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib
VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB

The following TX named gain stages are available:

VGA1: -35 to -4 dB, in 1dB steps, BB side
VGA2: 0 to 25 dB, in 1dB steps, RF side

Thanks a lot to the team of nuand LLC for this major contribution.
2013-07-21 11:59:22 +02:00
Dimitri Stolnikov 3ce7c33981 fcd: add support for FUNcube Dongle Pro+
The gnuradio block https://github.com/dl1ksv/gr-fcdproplus must be
installed before building gr-osmosdr.

Available named gains:

Dongle Classic:

LNA: -5 to 30 dB, in 2.5 dB steps
MIX: 4 or 12 dB

Dongle Pro+:

LNA: 0 or 1, meaning off/on only. no information about real values.
MIX: 0 or 1, meaning off/on only. no information about real values.
BB: 0 to 59 dB, in 1 dB steps

This patch also introduces optional "device" and "type" arguments which
allow to override the values automatically picked by gr-osmosdr:

osmocom_fft -a "fcd,device=hw:2,type=2"

The "device" argument overrides the audio device used by the underlying
driver to access the dongle's IQ sample stream.

The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.

Thanks to Alexey Bazhin for the initial patch and Volker Schroer for
testing.
2013-07-14 12:09:55 +02:00
Dimitri Stolnikov e90ae9daa3 make OSMOCOM lowercase 2013-06-08 17:38:18 +02:00
Dimitri Stolnikov bbf06c7272 update README 2013-06-05 00:15:28 +02:00
Dimitri Stolnikov 3e6a24e5d9 convert to gnuradio 3.7 interface 2013-05-29 22:34:40 +02:00
Dimitri Stolnikov 4c101ea44c update README 2013-05-26 01:07:24 +02:00
Dimitri Stolnikov 0efd28de6b initial commit 2012-04-06 15:29:14 +02:00