7 Commits (9b386707d81ac8117a6c26011a757db40aa505ea)

Author	SHA1	Message	Date
Lukas Lao Beyer	5ecfa255d2	Add support for FreeSRP ... This patch adds support for both receiving and transmitting using the FreeSRP. More information on the FreeSRP can be found at: http://freesrp.org The gr-osmosdr blocks added make use of libfreesrp, the library required for interfacing with this device. The libfreesrp source code is freely available at https://github.com/freesrp/libfreesrp Usage example: osmocom_fft -a "freesrp"	6 years ago
Dimitri Stolnikov	da2cf6a6f2	cmake: update component name & update AUTHORS file	7 years ago
Pavel Demin	3582ba17e0	redpitaya: add support for Red Pitaya SDR transceiver ... This patch adds two gr-osmosdr blocks that can be used with the SDR transceiver application available from the Red Pitaya application marketplace: http://bazaar.redpitaya.com These new source and sink blocks are based on the file block with some pieces borrowed from the rtl_tcp block. More details about Red Pitaya SDR transceiver can be found at: http://pavel-demin.github.io/red-pitaya-notes/sdr-transceiver Usage example: osmocom_fft -a "redpitaya=192.168.1.100:1001" Signed-off-by: Pavel Demin <pavel.demin@uclouvain.be>	7 years ago
Dimitri Stolnikov	3793a5e8b1	updated AUTHORS	8 years ago
Dimitri Stolnikov	e5f7b28093	bladerf: add support for nuand LLC bladeRF (WIP) ... This is based on the original work (https://github.com/Nuand/gr-osmosdr) done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr. The following modifications have been done in this commit: * port to gr-osmosdr master codebase (gr3.7) * moved shared properties to bladerf_common * added & verified IF filter bandwidth setters * set LMS6002D registers with values taken from FAQ 5.27 * print device information (serial/versions) on startup * added fpga= and fw= device arguments to program MCU/FPGA * added bladerf=# dev. arg. to select a specific bladeRF * grc gain field controls RF path VGA for RX/TX * grc BB gain field controls BB path VGA for RX/TX Usage example: osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf" The following RX named gain stages are available: LNA: 0 to 6 dB, in 3dB steps VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB The following TX named gain stages are available: VGA1: -35 to -4 dB, in 1dB steps, BB side VGA2: 0 to 25 dB, in 1dB steps, RF side Thanks a lot to the team of nuand LLC for this major contribution.	10 years ago
Dimitri Stolnikov	625c8b8e8e	add Steve and Hoernchen to AUTHORS file	11 years ago
Dimitri Stolnikov	0efd28de6b	initial commit	11 years ago