Commit Graph

34 Commits

Author SHA1 Message Date
Dimitri Stolnikov 37b09bc559 update version to 0.1.2git 2014-03-31 23:55:36 +02:00
Dimitri Stolnikov f26fc5048c update version to 0.1.1 2014-03-31 23:46:14 +02:00
Dimitri Stolnikov 154c4ddd5f airspy: add support for AirSpy wideband receiver

Usage example:

osmocom_fft -a airspy

The following named gain stages are available:

LNA: 0 to 15, step 1
MIX: 0 to 15, step 1
IF: 0 to 15, step 1

At the moment the gains are not in dB but gain indices internal to R820t
2014-02-09 20:18:10 +01:00
Dimitri Stolnikov 4fe58149c1 cmake: fix flag passing to Clang compiler 2013-10-19 16:40:02 +02:00
Dimitri Stolnikov b196ee12c0 cmake: require Python v2 for build configuration
based on a gnuradio patch by Jiri Pinkava
2013-07-22 20:05:24 +02:00
Dimitri Stolnikov e5f7b28093 bladerf: add support for nuand LLC bladeRF (WIP)
This is based on the original work (
done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr.

The following modifications have been done in this commit:

* port to gr-osmosdr master codebase (gr3.7)
* moved shared properties to bladerf_common
* added & verified IF filter bandwidth setters
* set LMS6002D registers with values taken from FAQ 5.27
* print device information (serial/versions) on startup
* added fpga= and fw= device arguments to program MCU/FPGA
* added bladerf=# dev. arg. to select a specific bladeRF
* grc gain field controls RF path VGA for RX/TX
* grc BB gain field controls BB path VGA for RX/TX

Usage example:

osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf"

The following RX named gain stages are available:

LNA: 0 to 6 dB, in 3dB steps
VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib
VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB

The following TX named gain stages are available:

VGA1: -35 to -4 dB, in 1dB steps, BB side
VGA2: 0 to 25 dB, in 1dB steps, RF side

Thanks a lot to the team of nuand LLC for this major contribution.
2013-07-21 11:59:22 +02:00
Dimitri Stolnikov 3ce7c33981 fcd: add support for FUNcube Dongle Pro+
The gnuradio block must be
installed before building gr-osmosdr.

Available named gains:

Dongle Classic:

LNA: -5 to 30 dB, in 2.5 dB steps
MIX: 4 or 12 dB

Dongle Pro+:

LNA: 0 or 1, meaning off/on only. no information about real values.
MIX: 0 or 1, meaning off/on only. no information about real values.
BB: 0 to 59 dB, in 1 dB steps

This patch also introduces optional "device" and "type" arguments which
allow to override the values automatically picked by gr-osmosdr:

osmocom_fft -a "fcd,device=hw:2,type=2"

The "device" argument overrides the audio device used by the underlying
driver to access the dongle's IQ sample stream.

The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.

Thanks to Alexey Bazhin for the initial patch and Volker Schroer for
2013-07-14 12:09:55 +02:00
Dimitri Stolnikov f80cd288dc update version to 0.1.1git 2013-07-03 20:55:53 +02:00
Dimitri Stolnikov fd401eecc3 update version to 0.1.0 2013-07-03 20:48:15 +02:00
Dimitri Stolnikov 407be2c329 cmake: add gnuradio-pmt dependency for OSX linkage 2013-06-07 19:30:02 +02:00
Dimitri Stolnikov 834de6bc2d update revision to 0.1.0git 2013-05-30 17:07:28 +02:00
Dimitri Stolnikov 3e6a24e5d9 convert to gnuradio 3.7 interface 2013-05-29 22:34:40 +02:00
Dimitri Stolnikov 9912dcd1e6 update revision to 0.0.2git
for development of a gnuradio 3.7 version of the block
2013-05-28 20:23:28 +02:00
Dimitri Stolnikov a19c9f84ff update revision to 0.0.1
this is the last version for gnuradio 3.6
2013-05-28 20:13:01 +02:00
Dimitri Stolnikov de74870c04 cmake: make python support optional 2013-05-25 18:35:04 +02:00
Hoernchen eab1b61253 hackrf: default to sse2 on x86/64 2013-05-08 20:25:23 +02:00
Hoernchen 80b4ad2921 offer avx and sse to speed up float->uint8 for tx 2013-05-06 21:52:19 +02:00
Dimitri Stolnikov 59ceddbb74 cmake: add boost thread & system dependencies again
thanks to Alberto Albiol for pointing this out.
2013-05-01 13:51:35 +02:00
Jaroslav Škarvada 8578eee7ce allow docdir location override
Signed-off-by: Jaroslav Škarvada <>
Signed-off-by: Steve Markgraf <>
2013-04-14 17:39:02 +02:00
Jaroslav Škarvada 2f6592566b doxygen package needs to be detetected before the doxygen is used
Without this patch the DOXYGEN_EXECUTABLE is set too late which results
in build failure when processing swig directory (with ENABLE_DOXYGEN).

Signed-off-by: Jaroslav Škarvada <>
Signed-off-by: Steve Markgraf <>
2013-04-14 17:35:18 +02:00
Dimitri Stolnikov b999924d8e cmake: remove boost thread & system dependencies 2013-04-14 15:06:35 +02:00
Dimitri Stolnikov f5670788fc hackrf: add support for HackRF devices through libhackrf

- gain control for LNA & VGA
- frequency error correction
- automatic baseband filter
- up to 20M sampling rate


- no DC offset correction implemented (yet)
- no RX preamplifier control (disabled by default)
- high sampling rates may not work on slow machines
2013-04-10 21:05:14 +02:00
Dimitri Stolnikov fd56ae7640 adopt gnuradio component header structure
this makes it neccessary to include headers with the osmosdr/ prefix

thanks to Alexandru Csete for pointing this out.
2013-04-09 00:28:10 +02:00
Dimitri Stolnikov e415d843c7 add support for software IQ imbalance correction
this functionality depend on the gr-iqbal blocks developed by Sylvain
Munaut and is a compile time dependency:
2013-03-11 21:06:13 +01:00
Dimitri Stolnikov d11b7a2614 fake gnuradio cpack behavior as long as we don't use it directly 2013-02-10 18:13:44 +01:00
Dimitri Stolnikov 32dacffe84 Allows Unix systems with /usr/lib64 to use Boost installations in non-
this was taken from:
2013-02-10 18:01:53 +01:00
Dimitri Stolnikov 2878501284 add support for MSi2500 based DVB-T dongles through libmirisdr
this has been tested with analog modes only and still has to be
verified with the usual digital modes for proper implementation.
2012-09-30 20:12:48 +02:00
Dimitri Stolnikov 3a624df99b add boost-system library to dependency list
this seems to be required on OSX with boost 1.50+
2012-08-01 22:57:29 +02:00
Dimitri Stolnikov 9a5e93cf0d osmosdr: change implementation to use libosmosdr 2012-05-26 22:24:47 +02:00
Dimitri Stolnikov 52b5a8a4d3 uhd: added UHD as dependency for the gr-uhd based module
this may be required for compilation since the gnuradio trunk doesn't
provide UHD's include path via pkg-config.
2012-05-12 23:04:03 +02:00
Dimitri Stolnikov 1097fd7aba cleanup cmake files, remove libusb module 2012-05-12 22:43:21 +02:00
Dimitri Stolnikov 514b806d0a update build system to check for component dependencies
this will only enable components if the dependencies were met.
2012-04-26 19:13:23 +02:00
Hoernchen 519eb053bc fix for windows
Signed-off-by: Dimitri Stolnikov <>
2012-04-09 22:59:42 +02:00
Dimitri Stolnikov 0efd28de6b initial commit 2012-04-06 15:29:14 +02:00