gr-osmosdr/lib/config.h.in

#ifndef CONFIG_H_IN
#define CONFIG_H_IN

#define GR_OSMOSDR_VERSION "@VERSION@"
#define GR_OSMOSDR_LIBVER "@LIBVER@"

#cmakedefine ENABLE_OSMOSDR
#cmakedefine ENABLE_FCD
#cmakedefine ENABLE_FILE
#cmakedefine ENABLE_RTL
#cmakedefine ENABLE_RTL_TCP
#cmakedefine ENABLE_UHD
#cmakedefine ENABLE_MIRI
#cmakedefine ENABLE_SDRPLAY
#cmakedefine ENABLE_HACKRF
#cmakedefine ENABLE_BLADERF
#cmakedefine ENABLE_RFSPACE
#cmakedefine ENABLE_AIRSPY
#cmakedefine ENABLE_SOAPY

#endif // CONFIG_H_IN
update build system to check for component dependencies this will only enable components if the dependencies were met. 2012-04-26 17:13:23 +00:00			`#ifndef CONFIG_H_IN`
			`#define CONFIG_H_IN`

print version information in startup message 2013-02-16 23:11:22 +00:00			`#define GR_OSMOSDR_VERSION "@VERSION@"`
			`#define GR_OSMOSDR_LIBVER "@LIBVER@"`

update build system to check for component dependencies this will only enable components if the dependencies were met. 2012-04-26 17:13:23 +00:00			`#cmakedefine ENABLE_OSMOSDR`
			`#cmakedefine ENABLE_FCD`
file: initial file source support Example: file=/path/to/file.ext,freq=428e6,rate=1e6,repeat=true,throttle=true 2012-04-29 17:55:28 +00:00			`#cmakedefine ENABLE_FILE`
update build system to check for component dependencies this will only enable components if the dependencies were met. 2012-04-26 17:13:23 +00:00			`#cmakedefine ENABLE_RTL`
rtl_tcp: add initial component files For use with the rtl_tcp utility acting as a spectrum server. The "empty" rtl_tcp= device hint might be used to connect to rtl_tcp running on local machine. 2012-05-05 21:47:00 +00:00			`#cmakedefine ENABLE_RTL_TCP`
update build system to check for component dependencies this will only enable components if the dependencies were met. 2012-04-26 17:13:23 +00:00			`#cmakedefine ENABLE_UHD`
add support for MSi2500 based DVB-T dongles through libmirisdr this has been tested with analog modes only and still has to be verified with the usual digital modes for proper implementation. 2012-09-30 18:12:48 +00:00			`#cmakedefine ENABLE_MIRI`
Added SDRplay RSP support Initial build for SDRplay RSP support. Basic functionality, AGC etc. to be added 2015-03-04 20:35:59 +00:00			`#cmakedefine ENABLE_SDRPLAY`
hackrf: add support for HackRF devices through libhackrf features: - gain control for LNA & VGA - frequency error correction - automatic baseband filter - up to 20M sampling rate limitations: - no DC offset correction implemented (yet) - no RX preamplifier control (disabled by default) - high sampling rates may not work on slow machines 2013-04-10 18:42:43 +00:00			`#cmakedefine ENABLE_HACKRF`
bladerf: add support for nuand LLC bladeRF (WIP) This is based on the original work (https://github.com/Nuand/gr-osmosdr) done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr. The following modifications have been done in this commit: * port to gr-osmosdr master codebase (gr3.7) * moved shared properties to bladerf_common * added & verified IF filter bandwidth setters * set LMS6002D registers with values taken from FAQ 5.27 * print device information (serial/versions) on startup * added fpga= and fw= device arguments to program MCU/FPGA * added bladerf=# dev. arg. to select a specific bladeRF * grc gain field controls RF path VGA for RX/TX * grc BB gain field controls BB path VGA for RX/TX Usage example: osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf" The following RX named gain stages are available: LNA: 0 to 6 dB, in 3dB steps VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB The following TX named gain stages are available: VGA1: -35 to -4 dB, in 1dB steps, BB side VGA2: 0 to 25 dB, in 1dB steps, RF side Thanks a lot to the team of nuand LLC for this major contribution. 2013-07-20 16:14:20 +00:00			`#cmakedefine ENABLE_BLADERF`
rfspace: add support for RFSPACE SDR-IQ and SDR-IP Usage example: osmocom_fft -a sdr-iq=/dev/ttyUSB0 osmocom_fft -a sdr-ip=host[:port] osmocom_fft -a netsdr=host[:port][,nchan=2] The following named gain stages are available: SDR-IQ: ATT: -20 to +10 dB, in 10dB steps SDR-IP: ATT: -30 to 0 dB, in 10dB steps The ftdi_sio driver is being used for SDR-IQ. It creates a character device of the form: crw-rw---- 1 root dialout 188, 0 Dec 19 22:14 /dev/ttyUSB0 To be able to open the device without root permissions add yourself to the "dialout" group or do a "chmod 666 /dev/ttyUSB0" after pluggin in. 2013-12-18 22:55:10 +00:00			`#cmakedefine ENABLE_RFSPACE`
airspy: add support for AirSpy wideband receiver Requires https://github.com/airspy/host Usage example: osmocom_fft -a airspy The following named gain stages are available: LNA: 0 to 15, step 1 MIX: 0 to 15, step 1 IF: 0 to 15, step 1 At the moment the gains are not in dB but gain indices internal to R820t tuner. 2014-01-04 20:15:44 +00:00			`#cmakedefine ENABLE_AIRSPY`
soapy: began work on soapy sdr support 2015-02-16 01:57:12 +00:00			`#cmakedefine ENABLE_SOAPY`
update build system to check for component dependencies this will only enable components if the dependencies were met. 2012-04-26 17:13:23 +00:00
			`#endif // CONFIG_H_IN`